智能型减压器试验台的研制

主要介绍了基于硬件设备和软件编程基础上的智能型减压器试验台的设计与应用。测试系统保留了最通常的手动操作系统，增加了全新的自动数据采集系统。试验台可精确、同步测量高入口压力值时的瞬时出口压力值，同时，增加了入口压力控制系统，大大提高了工作效率。     

A/D量化对GPS接收机自适应天线性能的影响

A／D量化会带来干扰抑制比和输出卫星信噪比的损耗。通过估算量化噪声和干扰信号互相关矩阵的最大特征值，给出了干扰抑制比的近似表达式，而输出卫星信噪比损耗则是通过计算高斯噪声下量化信号的一阶矩和二阶矩得到的。结果表明，当选择量化间隔△-0．5d(α^2为接收信道的热噪声功率)时，量化噪声近似为独立的均匀分布的白噪声，因A／D量化带来的输出卫星信噪比的损耗不大于0．1dB，干扰抑制能力几乎不受影响。计算机仿真实验也验证了所作分析。     

Gas permeability and flow characterization of simulated lunar regolith

Recent discoveries of water ice trapped within lunar topsoil (regolith) have placed a new emphasis on the recovery and utilization of water for future space exploration. Upon heating the lunar ice to sublimation, the resulting water vapor could theoretically transmit through the lunar regolith, to be captured on the surface. As the permeability of lunar regolith is essential to this process, this paper seeks to experimentally determine the permeability and flow characteristics of various gas species through simulated lunar regolith (SLR). Two different types of SLR were compacted and placed into the permeability setup to measure the flow-rate of transmitted gas through the sample. Darcy’s permeability constant was calculated for each sample and gas combination, and flow characteristics were determined from the results. The results show that Darcy’s permeability constant varies with SLR compaction density, and identified no major difference in permeable flow between the several tested gas species. Between the two tested SLR types, JSC-1A was shown to be more permeable than NU-LHT under similar conditions. In addition, a transition zone was identified in the flow when the gas pressure differential across the sample was less than ∼40 kPa.     

基于Linux的触摸屏设备驱动的设计

以三星公司的S3C2440A处理器为平台，介绍了linux操作系统下四线电阻触摸屏的驱动程序的设计开发过程，详细阐述了触摸屏设备驱动程序的设计过程，并将设计好的驱动程序注册到linux内核中。最后将触摸屏设备驱动程序加入到linux内核中编译成内核映像，并烧写到S3C2410A处理器中测试该驱动程序。     

T cell regulation in microgravity – The current knowledge from in vitro experiments conducted in space,parabolic flights and ground-based facilities

Dating back to the Apollo and Skylab missions, it has been reported that astronauts suffered from bacterial and viral infections during space flight or after returning to Earth. Blood analyses revealed strongly reduced capability of human lymphocytes to become active upon mitogenic stimulation. Since then, a large number of in vitro studies on human immune cells have been conducted in space, in parabolic flights, and in ground-based facilities. It became obvious that microgravity affects cell morphology and important cellular functions. Observed changes include cell proliferation, the cytoskeleton, signal transduction and gene expression. This review gives an overview of the current knowledge of T cell regulation under altered gravity conditions obtained by in vitro studies with special emphasis on the cell culture conditions used. We propose that future in vitro experiments should follow rigorous standardized cell culture conditions, which allows better comparison of the results obtained in different flight- and ground-based experiment platforms.     

飞机燃油系统地面模拟试验干扰的产生和处理

分析燃油地面模拟试验台测控系统在调试过程中模拟量输出信号出现大幅度波动的原因,介绍其处理过程及实际效果,指出在试验中应采取的措施。     

Upwards migration phenomenon on molten lunar regolith: New challenges and prospects for ISRU

