涉及亏值的亚纯函数唯一性

结合亚纯函数的亏值，讨论了当高阶导数具有一个分担值或分担函数时两个亚统函数的等价性，得出两点结论：（１）设ｆ与ｇ是两个亚约函数，满足δ（∞，ｆ）＝δ（∞，ｇ）＝１．若对某个ｎ≥１有ｆ（ｎ）与ｇ（ｎ）分担值１，且，则ｆ（ｎ）·ｇ（ｎ）≡１或ｆ－ｇ≡ｋ。（２）设ｆ与ｇ为整函数，满足，若对某个ｎ≥１，ｆ（ｎ）与ｇ（ｎ）分担值１，δ（０，ｆ）＞０且０为ｇ的Ｐｉｃａｒｄ例外值，则ｆ≡ｇ或。     

用Calspan式管测量显示亚声速流动

用上、下二根 Calspan 式管可满意地测量亚声速风洞通气壁附近的流动状态,从而可以用来进行洞壁干扰修正或自适应壁风洞迭代计算。从理论上分析,根据 Calspan 式管上、下孔测得的压力分布值,可计算出流向与法向的扰动速度分量。文章对 Calspan 式管的构造作了详细的介绍,并对试验装置及所使用的仪器和传感器作了说明。由于所测得的量值很小,介绍了试验的方法和采集数据的处理方法。     

转子系统模态理论的特点和应用

本文从无阻尼系统出发,理论上分析了转子系统振动方程的特征根,特征向量所具有的特点。除讨论正交性外,还进行了模态空间完备性的分析,推出转子系统强迫振动响应的解析表达式和传递函数的表达式,为参数辨识提供了理论依据。     

谱载下基于模糊Miner法则的疲劳寿命估算

在载荷谱中,当疲劳应力稍低于疲劳极限时,对构件是否造成损伤呈现出某种"模糊"过渡状态.运用模糊数学的隶属函数,建立了考虑"模糊"损伤状态的Miner法则.按照常规Miner法则和模糊Miner法则,分别给出了程序块谱作用下疲劳寿命的估算公式.实例估算与试验结果的对比表明:采用模糊Miner法则,可使疲劳寿命的估算误差减少18.33%.     

直线度误差目标函数凸凹性的研究

证明了直线度误差最小区域评定法的目标函数是一维欧式空间R1中的连续、不可微的凸函数 ,从而证明了目标函数的全局极小值是唯一的。     

Structural dynamic responses of a stripped solar sail subjected to solar radiation pressure

The stripped solar sail whose membrane is divided into separate narrow membrane strips is believed to have the best structural efficiency. In this paper, the stripped solar sail structure is regarded as an assembly made by connecting a number of boom-strip components in sequence. Considering the coupling effects between booms and membrane strips, an exact and semi-analytical method to calculate structural dynamic responses of the stripped solar sail subjected to solar radiation pressure is established. The case study of a 100 m stripped solar sail shows that the stripped architecture helps to reduce the static deflections and amplitudes of the steady-state dynamic response. Larger prestress of the membrane strips will decrease stiffness of the sail and increase amplitudes of the steady-state dynamic response. Increasing thickness of the boom will benefit to stability of the sail and reduce the resonant amplitudes. This proposed semi-analytical method provides an efficient analysis tool for structure design and attitude control of the stripped solar sail.     

An update global model of hmF2 from values estimated from ionosonde and COSMIC/FORMOSAT-3 radio occultation

In this paper, we present our recent work on developing an updated global model of the ionospheric F2 peak height hmF2 parameter by combining data from the Constellation Observing System for Meteorology, Ionosphere and Climate (COSMIC/FORMOSAT-3) radio occultation (RO) measurements and from the extended global ionosonde stations. In particular, 10 Chinese ionosonde stations’ data are newly introduced into this study. The modeling technique used is based on a two-layer empirical orthogonal function (EOF) expansion. Global distributions of hmF2 maps calculated using the newly constructed global model and the one provided by the International Reference Ionosphere model (IRI-ITU-R) are compared with the global distributions of hmF2 obtained by the COSMIC RO measurements and quantitative statistical analysis of the differences between the model results and those of the COSMIC RO measurements is made for the low (2008) and high (2012) solar activity years. The obtained average root-mean-square differences (RMSEs) for our model are 27.7 km (11.1%) and 31.0 km (9.8%), respectively for the years 2008 and 2012, whereas those for the IRI-ITU-R model are 39.9 km (16.9%) and 35.0 km (11.6%), respectively. Comparison of the results calculated both by our model and the IRI-ITU-R model with the digisonde observation is also made. The comparisons show that the newly constructed global hmF2 model can reproduce reasonably well the observations and perform better than IRI-ITU-R model.     

一种姿控动力装置热防护研究

酚醛树脂作为一种烧蚀材料,凭借其耐高温的特性应用于航天器防热系统,其防热性能在工程实际中需进行考核。以某航天器一段包覆80纤维布/酚醛树脂的液路管路作为研究对象,以定热流为边界条件,采用仿真计算和热流试验的研究方法对空导管以及注水导管的温度场进行研究:仿真计算得出导管表面平衡温度分布以及导管表面具有代表性某点瞬态温度变化;为验证仿真计算的准确性,进行了热流试验,得出了导管表面以及水中温度测点的瞬态温度变化;根据热流试验的温度结果,分析比对了热流试验对仿真计算的验证情况。研究结果表明:80纤维布/酚醛树脂的防热性能符合温度指标要求;仿真结果和热流试验结果一致度良好,证明了仿真计算的合理性和准确性。     

On extended thermonuclear functions through pathway model

The major problem in the cosmological nucleosynthesis is the evaluation of the reaction rate. The present scenario is that the standard thermonuclear function in the Maxwell–Boltzmann form is evaluated by using various techniques. The Maxwell–Boltzmannian approach to nuclear reaction rate theory is extended to cover Tsallis statistics (Tsallis, 1988) and more general cases of distribution functions. The main purpose of this paper is to investigate in some more detail the extended reaction probability integral in the equilibrium thermodynamic argument and in the cut-off case. The extended reaction probability integrals will be evaluated in closed form for all convenient values of the parameter by means of residue calculus. A comparison of the standard reaction probability integrals with the extended reaction probability integrals is also done.     

PCB电源地层腔模辐射快速算法

电路板电源总线的分析非常复杂,虽然传统腔模方法是分析电路板电源总线的一种非常有效的方法,但是该方法具有收敛速度慢,计算时间长和不能分析电源总线辐射发射的缺点.在该算法的基础上,改进二重级数和形式的电源总线辐射发射方法并提出了单一级数和形式的电源总线辐射发射表达式.在此基础上指出了单一级数腔模理论解的适用条件,并对该快速算法的收敛性进行了分析.分析表明,该方法减少了传统二重级数求和的计算工作量,提高了收敛效率并节省了计算时间,而且能够有效逼近双级数腔模辐射算法的计算结果.通过对电路板的辐射发射数值仿真验证了该算法的有效性和正确性.