飞机座舱有机玻璃钻（扩）孔工艺的研究

 以自然冷却无需使用压缩空气和冷却剂的一次钻（扩）孔,作为飞机座舱玻璃孔的工艺。孔的质量优于现行工艺的成品孔。钻（扩）孔后无需退火以消除加工应力。该工艺适用于定向和不定向有机玻璃,粘涤纶钢的有机玻璃组合件。     

CVD-Si3N4陶瓷及其复合材料氧化行为研究进展

概述了CVD—Si3N4陶瓷及其复合材料在干燥氧气下的氧化行为。Si3N4陶瓷在高温下氧化时，除生成SiO2保护膜外，还生成一薄层比SiO2膜更优异的氧气扩散阻挡层(Si—O—N化合物层)，该层具有优异的抗氧化性能。介绍了两种氧化机制模型，同时分析了温度、杂质等对CVD—Si3N4陶瓷氧化行为的影响。     

应用ART1神经网络仿真车间分组

阐述了ART1神经网络在制造单元设计过程中形成零件族的基本方法,并在基于MATLAB的软件平台上,利用其神经网络工具箱对生产过程中的实际情况进行了仿真和应用。     

Expectations for Infrared Spectroscopy of 9P/Tempel 1 from Deep Impact

The science payload on the Deep Impact mission includes a 1.05–4.8 μm infrared spectrometer with a spectral resolution ranging from R∼200–900. The Deep Impact IR spectrometer was designed to optimize, within engineering and cost constraints, observations of the dust, gas, and nucleus of 9P/Tempel 1. The wavelength range includes absorption and emission features from ices, silicates, organics, and many gases that are known to be, or anticipated to be, present on comets. The expected data will provide measurements at previously unseen spatial resolution before, during, and after our cratering experiment at the comet 9P/Tempel 1. This article explores the unique aspects of the Deep Impact IR spectrometer experiment, presents a range of expectations for spectral data of 9P/Tempel 1, and summarizes the specific science objectives at each phase of the mission.     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

应用声发射技术实时监测某型机防扭支架疲劳试验裂纹

随着声发射技术的发展,声发射技术在工程无损检测上的运用日益广泛。本文对声发射技术的应用现状、基本理论及在直升机某型机防扭支架疲劳试验裂纹监测中的应用进行了介绍。希望通过应用声发射技术,能及时捕捉疲劳裂纹形成和扩展的过程,给判定疲劳试验件是否破坏带来更准确、客观的依据,从而能为直升机动部件和结构件的准确定寿提供一种科学的辅助手段。     

高职高专土建类专业创新教学模式的探讨

针对高职高专教改中存在的问题，从能力培养要求，教学体系的改革，实践教学的改革，创新能力的培养等方面进行论述，提出构建模块化实践教学体系，加强专业实践教学改革的思路及可操作性的建议。     

利用改正数信息的北斗三号实时精密单点定位及性能分析

北斗三号全球卫星导航系统已正式建成并开通服务。为了利用实时改正数信息系统地揭示北斗三号精密单点定位性能，并为用户提供理论依据和应用参考，首先解算了卫星实时精密轨道、钟差及其改正数，分析了其精度。然后基于实时改正数信息，利用监测站广播星历和观测数据，分别进行了双频静态、双频仿动态、单频静态和单频仿动态仿实时精密单点定位，以评估其性能。结果表明：北斗三号MEO卫星实时轨道和钟差精度均值分别约为12cm和0.2ns，满足实时精密单点定位需求。静态实时精密单点定位精度优于动态，双频优于单频，均可达到分米级。对于定位收敛时间，双频静态最短，约为40min；双频动态和单频静态均约为85min；单频动态最长，约为120min。     

"三工问题"与和谐城市的构建

我国国有企业,特别是大型国有企业的改制不到位,改革深层次矛盾日益突出,政治、社会领域的改革滞后以及法制不健全、监督机制不灵等原因直接导致我国城市中出现“三工问题”。“三工问题”是指由于工人下岗、工厂改制、工业调整所带来的经济社会问题,主要包括工人失业、权力腐败、分配不公、国有资产流失和被侵吞、群体事件、失地农民的安置等诸多经济社会问题,解决好这些问题直接关系到社会稳定和和谐城市的构建。现阶段应主要从完善社会保障、发展职业培训、健全权力制衡、调节收入分配、强化社会监督、化解社会矛盾、整顿工业园区、安置失地农民八个方面入手解决城市“三工问题”。     

基于数字滤波的B-样条插值法在图像旋转中的应用

提出一种基于无限脉冲响应和有限脉冲响应数字滤波技术的快速 B-样条插值法 ,并将其应用于实时图像旋转处理中。为了优化旋转后的图像质量 ,本文采用 3次 B-样条对图像旋转后的像素点灰度值进行插值运算。另外 ,通过对传统图像旋转矩阵的分解 ,将图像在二维空间中的旋转运算分解成为三步在一维空间内平移运算 ,使插值运算在一维空间中完成 ,从而简化了图像旋转数据处理中的插值运算。最后 ,还提出了一种以硬件方法完成高阶图像插值运算实现图像旋转的新方法 ,并针对 2 5 6灰度级 ,2 5 6× 2 5 6像素的图像 ,设计出一个以 FPGA为核心的实时、高质量的硬件图像旋转系统。