金属表面腐蚀损伤演化过程的元胞自动机模拟

 用一个简单的元胞自动机从介观的角度对腐蚀环境中金属表面的腐蚀损伤演化过程进行研究。假定腐蚀体系为扩散过程控制的金属腐蚀体系,定义了简单的局部规则反映腐蚀现象中的基本化学物理过程,例如质量转移、金属溶解和钝化过程等。对于单个蚀坑,得到了蚀坑等效半径随模拟时间的变化曲线;对于多个蚀坑,认为蚀坑的成核时间服从威布尔分布,通过对该分布函数进行随机抽样,使得在不同时刻金属表面会随机产生大量的蚀坑,对金属表面的腐蚀损伤情况进行模拟,得到了表面腐蚀损伤度随模拟时间的变化规律。结果表明元胞自动机法可以用于腐蚀损伤演化过程的模拟,这对于更好地进行腐蚀损伤的量化及结构完整性的评估有着重要的实际意义。     

地面力学在火星壤力学参数估计研究中的 进展与展望

掌握火星土壤的力学参数是保障火星车顺利完成巡视探测的关键。通过对已成功开展的火星巡视探测任务进行汇总，探讨了复杂火星地貌对火星车移动性能的影响，分析了基于地面力学理论的火星土壤力学参数估计方法，包括：基于车轮的火星壤在轨力学参数估计方法和基于轮壤力学模型的力学参数辨识方法。最后，对未来关于地面力学在星壤力学参数评估进行了探讨。     

Real-time sensor fault detection and isolation for LEO satellite attitude estimation through magnetometer data

Attitude estimation is a critical component of the Attitude Determination and Control System (ADCS) of any satellite. It is used to convert the sensor observation data to an estimated attitude using filtering algorithms. However, in the presence of sensor faults, the ADCS fails to achieve the desired attitude accuracy. In this paper, the Fault Tolerant Extended Kalman Filter (FTEKF) is proposed to handle this imperfection. In accordance, various filtering steps are included in the FTEKF design to enhance both attitude estimation and sensor fault detection. The developed algorithm can detect and isolate any unexpected sensor faults in real time, which provides a reliable attitude estimation. A comparative study with the classical and robust Kalman filters is performed through numerical simulations in order to validate the effectiveness of the adopted filter in case of magnetometer fault data.     

收敛-扩张喷管中运用次流推力矢量控制技术的计算研究

采用二阶1TVD格式的有限体积法耦合RNGκ-ε湍流模型和非平衡壁面函数求解二维守恒型雷诺平均N-S方程,数值模拟了运用次流椎力矢量控制技术的二维收敛-扩张喷管中的流动现象。计算结果表明,随着喷管压比的增加,次流喷射所产生的激波向扩张段下游移动,且喷管矢量角不断减小到一固定值;次流压比的增加将导致激波向扩张段上游移动,且喷管矢量角不断增加;次流压比对激波和矢量角的影响比喷管压比更强。     

High-cycle fatigue behavior of Co-based superalloy 9CrCo at elevated temperatures

A modified model is developed to characterize and evaluate high-cycle fatigue behavior of Co-based superalloy 9CrCo at elevated temperatures by considering the stress ratio effect. The model is informed by the relationship surface between maximum nominal stress, stress ratio and fatigue life. New formulae are derived to deal with the test data for estimating the parameters of the proposed model. Fatigue tests are performed on Co-based superalloy 9Cr Co subjected to constant amplitude loading at four stress ratios of 1, 0.3, 0.5 and 0.9 in three environments of room temperature(i.e., about 25 °C) and elevated temperatures of 530 °C and 620 °C, and the interaction mechanisms between the elevated temperature and stress ratio are deduced and compared with each other from fractographic studies. Finally, the model is applied to experimental data, demonstrating the practical and effective use of the proposed model. It is shown that new model has good correlation with experimental results.     

Modified fast Fourier transform in FBMC for satellite communications

In this paper,a Doppler scaling fast Fourier transform (Doppler-FFT) algorithm for filter bank multi-carrier (FBMC) is proposed,which can efficiently eliminate the impact of the Doppler scaling in satellite communications.By introducing a Doppler scaling factor into the butterfly structure of the fast Fourier transform (FFT) algorithm,the proposed algorithm eliminates the differences between the Doppler shifts of the received subcarriers,and maintains the same order of computational complexity compared to that of the traditional FFT.In the process of using the new method,the Doppler scaling should be estimated by calculating the orbital data in advance.Thus,the inter-symbol interference (ISI) and the inter-carrier interference (ICI) can be completely eliminated,and the signal to interference and noise ratio (SINR) will not be affected.Simulation results also show that the proposed algorithm can achieve a 0.4 dB performance gain compared to the frequency domain equalization (FDE) algorithm in satellite communications.     

某型直升机液压减摆器渗油故障的排除

介绍了某型直升机液压减摆器的结构特点和密封原理,用故障树的方法梳理了影响液压减摆器渗油的原因,针对一特定案例进行了渗油原因分析,并制定了相应的改进措施。     

基于碳氢燃料裂解工作的ATR发动机性能分析

提出了一种基于碳氢燃料裂解气体驱动涡轮工作的ATR发动机方案,并对特定裂解气成分的碳氢ATR发动机性能进行计算,获得了裂解气中烷/烯比对发动机性能的影响规律。结果表明,在同一飞行条件下,随着发动机转速上升,推力逐渐上升,比冲基本呈减小趋势;在同一转速下,碳氢燃料裂解气中烷/烯比越大,发动机比冲越高。在烷/烯比4、转速百分比70%条件下,发动机比冲最高达到约7 644 m/s;随着烷/烯比逐渐升高,裂解气比热容逐渐升高。     

面向GPU快速处理的地面材质数据压缩方法 陆巍巍 1,徐涛2,徐珂文 1

为解决雷达图像仿真中海量地面材质数据的存储和加载问题,采用基于自适应最大行程长度编码和修正 偶对的压缩算法进行材质数据的压缩,从而有效地减少了数据的存储量,消除数据传输的瓶颈,提高了数据传输的 吞吐能力。压缩算法面向 GPU快速处理,得到压缩数据适用于 GPU进行快速解压。