双后掠鸭翼气动特性的数值模拟

首先针对具有中等前缘后掠角梯形鸭翼的缺点提出双后掠鸭翼概念,然后分别对安装梯形鸭翼和双后掠鸭翼的近距耦合鸭式布局的气动性能进行数值模拟研究,分析影响双后掠鸭翼气动性能的流动机理。研究表明：在大迎角时,对于双后掠鸭翼,具有较大前缘后掠角的外翼段可以使鸭翼涡在涡核破裂后仍能形成稳定集中涡并保持较高的强度,增加鸭翼本身的失速迎角,并通过诱导作用改善机翼外翼段流场,进而提高全机大迎角性能,但在小迎角时会破坏鸭翼附着流或前缘气泡涡的发展,造成略微的升力损失。拥有较大失速迎角的双后掠鸭翼在小迎角时具有较大的可用偏度,可以增强布局的抬头控制能力。双后掠鸭翼在满足隐身约束的前提下,超声速阻力较小,具有较好的超声速性能。     

翼型前缘变形对动态失速效应影响的数值计算

翼型或机翼的动态失速效应所引起的低头力矩和正气动阻尼限制了飞行器气动性能的提高,甚至可能诱导发生不稳定运动。应用于小尺寸机翼的前缘动态变形（DDLE）技术,通过实时改变前缘形状,能够改善翼型前缘区域的速度梯度,进而抑制动态失速效应。采用转捩剪切应力输运（SST）黏性模型结合分区混合动态网格技术,研究了这种前缘变形对机翼俯仰运动所引起的非定常流动的影响,得到通过小幅度前缘变形抑制和延迟动态失速的方法,从而提高翼型的气动性能。翼型NAC A0012的数值模拟结果与动态失速风洞试验结果比较表明：所使用的数值计算方法能够较为准确地模拟翼型在动态失速过程中升力系数与俯仰力矩系数的变化情况,可用于研究前缘变形对翼型俯仰运动所引起的非定常流动的影响。前缘动态变形翼型俯仰运动过程的非定常流场的数值模拟表明：在大迎角下不同幅度的前缘下垂运动能够抑制流动分离的发生,从而抑制动态失速,但在大迎角下小幅度高频率的前缘下垂变形能更高效地抑制动态失速;前缘变形幅度以及变形沿中弧线的分布对升力系数和俯仰力矩系数的影响并不明显。     

环管型燃烧室火焰筒壁温气热耦合数值模拟

针对某型燃气轮机运行时回流式环管型燃烧室的火焰筒常发生烧蚀和裂纹,需获取其火焰筒壁温分布特点,进行分析以提出改进措施.全面考虑固体导热和辐射传热、气体与固体间的对流换热以及火焰和燃气的辐射,对燃烧室进行三维气热耦合数值模拟计算,获取流场、温度场以及壁温分布信息,并结合实验验证了三维气热耦合数值模拟能够较有效预测火焰筒壁温分布.由模拟结果知该型火焰筒壁温未超过设计值1 223K,但在联焰管与筒体连接处以及多个主燃孔处的温度较高、温度梯度较大,需要对这些部位的冷却方案进行改进.     

在制品管理中条码技术的应用

针对面向订单的单件、小批量生产制造企业,设计了一套条码数据采集系统,分析了主要运作流程和功能模块.在在制品的管理中提出了基于不同级别的工件生产状态定义,并给出了相应的加工、检验判定准则.经实际使用证明条码技术运用于工业现场是可行的.     

不确定参数结构特征值问题的概率统计方法和区间分析方法的比较

 基于区间数学理论、灵敏度分析理论、Kronecker代数理论,应用Taylor级数展开、概率摄动技术,提出了具有不确定参数结构的特征值问题的区间分析方法。结合工程实例与传统的概率分析方法进行比较,给出了两种方法的数值解法及各自解法的Kronecker代数形式。数值算例的结果显示了区间分析方法在具有不确定参数结构特征值问题分析中的价值和有效性。     

铝合金T型材拉弯成形的有限元模拟

针对目前拉弯成形中的问题,采用有限元模拟的方法,对带下陷拉弯过程进行计算机仿真,得到优化后的工艺参数,避免了盲目的试拉,提高了加工效率,降低了拉弯成本,积累了带下陷拉弯成形的经验,提高了公司拉弯工艺水平。     

深空探测器定位在共线平动点附近的线性策略

深空探测器需要定位在日-地(月)系的共线平动点L1或L2附近执行探测任务,但由于共线平动点的不稳定性,必须在运行期间进行轨控。对于条件周期轨道(如晕轨道)必须在控制过程中考虑高次项,控制条件复杂,技术上实现相对困难。而某些探测任务,探测器定位在共线平动点附近的条件拟周期轨道(对应L issajous轨道)上亦可以。这种类型的轨道可以离共线平动点较近,那么只需要在控制过程中考虑线性项即可,控制条件简单。以圆型限制性三体问题作为基本模型,采用预估-校正法逼近线性化模型下的目标轨道,给出在轨运行期间的轨控策略亦是可取的,这种控制措施相对而言较简单,容易实现。仿真计算结果表明是可行的,能够提供较高的位置精度。     

某起落架正常收／放系统失效原因分析

正确运用246雷达天线“正常或应急”液压操纵开关和液压马达壳体回油“正常或应急”开关的工作状态，关系到飞机液压操纵系统的安全性。若天线液压操纵开关和马达壳体回油开关配合不当，将引起飞机液压操纵系统失效。     

Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.