New multifrequency measurements of the spectrum of the cosmic background radiation

New measurements of the Cosmic Background Radiation temperature at 12 cm, 6.3 cm, 3 cm, 0.9 cm and 0.3 cm have made in July 1982 from the White Mountain High Altitude Research Station. The results are presented and the existence of spectral distortions discussed.     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.     

外翼上壁板根部连接形式对飞机承载能力的影响研究

在飞机结构设计中,外翼上壁板根部连接处结构形式对飞机的传力、变形、承载能力具有重要影响.通过对3种不同形式的上壁板根部连接方案进行压缩试验,研究各方案的承载能力、破坏方式.通过三维有限元方法,计算了连接部位的主要螺钉所分配的载荷,研究了长桁根部斜角对结构屈服载荷的影响,得到了最优的选型方案.     

硅氮烷环体的催化聚合及热解制备Si3 N4 材料

采用甲基氢二氯硅烷的氨解产物硅氮烷环体(MHSZ)为原料,以四丁基氟化铵为催化剂,制备了高分子量的硅氮烷聚合物(PHSZ),结合红外、核磁、凝胶色谱仪和热重分析了反应时间对合成的PHSZ结构、组成、分子量和陶瓷产率的影响。考察了低温氨气,高温N2气氛处理工艺对热解产物结构和组成的影响。结果表明,随着反应时间的延长,PHSZ高聚物的分子量提高,热失重降低;采用该热解方式PHSZ可转化为含碳量仅为0.5wt%的Si3N4材料,热解样品在1 600℃时完全结晶,晶相主要是α-Si3N4。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

靶场试验雷达组网信息系统设计

针对靶场试验跨区域雷达联合参试的特点,结合靶场试验信息实时处理显示需求,分析和比较了高层体系 结构(HLA)和试验训练使能体系结构(TENA)的原理和技术优势,设计了适用于靶场试验的雷达组网信息系统总 体框架,阐述了该系统的组成和功能,为提高靶场综合试验能力做出了探索。     

MSG-3在民用航空器维修大纲制定中的应用

国内民用航空器的研发起步较晚,目前投入运行的国产航空器型号种类和数量都不多,航空器制造厂家在制定维修大纲方面的经验较少.本文对国际上通行的MSG-3维修任务分析方法进行研究,首先介绍MSG-3维修任务分析方法产生和发展的历史背景,以及其在国内民机型号中的应用;然后详细叙述MSG-3维修任务分析方法(包括航空器系统、动力装置维修任务的分析方法,结构检查和区域检查任务的分析方法,以及形成维修大纲的流程和维修任务的后期优化);最后通过对航空器型号的审查经验,总结我国民用航空器制造厂家在制定航空器维修大纲时存在的问题和改进方向.     

基于计划到达时刻的四维航迹规划

为了加速空管自动化与智能化技术的应用与实施,提出了水平航迹与高度/速度剖面分阶段设计的四维航迹规划方法。基于动态时间规整与层次聚类方法实现历史雷达航迹聚类分析,完成水平航迹设计。建立速度剖面规划模型,通过航迹生成器与速度调整器交互协作,精细化控制进场时间,以满足计划到达时间要求。以上海浦东国际机场PINOT进场航班为例实施验证,结果表明,四维航迹规划方法可有效实现航班的计划到达时间,从而减少航班延误,提高终端空域运行效率。     

基于模型的系统工程概述

由于航空领域涉及的系统日益高度复杂,为更好推进基于模型的系统工程(Model Based System Engineering,MBSE)研发体系,通过从当前遇到的问题、推行基于模型的系统工程的必要性、优势、未来的挑战等方面进行了较为详细地阐述.基于模型的系统工程研发体系具有知识表示的无二义、系统设计的一体化、沟通交流的高效率等优势,是未来发展的大趋势.