一种对转涡轮性能基本分析

借鉴Stewart关于对转涡轮的效率分析方法,从速度三角形基本分析入手,以速功比为主要变量,通过与一级高压一级无导叶低压涡轮对转涡轮的比较,考察一级高压两级低压第一级无导叶对转涡轮性能特点。研究表明:各转速比下,后者对转涡轮高效率对应的总速功比范围都比前者对转涡轮窄,但其高效区发生在更小的总速功比区域;随转速比绝对值增加,两种涡轮高效率区都增加,且其位置均偏向更大的总速功比区域;相比于前者对转涡轮,后者对转涡轮具有较低出功比,且偏向于低速功比区域;随转速比绝对值增加,两种对转涡轮出功比范围均拓展。     

免疫反馈算法及其在航空发动机控制中的应用

基于生物免疫系统的反馈机理,针对现有免疫反馈算法在系统超调后性能恶化的不足,提出了一种新型的免疫反馈算法。该算法考虑了系统超调后的免疫响应过程,补充给出了系统超调初期、中期及后期的免疫规则。仿真结果表明,基于新型免疫规则的PID控制器超调更小、响应更快,抗干扰能力强,十分适用于大惯性对象和超调量大的系统。     

AEG评审在型号合格审定中的研究与应用

概述了申请人的航空器评审工作,并简要对比分析了运行符合性清单、型别等级和训练要求、MMEL、MRBR、OCAI等11个AEG工作评审项目。同时通过对比分析航空器评审组(简称AEG)评审与型号合格审定之间的区别和联系,为申请人顺利开展AEG工作提出4条建议。     

飞机钣金零件展开计算方法的研究和应用现状

分析了飞机钣金零件展开的复杂性,按照飞机钣金零件的结构和成形分类,对钣金零件展开计算方法进行了综述和归类,在此基础上提出了典型飞机钣金零件数字化展开计算方法的解决思路。     

基于LMI的不确定线性系统观测器设计

研究了不确定线性系统的观测器设计问题。利用凸优化理论将基于线性矩阵不等８式（ ＬＭＩ）的观测器设计转换为鲁棒控制器设计,给出了标准的ＬＭＩ形式。采用该方法的设计过程只需求解三个线性矩阵不等式就可得到鲁棒控制器。在航空发动机控制应用中表明,基于ＬＭＩ的观测器对于具有干扰的系统仍然能保持系统稳定,数值仿真表明控制效果优于文献「１」的结果。     

Effect of scavenge port angles on flow distribution and performance of swirl-loop scavenging in 2-stroke aircraft diesel engine

Swirl-Loop Scavenging (SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. The arrangement of scavenge port angles greatly influences in-cylinder flow distribution and swirl intensity, as well as the performance of the SLS engine. However, the mechanism of the effect and visualization experiment are rarely mentioned in the literature. To further investigate the SLS, Particle Image Velocimetry (PIV) experiment and Computational Fluid Dynamics (CFD) simulation are adopted to obtain its swirl distribution characteristics, and the effect of port angles on scavenging performance is discussed based on engine fired cycle simulation. The results illustrate that Reynolds Stress Turbulence model is accurate enough for in-cylinder flow simulation. Tangential and axial velocity distribution of the flow, as well as the scavenging performance, are mainly determined by geometric scavenge port angles α_geom and β_geom. For reinforcement of scavenging on cross-sections and meridian planes, α_geom value of 27° and β_geom value of 60° are preferred, under which the scavenging efficiency reaches as high as 73.7%. Excessive swirl intensity has a negative effect on SLS performance, which should be controlled to a proper extent.     

Exploring mission planning method for a team of carrier aircraft launching

High-level efficiency and safety are of great significance for improving the fighting capability of an aircraft carrier. One way to enhance efficiency and safety level is to organize the carrier aircraft into combat effectively. This paper studies the mission planning problem for a team of carrier aircraft launching, and a novel distributed mission planning architecture is proposed. The architecture is hierarchical and is comprised of four levels, namely, the input level, the coordination level,the path planning level and the execution level. Realistic constraints in each level of the distributed architecture, such as the vortex flow effect, the crowd effect and the motion of aircraft, are considered in the model. To solve this problem, a distributed path planning algorithm based on the asynchronous planning strategy is developed. The proposed Mission Planning Approach for Carrier Aircraft Launching(MPACAL) is validated using the setups of the Nimitz-class aircraft carrier.Compared to the isolated planning architecture and the centralized planning architecture, the proposed distributed planning architecture has advantages in coordinating the launch tasks not only belonging to the same catapult but also when all different catapults are considered. The proposed MPACAL provides a modeling method for the flight deck operation on aircraft carrier.     

舰载飞机逃逸复飞动力学特性研究

采用相关作用力方法，建立了考虑起落架变形运动影响下飞机在运动斜甲板上的着舰滑跑运动方程，综合研究了海浪，风，地效，航母摇荡运动和起落架伸缩运动等因素对飞机着舰脱挂后逃逸复飞特性的影响，为舰载飞机逃逸飞行特性提供了计算方法。     

飞机制造互换协调综合技术工作法

通过分析论证指出，由５种基本的互换协调方法的相互渗透、交叉融合演变成动态的综合技术工作法，是飞机制造互换协调技术发展的必然趋势，并展望了该工作法的发展前景。     

航空用燃料电池及混合电推进系统发展综述

随着世界范围内碳减排需求的日益增长及长航时飞机的发展需要,高效率的燃料电池航空电推进系统逐渐受到重视,氢能航空的理念被人们所熟知。可使用碳氢燃料的高温燃料电池还可与燃气涡轮组成混合动力系统,发电效率进一步提高至70%。本文首先回顾了燃料电池及燃料电池涡轮混合系统在航空能源、动力系统方向应用概况;接着,概述了几种突破现有涡轮发动机技术瓶颈的新概念混合电推进系统,如发电与推进一体化燃料电池涡轮混合动力系统和无涡轮燃料电池混合推进系统;基于此,本文分析了限制燃料电池混合系统实际应用的关键技术难题,主要体现在混合动力系统功重比较低、大分子碳氢燃料重整技术未突破两方面。