As part of our research on the feasibility of producing commodities from lunar regolith by thermal-driven processes with minimal terrestrial precursors we need to characterize, reproduce, and understand thermophysical properties of the molten regolith still unforeseen under the lunar vacuum conditions at a scalable sample size. Two unanticipated phenomena, apparently caused by lunar melt’s surface tension under vacuum, have been revealed in our research work, vacuum void formation and upwards migration. In this paper we present our findings and thinkable explanation on the upwards migration phenomenon experimentally observed and consistently replicated as JSC-1A lunar regolith simulant melted at high vacuum. Upwards migration of molten lunar regolith will make future lunar ISRU’s melting processes both challenging as molten bulk material would migrate upwards along the container’s walls, and also promising on new opportunities for alternative ISRU’s sustainable processes as regolith’s upwards migration takes place in uniformed thin-film pattern. Among the potential ISRU’s processes that might use controlled thermal thin-film-based migration without the necessity of terrestrial precursors are production of feedstock for 3D printing, fractional separation of regolith’s component’s (O₂, metals, and alloys) via pyrolysis, film coating, purification of valuables solid crystals including silicon, and fabrication of key elements for microfluidic, and MEMS devices. Thermal upwards migration phenomenon on JSC-1A’s melt is formulated and explained by the authors as due to thermal Marangoni effect (also known as thermo-capillarity) in which temperature gradients within the melt’s bulk and along the crucible’s wall yield the surface tension large enough to supersede the gravitational force and yield the experimentally observed upwards thin-film migration. As far as the authors know, upwards thermal migration of molten JSC-1A (or other lunar simulant regolith) under vacuum has not been reported in the literature. A thermal mathematical model accounting for thermal Marangoni effect on molten JSC-1A agrees with what experimentally was observed, the formation of the meniscus on the melt-wall surface interface along with an incipient upwards migration in thin-film pattern along the crucible wall that, according to the model, experiences large temperature gradient, an important factor to trigger the thermal Marangoni effect along with the fact that surface tension of the molten lunar regolith material is temperature dependent.     

“实践九号”A卫星光学遥感图像杂散光噪声去除

杂散光是影响卫星光学遥感图像像质的重要因素,严重时会在图像上形成明暗的杂散光条纹噪声,降低图像的对比度和清晰度。文章针对“实践九号”A（SJ-9A）卫星光学遥感图像存在的杂散光噪声现象,设计了一种基于成像载荷焦面入射杂散光空间分布特征的遥感图像杂散光条纹噪声去除方法,通过测量杂散光在推扫遥感图像上的空间分布特征,建立杂散光分布特征模型,采用分块自适应算法进行杂散光噪声滤波,消除SJ-9A遥感图像上随时空变化的杂散光条纹噪声。杂散光噪声去除后图像整体色调均匀,无条带噪声,满足CCD/TDI-CCD推扫遥感图像辐射校正精度（广义噪声）优于5%的指标要求。     

Computations of unsteady transonic flow over airfoil at low Reynolds number

Transonic flow over a thin airfoil at low Reynolds number was studied numerically by directly solving two-dimensional full Navier-Stokes equations through 5th order weighted essentially non-oscillatory(WENO) scheme without using any turbulence model.A series of distinguished unsteady phenomena for a thin 2-D transonic airfoil flow were presented.Due to continuous adverse pressure gradient in the subsonic flow downstream of the sonic line, the unsteady separated boundary layer with main vortex and secondary vortex was developed at the rear of the airfoil.At the trailing edge,the vortex-shedding was characterized by periodical connection of the main vortex and secondary vortex on the other side of the airfoil.The unsteady separation and vortex-shedding occurred with the same period.On the airfoil surface,the average pulse pressure related to the unsteady supersonic region was obviously smaller than that related to the vortex-shedding at the trailing edge.With the attack angle increasing from 0° to 2°, the frequency of vortex-shedding decreases about 4.2%.At last, the turbulence intensity and many second-order statistics in the wake region were investigated.      

GPS伪随机码畸变的建模与分析

建立了全球卫星定位系统(GPS)卫星C/A码畸变数学模型,推导了畸变后的C/A码的相关函数,在Matlab软件中进行仿真。结果表明:该模型能合理解释SVN19卫星的测距码畸变故障,并可作为未来伪随机信号畸变的一个合理模型,为导航信号的完好性监测提供理论支持。