轻型通用飞机起飞总重估算方法研究

飞机的起飞总重是飞机的重要设计参数,概念设计阶段首先要做的重要工作之一就是确定飞机的起飞总重。以四人座低速活塞螺旋桨飞机为例,采用任务剖面法和商载航程法分别对起飞总重进行了估算,并对两种方法进行了修正,在此基础上,取两个计算结果的平均值作为最终的起飞总重估算值。通过与对比机型的比较,验证修正后的计算方法和结果是准确合理的,为通用飞机起飞总重的确定和选择提供了参考。     

LARES successfully launched in orbit: Satellite and mission description

On February 13th 2012, the LARES satellite of the Italian Space Agency (ASI) was launched into orbit with the qualification flight of the new VEGA launcher of the European Space Agency (ESA). The payload was released very accurately in the nominal orbit. The name LARES means LAser RElativity Satellite and summarises the objective of the mission and some characteristics of the satellite. It is, in fact, a mission designed to test Einstein's General Relativity Theory (specifically ‘frame-dragging' and Lense-Thirring effect). The satellite is passive and covered with optical retroreflectors that send back laser pulses to the emitting ground station. This allows accurate positioning of the satellite, which is important for measuring the very small deviations from Galilei–Newton's laws. In 2008, ASI selected the prime industrial contractor for the LARES system with a heavy involvement of the universities in all phases of the programme, from the design to the construction and testing of the satellite and separation system. The data exploitation phase started immediately after the launch under a new contract between ASI and those universities. Tracking of the satellite is provided by the International Laser Ranging Service. Due to its particular design, LARES is the orbiting object with the highest known mean density in the solar system. In this paper, it is shown that this peculiarity makes it the best proof particle ever manufactured. Design aspects, mission objectives and preliminary data analysis will be also presented.     

基于有向图模型的卫星任务指令生成算法

面向任务的卫星操控模式具有操作简便、星载资源使用效率高的优点,正在取代指令序列注入成为遥感卫星运控的新模式。文章提出一种基于有向图模型的遥感卫星任务指令序列生成算法,具有线性存储复杂度和计算复杂度,适合存储资源和计算资源受限的星载计算机应用。此算法已在某遥感卫星应用,测试试验表明,采用3个面向任务的高级指令即可生成52种指令序列,任务上行注入效率提升了5倍。本文方法根据有效载荷的使用约束条件,配置有向图模型参数,即可满足各种类型卫星使用。     

航迹规划中雷达探测空间的生成

从飞机突防习行任务规划出发，综合考虑地球曲率、陆地（或海洋）的反射和杂波干扰、大气折射和吸收损耗等因素的影响，采用临界散射截面法生成了对空警戒雷达在不同地貌、发现概率下，对不同雷达散射截面的目标的探测空间。计算并分析了飞行高度、目标雷达散射截面、发现概率和地貌等因素对雷达探测空间的影响，以便选择低探测概率的飞行走廓，这对制定和实施安全突防飞行策略有实际意义。     

Deep Impact Mission Design

The Deep Impact mission is designed to provide the first opportunity to probe below the surface of a comet nucleus by a high-speed impact. This requires finding a suitable comet with launch and encounter conditions that allow a meaningful scientific experiment. The overall design requires the consideration of many factors ranging from environmental characteristics of the comet (nucleus size, dust levels, etc.), to launch dates fitting within the NASA Discovery program opportunities, to launch vehicle capability for a large impactor, to the observational conditions for the two approaching spacecraft and for telescopes on Earth.     

Progress on Solar Physics Research in China

The progress on Chinese Space Solar Telescope (SST) in 2002-2004 is introduced. The documentations on plans and outlines based on the standards of Chinese aerospace industry for SST mission has been fulfilled. The key technical problems of SST satellite platform and payloads are tackled during pre-study stage of the mission. The laboratory assembly and calibration of the main optical telescope of 1.2 m spherical mirror and 1 m plain mirror have been carried out with the accuracy of λ/40 and λ/30, respectively. The prototype at 17.1 nm for extreme ultraviolet telescope is under development and manufacture with a diameter of 13 cm. Its primary and secondary mirrors have a manufacturing error of 5 nm with a roughness degree of less than 0.5 nm and a multiplayer reflection factor of better than 20%. The on-board scientific data processing unit has been developed. Prototypes for other payloads such as H. and white light telescope, wide band spectroscopy in high energy and solar and interplanetary radio spectrometer have been developed accordingly.     

Current status of the BepiColombo/MMO spacecraft design

This paper shows the current baseline of the conceptual design of the BepiColombo/MMO (mercury magnetospheric orbiter) spacecraft, which is conducted by the ISAS Mercury Exploration Working Group. The MMO is a spinning spacecraft of 200 kg mass whose spin axis is nearly perpendicular to the Mercury orbital plane. The current status of the overall MMO system and subsystems such as thermal control, communication, power, etc. are described. The latest status of the development of critical technologies for the MMO and the outline of the international cooperation between ESA and ISAS are also presented.     

SAX overview

Information is given concerning the satellite for X-Ray Astronomy SAX, a project of the Italian Space Agency in collaboration with the Netherlands Agency for Aerospace Programs, due for launch at end 1993.

The scientific objectives and the payload are described, together with the ground system structure and organization.     

Space Astronomy in China： 2006-2008

In 2006 to 2008,the main activities in Chinese space astronomy focus on:(1)undertaking some missions set by CNSA,like HXMT,SMESE,wso/vv,SST,KUAFU,and so on;(2)drawing up a long-term plan of Chinese space astronomy.This paper summarizes in brief all these activities.     

我国空间站安全与任务保证工作若干问题探讨

从我国空间站运营阶段对安全性、可靠性、维修性及质量保证(SRMQA)工作的需求出发,在系统分析国外载人航天安全与任务保证(SMA)工作体系的基础上,总结国际空间站安全性可靠性工作的先进经验,并针对我国空间站对航天员安全、寿命与可靠性要求更高的需求,从管理和技术应用两个方面,系统论述了我国空间站安全与任务保证应重点开展的安全性、寿命与可靠性等工作。