微型导弹蒙特卡洛打靶仿真研究

导弹在实际作战飞行中,由于环境因素和系统误差的影响,其姿态和弹道的参数与理想弹道的参数存在偏差.对一种微型导弹在飞行中受到的多种随机干扰因素进行分析,给出了各种干扰因素的处理方法,建立了导弹六自由度弹道蒙特卡洛打靶仿真模型.通过蒙特卡洛计算机打靶仿真,对导弹的命中精度进行研究,验证了仿真模型的准确性和仿真方法的有效性.     

Modelling and design of wing tip devices at various flight conditions using a databased aerodynamic prediction tool

A design study of wing tip devices at high and low speeds is described. The basis of the design study is an equivalent drag approach containing both aerodynamic drag gain and structural weight penalty. A comprehensive parameter study is carried out using a rapid aerodynamic prediction tool named Lift and Drag Component Analysis (LIDCA). Adding to an available lifting-line method a databased module for airfoil data is employed that uses results of two-dimensional flow simulations by multidimensional interpolation. Detailed validation studies of the method at high lift and high speed have demonstrated good accuracy. RANS computations of the selected wing tip designs confirm the predicted benefits at cruise condition. The results of the most effective wing tip designs are analysed at both flight conditions. Finally, options for improving the performance at take-off are suggested.     

Depeaking – economic optimization of air traffic systems

More than half of all flights in and out of Frankfurt International Airport are conducted by Lufthansa airlines, as it is one of their two major hubs. The so called hub and spokes systems allow airlines to bundle major passenger flows via connecting flights across the in- and outbound traffic. The reliability of these transfer connections, and specifically the arrival punctuality at the hub airports are crucial to the economics of the daily operation.Since Frankfurt International Airport has lately been one of the most congested airports in Europe, delays (in particular arrival delays) have increased quite significantly throughout the last years. To compensate for additional queueing time in the arrival processes, the scheduled block times inbound Frankfurt were continuously adjusted upwardly keeping the arrival punctuality (and thereby the connection reliability) close to stable. The two disadvantages of this approach have been the decrease in aircraft productivity and over-deliveries in peak hours, which in turn induce either additional block time delay or ground delay programs inbound Frankfurt.This paper introduces an iterative stochastic-simulation approach that models the vicious circle of lengthening block times and increased over-deliveries. In a second step it quantifies the operational and economical effects of depeaking the schedule and illustrates the overall growth potentials for the depeaked operation of the airport. The schedule was successfully implemented in Frankfurt in summer 2004.     

六自由度电动平台电动缸附加运动误差量化分析

六自由度电动平台通过六个电动缸的协调伸缩和旋转运动,结合上下铰链的两自由度转动,实现上平台在三维空间的六自由度运动.由于电动缸通过螺旋副实现缸杆的直线运动,其直线运动与旋转运动之间存在螺旋关系,因此缸杆相对于缸筒的被动转动会引起缸杆的附加直线运动,从而对六自由度电动平台的位姿精度产生影响.针对六自由度电动平台进行了运动学分析.在此基础上进一步计算了电动缸在平台运动过程中产生的被动螺旋附加运动,并对该运动引起的误差进行了量化分析.仿真结果表明,在六自由度电动平台运动过程中产生的被动螺旋附加运动误差达到毫米数量级,将会对平台的位姿精度产生显著影响.对于高精度运动平台来说,必须研究补偿算法对其进行补偿.     

