叶轮机械颤振稳定性的工程预测方法

通过求解雷诺平均N-S方程并采用影响系数法,对三个基本正交模态的三维振荡涡轮叶片绕流问题进行了研究。结果表明数值模拟所得非定常气动力与实验吻合较好;基于刚体运动假设和模态叠加法,得到了可用于叶轮机械设计阶段颤振稳定性评估的稳定性参数图/气动阻尼图,即所有可能的刚体运动及其相应气动阻尼的关系图;通过对稳定性参数图/气动阻尼图的分析表明,在一定情况下振型对颤振稳定性有重要影响,应将其作为颤振稳定性设计的重要参数之一。     

火箭发动机超声速过膨胀射流气动噪声特性研究

采用大涡模拟LES方法计算了火箭发动机超声速过膨胀射流形态及近场声压分布,研究了入口温度与环境温度的比值(温度比)对声场的影响;将声源分解,基于Ffowcs Williams-Hawkings (FW-H)方程获取了不同位置噪声源的远场噪声,并根据声压级频谱和湍流形态分析了超声速射流噪声的产生机理。研究表明,超声速过膨胀射流气动噪声由湍流混合噪声和宽频激波噪声组成,近场噪声源以马赫波形式向大方位角辐射中高频噪声,下游大尺度湍流向低方位角范围辐射低频噪声,声压级峰值频率随观测角度增大而升高;随温度比升高,马赫波辐射角度增大,噪声指向性发生改变。该研究可为运载火箭发动机地面试车或火箭发射段声学环境设计提供参考。     

高超声速飞行器气动热耗散、输运及转换技术研究进展

针对高超声速飞行器面临的严重气动热集中、累积和时变问题,从气动热耗散、输运和转换三个方面,分别论述了被动热耗散材料、结构和主动热耗散技术,基于高导热材料、热管和工质对流的热输运技术,以及再生转换和热电转换技术的研究现状及其在高超声速飞行器上的应用案例,提出了上述技术在面临高超声速气动热时存在的问题。最后,针对高超声速飞行器气动热耗散、输运和转换技术的发展趋势进行了展望。     

旋成体在无侧滑大攻角下的横向气动力特性

介绍具有尖锥头部细长旋成体（以下简称弹体）在无侧滑下横向气动力随攻角变化特性，其中包括尖锥头部顶角、旋成体长细比、初始滚转角、试验雷诺数诸参数对横向气动特性的影响。还介绍美国ＮＡＳＡ的一篇综合研究报告的部分结果。试验结果表明，在低亚音速下，弹体气动特性对上述诸参数反应极为敏感，有时呈现随机特性。头部加边条、减小长细比或在后体装尾翼，将有助于减弱横向气动力。采用弹体旋转飞行技术，虽然产生Ｍａｇｎｕｓ侧向力，但有效地克服了气动力的随机性。     

一种新型装备完好率计算模型的研究

装备完好率能反映装备质量状况和战备完好性,对装备的研制、使用、维修保障和作战具有非常重要的意义。本文对装备质量信息的表示与完好状况的判定进行了讨论,对装备完好率的计算模型进行了较深入的研究,并给出了计算实例。这些模型为装备完好率信息的处理提供了一种比较科学的方法,实践表明,这些新的模型较好地实现了装备完好率的计算。     

充气气囊减速方案的气动设计研究

减速是航天飞行器必须面对的问题。充气气囊减速方案利用柔性编织材料外加涂层方式构成气囊，利用气体发生器快速产生高压气体，集防热、减速和着陆减振功能于一体，重量轻、成本低、适用范围广、可靠性高。设计了满足减速需求的气囊外形，利用数值求解NS方程和工程计算方法进行了气动力的预测和比较分析，利用六自由度动力学模型与气动力的耦合计算，对减速效果进行了计算与分析，并对热环境、温度场、应力、热应力及变形进行了计算，还对分离不确定性进行了研究。地面引导性风洞试验和理论分析表明，充气气囊减速方案具有十分明确的减速效果和优点，可用于未来航天飞行器实现减速飞行目的的技术方案。     

一种低RCS无人飞行器外形的气动特性实验研究

根据气动布局的基本原理,结合低RCS要求,设计了一种鸭式布局、带边条的翼身融合无人飞行器外形,实验结果表明,该外形不仅具有低RCS特征,而且具有良好的气动特性,升阻比达到8左右。     

硅基材料烧蚀模型研究

对冲压发动机燃烧室所使用的硅基热防护材料，用以往的单纯因二氧化硅液态层被气动吹除减薄的模型进行烧蚀计算，计算结果和实际偏差很大。我们根据硅基热防护材料的实际特性，在原有的液态层模型的基础上，考虑了夹杂碳化层对熔融态硅基的补强作用，提出了既有液态层吹除也有化学反应烧蚀的新模型，即考虑了热解、熔融和碳化、气动吹除结合化学反应烧蚀的多因素过程。并根据硅基热防护材料的烧蚀特点，根据发动机模型的试验结果，初步总结出了液态层粘附力的经验公式。从物理概念上分析可以看出该模型基本符合实际情况；从多种工况计算结果可看出，新模型和经验公式是比较合理的。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.