热沉设计技术

在大型空间环境模拟器KM6中，热沉是该设备中的重要分系统之一。文章介绍了热沉的材料选择、结构布置、壁板形式、支撑结构及主要设计计算结果等。     

物质对X射线的吸收系数和散射系数的计算

介绍了物质对X射线的光电吸收系数和康普顿散射系数的计算方法。作为算例，在约1keV～1MeV的X射线能量范围内，计算了聚四氟乙烯、某双基推进剂和人体鲜骨对X射线的光电吸收系数和康普顿散射系数。     

Numerical exploration on the thermal invasion characteristics of two typical gap-cavity structures subjected to hypersonic airflow

In this paper, numerical investigation of hypersonic gas flow over two typical gap-cavity structures is carried out using all-speed preconditioned density-based solver. Such structures filled with porous seal in the gap are often present at the joint locations of control surfaces of the hypersonic vehicles. Single-domain approach is adopted to integrate the governing equations for both porous and fluid regions. The basic thermal invasion characteristic is first illustrated using the maze gap-cavity structure without sealing. Then, the influence of seal filling depth on the thermal invasion characteristic is investigated for the structure with sealing. Finally, a comparison of thermal invasion characteristics between maze and straight gap-cavity structures is performed to examine the influence of gap bending. Results show that the main source of hot airflow invading into the gap is from the millimeter scale gas layer within the boundary layer. And the invasion characteristic presents approximate stationary behavior. A primary vortex occurs in the gap adjacent to the leeward wall, which is ascribed to the impinging effect between the separate boundary flow and the windward wall. This effect is also the main driving force of thermal invasion. A treatment of filling the seal in certain depth inside the gap can significantly reduce the thermal load of seal and maintain an acceptable level of the invading mass flow rate. Additionally, it is found that the gap bending exerts a limited block effect on the thermal invasion without sealing, and this effect can be ignored with sealing. These results can provide a reference for optimizing the seal gap-cavity structure configuration.     

温度传感器时间常数测试技术发展现状与分析

总结了近年来温度传感器时间常数测试技术的发展现状，包括各种测试方法的工作原理、系统结构及研究成果。根据热源及测试装置的特点对现有测试方法进行了分类，并进行了不同测试方法的对比分析，指出了不同测试方法的优点和适用性。基于当前温度传感器微纳化和高速响应的发展趋势，结合行业发展需求，提出了温度传感器高速动态响应测试技术研究应注意的问题和发展方向。     

Effects of cold fronts on MODIS-derived sensible and latent heat fluxes in Itumbiara reservoir (Central Brazil)

In this work we investigate the cold front passage effects on sensible and latent heat flux in a tropical hydroelectric reservoir. The study area, Itumbiara reservoir (Goiás State/Brazil) at the beginning of the austral winter, is characterized by the presence of a weak thermal stratification and the passage of several cold fronts from higher latitudes of South America. Sensible and latent heat fluxes were estimated considering the atmospheric boundary layer stability. In situ and MODIS water surface temperature data were used to adjust the coefficients for momentum and heat exchanges between water and atmosphere and spatialize the sensible and latent heat fluxes. The results showed that during a cold front event the sensible heat flux can be up to five times greater than the flux observed before. The latent heat flux tends to decrease during the cold front but increase again after the passage. The highest values of heat loss were observed at littoral zone and some Reservoir’s embayment. The heat loss intensification can be separated in two moments: first, during the cold front passage, when the wind speed increases and the air temperature decreases; second, after the cold front passage, with air humidity decreasing. This can be considered a key process to understanding the heat loss in the Itumbiara reservoir.     

转子叶片径向受限的“冲击-气膜出流”冷却结构流动与换热

为揭示转子叶片径向受限的"冲击-气膜出流"冷却结构流动换热规律,以某型双层壁叶片肋化分割形成的冷却单元为研究对象,通过数值模拟的方式,对冲击雷诺数Rej,旋转数Ro,无因次温比(Tw-Tf)/Tw等参数变化下流场和换热特性变化规律展开研究。结果表明:在哥氏力和离心力作用下,受限空间内存在射流偏转、径向二次流动以及二次冲击等现象;流动的径向受限可抑制射流偏转,强化冲击换热;相同的旋转数Ro下,逆转向冲击(叶背区)换热努赛尔数Nu比顺转向冲击(叶盆区)高8%。在研究的参数范围内,数值模拟和试验结果说明径向受限周向出流结构能有效的抑制旋转对换热的削弱。     

一种基于空芯光子晶体光纤的气体检测装置研究

光谱分析技术在大气污染检测领域具有广泛的应用前景。文章从吸收光谱的测量原理出发,提出一种基于空芯光子晶体光纤的气体检测装置实验方案,通过对不同浓度的甲醇和三氯乙烯样品进行测量,并根据3标准对测量结果进行分析,发现系统对甲醇和三氯乙烯的检测灵敏度可以达到ppmv量级。     

Nb-Si 基超高温合金的研究进展

Nb-Si基超高温合金由于熔点高、密度低和优良的高温强度等特点受到广泛关注,极具作为下一代高推重比航空发动机和超然冲压发动机的热端部件用材料的潜力.本文主要介绍了国内外在合金化、粉末冶金、定向凝固和热处理工艺对Nb-Si基合金组织和性能影响等方面的研究现状,并展望了其发展趋势.     

Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition

 Laser melting deposition was carried out to deposit a 1Cr12Ni2WMoVNb steel bar on a wrought bar of same material. Room-temperature tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample were evaluated, and microstructure, fracture surface morphology, and hardness profile were analyzed by an optical microscope (OM), a scanning electron microscope (SEM), and a hardness tester. Results show that the hybrid fabricated 1Cr12Ni2WMoVNb steel sample consists of laser deposited zone, wrought substrate zone, and heat affected zone (HAZ) of the wrought substrate. The laser deposited zone has coarse columnar prior austenite grains and fine well-aligned dendritic structure, while the HAZ of the wrought substrate has equiaxed prior austenite grains which are notably finer than those in the wrought substrate zone. Besides, austenitic transformation mechanism of the HAZ of the wrought substrate is different from that of the laser deposited zone during the reheating period of the laser deposition, which determines the different prior austenite grain morphologies of the two zones. Microhardness values of both the laser deposited zone and the HAZ of the wrought substrate are higher than that of the wrought substrate zone. Tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample are comparable to those of the wrought bar, and fracture occurs in the wrought substrate zone during the tensile test.     

卫星空调隔间地面调温技术的应用与分析

介绍了卫星在进行地面调温时所采用的空调隔间调温方案．针对该设计方案，以有效载荷的温度水平作为判定地面调温过程的依据，并且根据密封舱内风扇的工作状态．分别对“风扇开”和“风扇关”两种情况下的地面调温过程进行了理论分析。通过理论分析，得出了有效载荷在调温过程中的温度变化规律，并给出了许多有用的定性结论。最后，在理论分析结论指导下对地面调温进行试验．试验数据与理论分析公式符合得较好。