Impact of emissions from anthropogenic sources on satellite-derived reflectance

The present study deals with the impact of extensive anthropogenic activities associated with festivities and agricultural crop residues burning in the Indo-Gangetic Plains (IGP) on satellite-derived reflectance during November 2007. Intense smoke plumes were observed in the IRS-P4 OCM satellite data over IGP associated with agricultural crop residue burning during the study period. Terra-MODIS AOD and CALIPSO LIDAR backscatter datasets were analysed over the region to understand the spatial and temporal variation of the aerosol properties. Ground-based measurements on aerosol optical properties and black carbon (BC) mass concentration were carried out during 7–14 November 2007 over urban region of Hyderabad, India. Top of the Atmosphere (TOA) reflectance estimated from IRS-P4 Ocean Color Monitor (OCM) data showed large variations due to anthropogenic activities associated with crop residue burning and fireworks. Atmospheric corrections to OCM satellite data using 6S radiative transfer code with inputs from ground and satellite measurements could account for the variations due to differential aerosol loading. Results are discussed in this paper.     

大型深空测控天线副反射面控制技术

针对大口径、高频段深空测控天线主/副反射面变形引起的天线电性能下降问题,采用副反射面控制技术实现天线的电性能补偿。首先,在分析并联机构数学模型的基础上,结合并联机构坐标系定义,给出六自由度并联机构位姿的正、逆解;其次,根据变形后天线形状采用抛物面拟合法给出副反射面位姿与仰角的关系,这样在天线实时运动过程中,可根据仰角查找出副反射面位姿最佳工作点;最后通过六自由度并联机构正、逆解及控制算法控制副反射面到最佳位置和姿态上。理论分析和工程实践表明,副反射面控制技术通过控制副反射面中心到最佳焦点位姿上,可实现对天线电性能的有效补偿。六自由度并联机构控制具有自身承载力强,位置、姿态控制灵活等特点,适合于大型天线副反射面实时精密控制。     

镍基单晶冷却叶片高温持久性的理论与试验研究

采用含有0~4排气膜孔的薄壁平板试样模拟镍基单晶冷却叶片,研究了气膜孔排布对镍基单晶冷却叶片高温持久性的影响,并基于晶体塑性理论建立单晶材料蠕变数值计算模型,将其编入Abaqus用户子程序中,对不同气膜孔排布的薄壁平板试件进行有限元分析。试验结果表明,在气膜孔数相同的情况下,随着气膜孔排数的逐渐增多,冷却叶片高温持久寿命不断降低,且下降趋势逐渐加剧。文中提出了基于有限元数据的高温持久寿命预测幂函数模型,在对应孔排布、应力、温度条件下,其相对误差均小于3%,有限元分析得到的应力场分布结果与试样的断口形貌相吻合。     

高性能钛合金粉末冶金技术研究

采用热等静压预合金粉工艺对Ti-6Al-4V钛合金粉末冶金技术进行了研究，同时就原料粉状态对粉末钛合金性能的影响进行了初步研究，并进行了近净形成型工艺试验。结果表明，采用预合金粉工艺制备的Ti-6Al-4V粉末钛合金材料性能良好，且可实现近净形成型；这说明预合金粉工艺在制备高性能、低成本钛合金部件方面有良好的应用前景。     

可变弯尾飞行器空间螺旋机动的实现

可变弯尾飞行器具有气动控制独特、机动范围可调等特点,是高超声速飞行器实现机动飞行的有效途径。可变弯尾飞行器不仅可以实现射面内的拉起和下压机动,还可以利用入轨时起旋与尾部的上下摆动实现空间的螺旋机动,并且可以在不起旋时利用可变的弯尾部分进行绕球铰的空间转动使飞行器产生空间螺旋运动。通过气动力工程预测方法与飞行器六自由度弹道的耦合计算,研究了此类飞行器在再入过程中的螺旋运动、稳定性及飞行特性。     

Ti-6Al-4V合金氢致塑性效应与应用

利用光学显微镜研究了置氢处理后Ti-6A1-4V合金的微观组织,通过X射线衍射分析试验研究了置氢处理过程中的相转变过程;采用室温压缩试验研究了置氢处理后Ti-6Al-4V合金的变形行为,并进行了冷镦试验.结果表明,氢促进了α"马氏体与亚稳β相的形成,亚稳β相的形成与转变是Ti-6Al-4V合金变形性能提高的主要因素;在...