DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

基于S1,S2流面理论的液体火箭发动机涡轮内部流场计算

应用S1,S2流面理论对某大型液氢/液氧火箭发动机涡轮泵的两级轴流式涡轮内部跨声速流场进行计算和分析。流面的求解采用流线曲率法。将混合平面法的思想用于流线曲率法的求解过程中,对动、静叶排之间的相互干扰进行处理,将复杂的非定常问题简化为定常问题,从而简化计算。粘性的影响通过几种损失系数进行修正。计算结果较好地描述了涡轮内部的流动情况,为进一步完善涡轮设计、提高涡轮性能提供了理论依据。     

基于三维裂纹尖端应力场的应力强度因子计算方法

提出一种基于无限大体裂纹尖端弹性应力场理论解的前几项多项式函数,对实际裂纹体弹性应力场有限元解进行拟合来计算应力强度因子的方法.该方法在计算应力强度因子时不需要预先假设裂纹尖端的应力应变状态,应力强度因子计算结果更符合三维裂纹体裂纹尖端实际的应力应变状态.首先基于二维无限大板中心穿透裂纹应力场理论解验证了方法的有效性,探讨了拟合确定应力强度因子需要的多项式应力函数的项数.然后分别以二维大板中心穿透裂纹、三维大体内埋圆裂纹和三维有限厚板中心穿透裂纹的应力强度因子计算为例,通过与无限大板和无限大体应力强度因子理论解以及基于位移外推法和1/4节点张开位移法的应力强度因子有限元解的对比分析,验证了该方法的有效性和合理性.研究表明该方法能够合理反映三维裂纹体裂纹尖端的实际应力应变状态,计算得到的应力强度因子数值更合理.      

基于L_1自适应的超低空空投抗侧风控制律设计

针对超低空空投过程中侧风干扰与装备投放过程相耦合,影响载机飞行安全和空投任务的完成等问题,提出了基于L_1自适应的控制律设计方法。利用最优控制对系统线性部分做状态反馈并确定匹配参考模型,在此基础上,考虑系统的匹配和非匹配不确定性,设计L_1自适应控制器实现姿态保持,结合外环PID侧向轨迹控制器实现对航迹的稳定和保持。仿真结果表明,控制器具有优良的控制性能,对复杂侧风干扰和系统非线性不确定性具有很强的鲁棒性,且在高自适应增益下能有效抑制输入信号高频抖振。     

不同冶炼工艺对1Cr18Ni10Ti钢夹杂物的影响

通过试验研究了1Cr18Ni10Ti不锈钢的4种冶炼工艺:真空感应+电渣重熔、真空感应(陶瓷过滤器)、真空感应(陶瓷过滤器)+电渣重熔、真空感应+真空自耗,得到钢锭中夹杂物的种类、大小以及数量的变化.对比试验结果可知,采用真空感应(陶瓷过滤器)冶炼工艺与真空感应+真空自耗之后的钢锭的夹杂物水平相当,D类夹杂物数量最少,大颗粒夹杂物占比也最小.     

New results and questions of lunar exploration from SELENE,Chang’E-1, Chandrayaan-1 and LRO/LCROSS

The moon has longstanding questions such as lunar environments, origin, formation and evolution, magnetization of crustal rocks, internal structure and possible life. The recent lunar missions, e.g., SELenological and ENgineering Explorer “KAGUYA” (SELENE), Chang’E-1, Chandrayaan-1, and Lunar Reconnaissance Orbiter/Lunar CRater Observation and Sensing Satellite (LRO/LCROSS), have provided new opportunities to explore and understand these issues. In this paper, we reviewed and presented the results and findings in the fields of lunar gravity, magnetic field, atmosphere, surface geomorphology and compositional variations, volcano, craters, internal structure, water and life science from new lunar exploration missions. In addition, the new objectives and scientific questions on lunar explorations in near future are presented and discussed.     

高精度UT1-UTC差分预报方法研究

针对卫星导航所需的高精度地球定向参数(EOP)中的UT1-UTC预报问题,提出了基于双差分LS+AR的UT1-UTC参数预报方法。对UT1-UTC观测数据进行跳秒检测、固体地球带谐潮汐项改正,然后对改正后的UT1-UTC数据进行双差分处理,增强数据平稳性;采用最小二乘拟合(LS)与自回归(AR)分析方法对差分处理后的数据进行分析与预报;对预报结果进行逆差分处理与潮汐项改正外推、跳秒恢复,获取高精度的UT1-UTC预报值。通过与国际EOP_PCC预报结果对比表明,UT1-UTC短期预报精度与EOP_PCC较优的预报精度相当,其中1天UT1-UTC预报精度优于0.03ms,优于EOP_PCC预报结果。介绍了北京航天飞行控制中心的UT1-UTC每日例行预报情况。     

Orbital phase spectroscopy of four high mass X-ray binary pulsars to study the stellar wind of the companion

Our work focuses on a comprehensive orbital phase-dependent spectroscopy of the four High Mass X-ray Binary Pulsars (HMXBPs) 4U 1538-52, GX 301-2, OAO 1657-415 and Vela X-1. We hereby report the measurements of the variation of the absorption column density and iron-line flux along with other spectral parameters over the binary orbit for the above-mentioned HMXBPs in elliptical orbits, as observed with the Rossi X-ray Timing Explorer (RXTE) and the BeppoSAX satellites. A spherically symmetric wind profile was used as a model to compare the observed column density variations. Out of the four pulsars, only in 4U 1538-52, we find the model having a reasonable corroboration with the observations, whereas in the remaining three the stellar wind seems to be clumpy and a smooth symmetric stellar wind model appears to be quite inadequate in explaining the data. Moreover, in GX 301-2, neither the presence of a disk nor a gas stream from the companion was validated. Furthermore, the spectral results obtained in the case of OAO 1657-415 and Vela X-1 were more or less similar to that of GX 301-2.     

高速列车绕流的数值模拟

给出了用低速N－S方程求解高速列车绕流的数值计算方法，采用显隐式结合的方法来加快收敛速度，基于该方法编制了计算软件系统Train3D，用该软件系统对高速列车外形的外流场进行了数值模拟，获得了该外形的空气动力特性和流场结构。     

有机高分子絮凝剂处理高浊度原水效果和机理研究

本文研究了有机高分子絮凝剂ＰＡＭ、ＣＴＡＢ及它们的复配ＰＡＭ＋ＣＴＡＢ处理高浊度原水的最佳实验条件、絮凝性能、效果和机理，为有机高分子絮凝剂的选择和管式絮凝器的研制提供了理论依据。