18参数广播星历分析研究

针对18参数广播星历模型对混合星座（包含GEO（地球同步轨道）、IGSO（倾斜地球同步轨道）、MEO（中地球轨道））的拟合精度和稳定性问题,利用摄动理论中的分析方法研究18参数广播星历模型新增参数的物理意义,通过数值仿真比较分析18参数模型与16参数模型对混合星座的拟合精度和稳定性。分析研究表明,新增2个参数可以较好地逼近轨道变化的长周期项,相同拟合弧长的拟合精度比16参数提高了50%左右,但受短周期项影响,拟合不够平稳,同时由于轨道变化特征的差异,对GEO和IGSO卫星的拟合不如MEO卫星稳定。数值仿真结果表明,要保证稳定性必须增加拟合弧长,但拟合精度会有一定下降,18参数条件下,MEO卫星选用3h拟合弧长能保持很好的稳定性,GEO和IGSO卫星则需要选择5h拟合弧长。     

“火卫1”轨道预报与动力学分析

使用数值积分的方法对"火卫1"(Phobos)轨道进行预报计算,介绍了计算"火卫1"轨道时考虑的动力模型与数值积分方法,分析了不同动力模型及参量对轨道计算结果的影响,并确定最终选择的模型。最后将计算结果与不同机构发布的最新历表进行比较,计算位置和轨道根数的差异。得到的结果与各星历之间差异的量级相同,进而验证了相关模型和算法的精度和可靠性。该轨道预报算法模型与分析结果将对"火卫1"探测任务提供参考。     

基于实时SSR数据的LEO卫星精密单点定位研究

对目前低轨卫星实时定位的方法进行了研究,现在通常采用GPS定位,使用广播星历和普通晶振,实时定位精度一般在10m以内,不能满足高精度实时定位的需求。IGS组织在全球范围内对GPS跟踪分析,生成精密星历、精密钟差产品、按SSR格式的广播星历和钟差修正产品并在网上发布。对这些IGS产品进行了调查,提出在现有测控支持情况下,可以通过高密度上注SSR信息流实现在轨高精度定位。以某型号低轨微小卫星在轨导航增强载荷为应用背景,用IGS03产品中的1057和1058数据对双频GPS接收机的星历和钟差进行修正,采用递推最小二乘估计和LAMDA模糊度固定过对载波相位和伪距信息进行处理,在短时间内获得亚米级定位结果。     

Performance assessment of real-time orbit determination for the Haiyang-2D using onboard BDS-3/GPS observations

The Global Navigation Satellite System (GNSS) receivers equipped on the Haiyang-2D (HY-2D) satellite is capable of tracking the signals of both the third generation of BeiDou satellite navigation System (BDS-3) and the Global Positioning System (GPS), which make it feasible to assess the performance of real-time orbit determination (RTOD) for the HY-2D using onboard GNSS observations. In this study, the achievable accuracy and convergence time of RTOD for the HY-2D using onboard BDS-3 and GPS observations are analyzed. Benefiting from the binary-offset-carrier (BOC) modulation, the BDS-3 C1X signal includes less noise than the GPS C1C signal, which has the same signal frequency and chipping rate. The root mean squares (RMS) of the noises of C1X and C1C code measurements are 0.579 m and 1.636 m, respectively. Thanks to a ten-times higher chipping rate, the code measurements of BDS-3 C5P, GPS C1W and C2W are less noisy. The RMS of code noises of BDS-3 C5P, GPS C1W, and C2W are 0.044 m, 0.386 m, and 0.272 m, respectively. For the HY-2D orbit, the three-dimensional (3D) and radial accuracies can reach 31.8 cm and 7.5 cm with only BDS-3 observations, around 50 % better than the corresponding accuracies with GPS. Better performance of the BDS-3 in RTOD for the HY-2D is attributed to the high quality of its broadcast ephemeris. When random parameters are used to absorb ephemeris errors, substantial improvement is seen in the accuracy of HY-2D orbit with either BDS-3 or GPS. The 3D RMS of HY-2D orbit errors with BDS-3 and GPS are enhanced to 23.1 cm and 33.6 cm, and the RMS of the radial components are improved to 6.1 cm and 13.3 cm, respectively. The convergence time is 41.6 and 75.5 min for the RTOD with BDS-3 and GPS, while it is reduced to 39.2 and 27.4 min after the broadcast ephemeris errors are absorbed by random parameters. Overall, the achievable accuracy of RTOD with BDS-3 reaches decimeter level, which is even better than that with GPS, making real-time navigation using onboard BDS-3 observations a feasible choice for future remote sensing missions.     

基于B1c/B2a/B3I北斗三频实时 高采样率动态PPP分析

为了分析北斗三号新信号的三频实时动态PPP定位性能，首先推导了三频两两组合无电离层模型和三频非差非组合模型的观测方程。基于山东建筑大学CORS站观测得到的北斗三号B1c/B2a/B3I三频信号1s采样率数据，使用iGMAS提供的超快速精密星历预报部分，制定了基于B1cB3I-B2aB3I三频无电离层两两组合、B1cB2aB3I三频非差非组合以及用于对比分析的B1cB2a、B1IB3I两种双频无电离层共四种定位方案。然后利用Net_Diff软件进行实时动态PPP实验，对超快速精密轨道和钟差预报部分的精度和稳定度以及实验解算结果进行分析，对比不同定位方案的定位性能。实验分析表明，两种三频定位方案定位性能均优于B1cB2a双频定位方案，定位精度能达到0.462m和0.479m，收敛至分米所需时间能达到45.8min和62.8min；B1IB3I方案定位性能优于两种三频定位方案，定位精度和收敛速度能达到0.228m和6.6min。