New He neutron monitor for Chilean Cosmic-Ray Observatories from the Altiplanic zone to the Antarctic zone

We present the results of three years of continuous operations and the principal characteristics of our new ³He neutron monitors installed in the Chilean Network of Cosmic-Ray Observatories. During the years 2004 and 2005, we began the construction of this International Geophysical Year (IGY)-type ³He neutron monitor, with the intention of replacing the older proportional tubes of the BF₃. These new monitors are installed in stations at locations ranging from the near-equatorial zone to the Antarctic zone. As a reference system, we used our own BF₃ neutron monitors and previously complemented the collected data with a Monte Carlo simulation for the proton-yield function response of the Putre neutron monitor. Herein, we present for the first time the data obtained from our new high-mountain observatory located in the Altiplanic zone.     

3D information from 2D images recorded in the European Modular Cultivation System on the ISS

The European Modular Cultivation System (EMCS) on the ISS allows long-term biological experiments, e.g. on plants. Video cameras provide near real-time 2D images from these experiments. A method to obtain 3D coordinates and stereoscopic images from these 2D images has been developed and is described in this paper. The procedure was developed to enhance the data output of the MULTIGEN-1 experiment in 2007. One of the main objectives of the experiment was to study growth movements of the Arabidopsis plants and the effect of gravity on these. 3D data were important during parts of the experiment and the paper presents the method developed to acquire 3D data, the accuracy of the data, limitations to the technique and ways to improve the accuracy. Sequences of 3D data obtained from the MULTIGEN-1 experiment are used to illustrate the potential of this newfound capability of the EMCS. In the experiment setup, a positional depth accuracy of about ±0.4 mm for relative object distances and an absolute depth accuracy of about ±1.4 mm for time dependent phenomena was reached. The ability to both view biological specimens in 3D as well as obtaining quantitative 3D data added greatly to the scientific output of the MULTIGEN-1 experiment. The uses of the technique to other researchers and their experiments are discussed.     

A preliminary Chandra X-ray spectroscopy of the supernova remnant N132D

We present the preliminary results of a Chandra X-ray study of N132D, a young shell-like supernova remnant (SNR) in the Large Magellanic Cloud. The equivalent width maps of emissions from O, Ne, Mg, Si, and S are provided. Spatially resolved spectral analysis for the small-scale regions were tentatively performed. X-ray spectra of the interior can be described with a single-thermal model. The faint interior regions have lower density, higher temperature above 1 keV than that of bright interior regions. The X-ray spectra along the shell can be phenomenally fitted with either a double-vpshock model or a vpshock + powerlaw model. If the non-thermal component is true, N132D would be listed as another X-ray synchrotron SNR.     

基于体绘制的真三维显示中体素路径优化算法分析

由于基于体素的绘制方法所需处理体素数据很大,而体素激活的随机顺序与体数据存储顺序不一致,因此需要在体素激活前对体素按照立体显示的要求进行路径优化.本文针对该问题描述和分析了体素化过程,并提出一个典型的体素化流程.在此基础上,重点分析了流程中的体素路径优化算法,对其进行分析后进行数学建模并转化为TSP问题,最后提出了一个...     

三维工序模型的演进式构建方法

为实现以三维工序模型为核心的三维工艺构建,基于从毛坯模型到最终产品模型的演进过程,对三维工序模型的生成方法进行研究.在制造特征信息模型的基础上,结合基准信息建立了面向工序模型生成的工序信息模型.提出制造特征信息在工序模型中的映射机制,解决该模式下工序模型信息缺失的问题.以工序信息模型为模板,首先定义加工特征基元,然后通过实例化实现工序模型的变换.最后,通过集成工艺决策系统,构建三维工序模型生成系统,为后续工艺尺寸标注和工艺展示提供模型支持.     

多用酸洗缓蚀剂DSCH-1的研究

由含氮的脂肪胺、芳香胺等多种常用的有机缓蚀剂复配制成的ＤＳＣＨ－１ 缓蚀剂，在硝酸中对２０＃ 锅炉钢和紫铜的缓蚀效率达９９．７％ ，在盐酸中对２０＃ 锅炉的钢的缓蚀效率达９８．５％ ，对紫铜的缓蚀效率也较高。Ｆｅ３＋ 离子浓度对ＤＳＣＨ－１ 缓蚀性能有较大的影响     

Gamma rays from accreting matter onto collapsed objects

In the spherical accretion onto massive objects, the matter may be heated up to temperatures as high as 10¹² °K. In such a hot plasma, the thermal bremsstrahlung (e-e and e-p) and π° decay from inelastic collisions of protons are the main γ-ray sources. We determined the γ -ray production spectra from the π° decay and from bremsstrahlung for different temperatures. The expected γ-ray spectra were evaluated too in order to fit experimental data. We have fitted COS B data from 3C 273 using a two temperatures plasma model. The best fit is for

Full-size image (1K)

(M₈ is the black hole mass in 10⁸ M) which gives . The hard X-ray measurements do not contradict the bremsstrahlung spectrum.     

风洞电机的有关问题及其解决办法

风洞直流电机的换向不良、轴瓦磨损严重、轴承座漏油、维修不便等问题,一直令维修人员烦恼。本文针对这些问題,作了具体的分析,并且提出了切实可行的解决办法。     

基于SIO00D的飞机故障隔离手册规范研究与应用

飞机故障隔离手册（FIM）是判断和排除飞机故障的重要技术文档。通过对比基于ATA2200标准的故障隔离手册．初步研究了基于S1000D故障隔离手册的编写内容、编写规范和数据模块的编写方法．提出了编制我国民航飞机故障隔离手册的具体方法。     

3D音响告警系统原理算法和实验研究

本文介绍了一种基于虚拟听觉技术的新型告警系统,通过其原理算法介绍和原理样机实验表明了该系统的可实现性。