采用阵列天线的GPS接收机的多径抑制方法

提出一种新的用于阵列天线GPS接收机的多径抑制方法。考虑到通常GPS视线信号的来波方向与多径的来波方向不同,在每个导航数据符号位内测距（C/A）码重复,通过对阵列接收的信号矢量与它本身的延迟信号矢量互相关,提高接收机前端信噪比,再利用最大特征值法和前后向空间平滑技术准确地估计期望卫星视线信号（LOSS）的来波方向。最后综合多个GSC子阵列有效地降低了相关多径对码跟踪精度的影响。仿真结果显示,该方法能使接收机在与LOSS码同步前准确估计LOSS的角度信息,有效抑制相关多径,且鉴相结果准确。     

Observations of non-migrating tides and ionospheric perturbations of O(D) airglow by ISUAL instrument

In this paper, we present the spatial variations of O(¹D) airglow observed by the ISUAL (Imager of Sprites and Upper Atmospheric Lightning) instrument on board the FORMOSAT-2 satellite. With a CCD camera and a 630 nm filter, ISUAL can measure global atmospheric emissions lying between the heights of 80 and 300 km. In days of 3–6 September 2008 and 25–27 February 2009, ISUAL has measured the emissions of O(¹D) airglow with results showing strong longitudinal peak-3 and peak-4 structures. The Lomb-Scargle analyses for these two cases show periods of longitudes of 120° and 90° supporting the DE2 and DE3 non-migrating tides. The 630 nm emissions are enhanced in equatorial regions and are lying along the equator. Over Africa its intensity can sometimes increase up to 80% relative to other longitudes. The perturbation is so strong that non-migrating tides are erased. A case of bimodal distribution with strong emissions at latitudes in equator and mid-latitude in geographic coordinates was observed.     

The effect of spatial truncation error on variance of gravity anomalies derived from inversion of satellite orbital and gradiometric data

The spatial truncation error (STE) is a significant systematic error in the integral inversion of satellite gradiometric and orbital data to gravity anomalies at sea level. In order to reduce the effect of STE, a larger area than the desired one is considered in the inversion process, but the anomalies located in its central part are selected as the final results. The STE influences the variance of the results as well because the residual vector, which is contaminated with STE, is used for its estimation. The situation is even more complicated in variance component estimation because of its iterative nature. In this paper, we present a strategy to reduce the effect of STE on the a posteriori   variance factor and the variance components for inversion of satellite orbital and gradiometric data to gravity anomalies at sea level. The idea is to define two windowing matrices for reducing this error from the estimated residuals and anomalies. Our simulation studies over Fennoscandia show that the differences between the 0.5°×0.5°$0.5°\times 0.5°$ gravity anomalies obtained from orbital data and an existing gravity model have standard deviation (STD) and root mean squared error (RMSE) of 10.9 and 12.1 mGal, respectively, and those obtained from gradiometric data have 7.9 and 10.1 in the same units. In the case that they are combined using windowed variance components the STD and RMSE become 6.1 and 8.4 mGal. Also, the mean value of the estimated RMSE after using the windowed variances is in agreement with the RMSE of the differences between the estimated anomalies and those obtained from the gravity model.     

A320飞机在低速滑行中滑偏的处理

A320系列飞机在运行中有时会出现低速滑行时滑偏的现象,给航班的安全、正点运行带来了很大的压力.本文分析了引起滑偏的原因,给出针对此类故障的快速处理建议及排故方法,以期节省排除此类故障的时间,对缓解航班运行压力提供帮助.     

基于纹理的活动轮廓三维图像分割研究

对具高噪声和低对比度三维图像的识别和分割算法进行了研究。基于活动轮廓模型,用Gabor变换提取图像的纹理特征,根据统计学信息假设,通过偏微分方程水平集和窄带方法求解,获得较基本活动轮廓的算法分割更光滑精确的物体轮廓。实验结果表明:改进模型算法的效率和准确度达到预期效果。     

3D雷达对3D雷达的引导提示性能分析

分析了不同位置关系3D雷达对3D雷达的成功引导概率及引导误差,讨论了成功引导概率随参数特征变化的性质,仿真分析目标到提示雷达不同斜距时目标在被提示雷达中的角度分布及引导误差变化。研究对雷达组网中3D雷达对3D雷达引导提示系统设计有一定的参考价值。     

3D-Cf / Mg 复合材料的热残余应力研究

采用随动硬化有限元模型,研究了三维碳纤维增强镁基复合材料(3D-Cf/Mg)基体热残余应力的大小、分布以及不同工艺处理对热残余应力的影响。同时,对复合材料进行了高、低温处理,利用XRD定性分析了处理前后复合材料基体热残余应力的变化。计算结果表明:经过-196℃低温处理后,复合材料基体的平均Mises热残余应力由169.06 MPa减小至55.29 MPa;高温处理后,基体平均热残余应力几乎不变。该结果与实验结果吻合,证明了低温处理能明显降低复合材料基体的热残余应力。     

机身上壁板复合材料蒙皮数字化成型工艺

为解决树脂基复合材料复杂结构件工艺难以实现问题,采用三维工艺模型设计、铺层工艺仿真、铺层样片排版与数控下料、激光投影铺层定位等数字化技术,不但从根本上改变了传统的复合材料构件生产方式,解决了工艺技术难题,而且在缩短研制周期、提高产品质量,降低研制成本等方面都取得了显著的应用效果。     

旋翼跨音速非定常黏性绕流的高效CFD模拟方法

为提高旋翼跨音速黏性绕流CFD模拟的效率,建立了一套基于隐式LU-SGS算法和OpenMP并行策略的旋翼非定常流场高效数值求解方法。首先,基于二维剖面翼型的Poisson方程求解和网格插值、翻折方法生成绕桨叶的O-C-O型贴体正交网格,并采用高效的"扰动衍射"(Disturbance diffraction method,DDM)挖洞方法、并行化″Inverse map″(IM)的贡献单元搜索方法,构建了旋翼运动嵌套网格系统。在此基础上,以耦合S-A湍流模型的非定常RANS方程为主控方程,对流通量采用高精度的Roe-MUSCL格式进行离散,时间推进采用隐式LU-SGS双时间方法,同时采用OpenMP并行策略加速旋翼流场求解。最后,运用所建立的方法分别对悬停ONERA 7A旋翼、前飞Caradonna-Tung(C-T)旋翼无升力状态及SA349/2旋翼有升力状态的气动特性及涡尾迹特征进行了模拟,通过与试验值对比验证了文中方法在旋翼非定常流场CFD模拟中的有效性和高效性。     

新型非接触式径向C4D传感器优化设计

基于电容耦合式非接触电导检测(C4D)技术,设计研发了一种新型径向结构的非接触式电导测量传感器。该传感器利用串联谐振的原理,引入电感模块以消除耦合电容对测量的不利影响,扩大了测量范围,提高了测量灵敏度。同时,用仿真与实验相结合的方法对传感器的电极张角进行了优化研究。在5.0、7.5、9.1、10.2和12.0 mm 5种不同内径的管道中进行了电导测量实验,电导测量相对误差均不超过5%,实验结果表明,所设计的新型非接触式径向C~4D电导测量传感器是可行和有效的。