Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

Multi-mode diagnosis of a gas turbine engine using an adaptive neuro-fuzzy system

Gas Turbine Engines (GTEs) are vastly used for generation of mechanical power in a wide range of applications from airplane propulsion systems to stationary power plants. The gas-path components of a GTE are exposed to harsh operating and ambient conditions, leading to several degradation mechanisms. Because GTE components are mostly inaccessible for direct measurements and their degradation levels must be inferred from the measurements of accessible parameters, it is a challenge to acquire reliable information on the degradation conditions of the parts in different fault modes. In this work, a data-driven fault detection and degradation estimation scheme is developed for GTE diagnostics based on an Adaptive Neuro-Fuzzy Inference System (ANFIS). To verify the performance and accuracy of the developed diagnostic framework on GTE data, an ensemble of measurable gas path parameters has been generated by a high-fidelity GTE model under (a) diverse ambient conditions and control settings, (b) every possible combination of degradation symptoms, and (c) a broad range of signal to noise ratios. The results prove the competency of the developed framework in fault diagnostics and reveal the sensitivity of diagnostic results to measurement noise for different degradation symptoms.     

硅半球深腔结构无损检测技术

半球深腔的加工质量是决定硅基MEMS半球陀螺精度的关键因素之一，及时检测半球深腔的形貌参数并将其反馈至加工过程，是确保高性能MEMS半球陀螺研制成功的重要措施。由于硅半球深腔的深度较大，台阶仪和光学显微成像系统无法对半球深腔的形貌特征进行有效测量。因此,需要将硅深腔结构剖开后采用扫描电镜(SEM)进行检测。这种检测方式时间周期长，且属于破坏性的样本检测，效率和测试精度都较低。提出以硅半球深腔为模具，利用PDMS铸模将硅半球深腔的结构尺寸和表面形貌转移到PDMS凸起的半球模型上，通过检测PDMS半球模型的尺寸结构和表面形貌，即可反推出硅半球深腔的尺寸特征。经实验验证，脱模后的PDMS模型可以准确地反映出半球深腔的尺寸信息，测量结果的不确定度小于5‰，有效解决了硅半球深腔无损检测的难题。     

某型飞机通信电台干扰油量系统故障分析

针对某型飞机通信电台干扰油量系统故障，分析了油量测量系统的原理和电磁干扰机理，研究了故障发生的原因，制定了抑制干扰的措施，解决了一直困扰修理的油量指示系统跳变问题，提高了飞机修理质量。     

HED-21S数控综合实验台画笔自动控制机构设计

以数控系统的PLC控制为基础,设计HED-21S机械笔控制系统结构,它可控制电磁铁的动作,执行画笔的上下运动。这支笔在X、Z型十字窗格可以绘制任意几何形状,该设计符合要求的快速定位数控直线移动,及圆弧插补功能,有助于提高数控编程效率和数控教学质量。     

基于卫星和星敏感器的冗余激光惯组在轨标定

采用高精度卫星导航速度、位置信息以及星敏感器提供的姿态信息设计十表冗余捷联惯组的标定模型,包含陀螺和加速度计的零次项和标度因数,对卫星和星敏感器辅助的冗余激光陀螺捷联惯组进行实时在轨标定.利用标准Kalman滤波和Sage-Husa自适应滤波作为估计算法,对十表冗余捷联惯组参数进行在线估计.数值仿真结果表明:参数标定精度均在7％以内,是一种实时的在轨标定方法,满足误差补偿要求.冗余惯组在轨标定方法为航天器高精度定姿和定轨提供了一种理论参考.     

存在外部干扰的网络控制系统故障检测和优化

针对存在时延和丢包的网络控制系统,研究了系统的故障检测滤波器设计和优化设计问题.通过泰勒展开将未知时延处理成外界干扰,采用伯努利随机过程来描述丢包现象.设计观测器产生残差信号,将故障检测问题转化为H∞滤波问题.通过Lyapunov函数方法分析了系统的稳定性.以线性矩阵不等式的形式给出了滤波器存在的充分条件和求解方法.为进一步提高系统对故障信号的灵敏度,采用了一种优化设计方法对故障检测系统进行了优化.最后通过仿真验证了算法的有效性.     

微磁强计弱磁处理芯片设计与实现

为适应微纳卫星平台的应用需求、实现磁强计的微型化,针对巨磁阻抗(GMI)效应微磁强计的研制需求设计并研制了弱磁信号处理芯片.在分析GMI微磁强计构造的基础上,针对单机(微)小型化提出了弱磁信号处理电路芯片化的方案;结合空间应用特点,设计并实现了基于SOI CMOS工艺的弱磁信号处理芯片.实测结果表明:基于所研制的弱磁信号处理芯片不仅实现了磁强计的微型化、集成化,而且具有良好的弱磁测量性能.     

低轨卫星月影事件预报优化

针对卫星月影问题,提出了一种低轨卫星优化的月影预报策略,可以有效提高目前低轨卫星在轨管理时对月影事件预报的效率.结合仿真对产生月影事件的太阳、地球、月球的三体关系进行了分析,首先给出了月影产生的解析分析方法,并通过对一个三维月影影响模型的分析,得到了月影影响区间的判定要素——月影临界角;然后进一步通过对月影临界角的分析,提出了基于太阳与白道面的位置关系和月影临界角对低轨卫星月影事件的优化预报方法;最后基于大量的随机低轨卫星场景对本方法的正确性进行了验证.研究结果表明,此方法能够较大地提高月影预报效率,可以将月影预报频率从每月1次降低到每年2次,从而简化了低轨卫星在轨运行管理的任务复杂度,为卫星的在轨可靠运行提供支持.