卫星结构中的非金属材料

介绍了各种复合材料、胶粘剂、高分子材料和工业陶瓷等非金属材料的性能及其在卫星结构中的应用情况。强调了非金属材料在提高卫星性能、减轻卫星结构质量，以及增大卫星有效栽荷方面的作用。最后指出了卫星结构材料高性能、多功能、复合化、智能化、低成本以及高环境相容性的发展趋势。     

高精度YAG超平光学基片高效范成法超精磨削的研究

随着YAG新型显示材料制成的高清晰度电视即将投放市场，使得YAG光学基片的批量生产和成本问题面临严峻考验．为了保证产品质量和企业生产效益，提出了大直径高精度YAG光学基片范成法超精磨削的设想．通过实验验证表明，该方法不仅能高效高质量生产合格的YAG光学基片，大幅度降低制造成本，而且为该方法在其它光学材料加工上的应用也奠定了基础．     

Grinding performance evaluation of porous composite-bonded CBN wheels for Inconel 718

For high-efficiency grinding of difficult-to-cut materials such as titanium and nickel alloys, a high porosity is expected and also a sufficient mechanical strength to satisfy the function.However, the porosity increase is a disadvantage to the mechanical strength. As a promising pore forming agent, alumina bubbles are firstly induced into the abrasive layer to fabricate porous cubic boron nitride（CBN） wheels. When the wheel porosity reaches 45%, the bending strength is still high up to 50 MPa with modified orderly pore distribution. A porous CBN wheel was fabricated with a total porosity around 30%. The grinding performance of the porous composite-bonded CBN wheel was evaluated in terms of specific force, specific grinding energy, and grinding temperature, which were better than those of the vitrified one under the same grinding conditions. Compared to the vitrified CBN wheel, clear straight cutting grooves and less chip adhesion are observed on the ground surface and there is also no extensive loading on the wheel surface after grinding.     

碳/环氧复合材料两次表面镜基板研制

文章介绍了碳/环氧复合材料两次表面镜基板的结构与铺层、选材与成型工艺,性能测试等内容。     

化学气相沉积/渗透技术综述

综述了化学气相沉积技术的最新发展，包括金属有机化合物化学气相沉积，等离子辅助化学气相沉积，激光化学气相沉积；同时介绍了三种用于制备工程材料的快速致密化化学气相渗透技术，包括强迫流动热梯度化学气相渗透，化学液相沉积，感应加热热梯度快速致密化技术。     

切削工具材料的发展综述

具体介绍切削工具材料如高速钢、硬质合金、陶瓷、金属陶瓷、刀具涂层技术、超硬材料的演变和进展。     

Radiative properties of alumina/aluminum particles and influence on radiative heat transfer in solid rocket motor

The thermal radiation of micron-sized condensed phase particles plays a dominant role during the heat transfer process in aluminized Solid Rocket Motors（SRMs）. Open research mainly focuses on the radiative properties of alumina particles while the study considering the presence of aluminum is lacking. In addition, the thermal radiation inside the SRM with consideration of the participating particles is seldom studied. In this work, the multiscale method of predicting the thermal environment insi...     

KrF激光照射约束层靶驱动产生高速飞片研究

微小空间碎片的超高速撞击对航天器性能有重要影响。为了研究撞击损伤机制,在"天光一号"装置上开展了Kr F准分子激光照射约束层靶产生高速飞片的实验研究,利用成像速度干涉仪(Imaging-VISAR)对飞片自由面速度进行诊断。采用1.9 J准分子激光将10μm的Al飞片加速至12 km/s,且整个过程为准等熵加载。研究结果表明准等熵加载下激光能量转化为飞片动能的效率(达39.4%)比冲击加载要高得多,飞片速度也高于后者。     

压电悬臂梁振动能量收集仿真与试验验证

基于压电陶瓷的振动能量收集器以其结构简单、清洁环保及易于微型化等诸多优点受到广泛关注。利用压电陶瓷的正压电效应,根据机电理论和结构动力学理论,采用模态法建立了压电悬臂梁的双向耦合分布参数模型,仿真分析了外激励频率和外接负载对压电能量收集器输出电压特性的影响,设计制作了铝制悬臂梁,并进行了地面振动和能量收集试验,试验结果与理论仿真吻合较好,验证了理论建模的正确性。试验结果表明,单个压电片的能量收集电压最大为73 V/N。     

单向陶瓷基复合材料阻尼计算方法

根据陶瓷基复合材料界面脱黏区及黏结区纤维和基体的应力分布,分析了拉伸和卸载时纤维相对基体的滑移机制,发展了单向陶瓷基复合材料阻尼的计算方法,并进行了数值分析.结果表明:①陶瓷基复合材料本身固有黏弹性阻尼很小,材料发生基体开裂后,界面滑移而引起的摩擦耗散成为材料主要的阻尼机制;②减小界面剪应力或减小纤维体积含量可以改善材料的阻尼性能;③材料阻尼随裂纹间距的增大而减小.