变形飞行器建模及控制方法研究综述

针对变形飞行器的发展现状、气动建模、动力学建模以及控制方法研究进行了综述。首先阐述了变形飞行器的定义及变形需求,再从四个方面梳理了变形飞行器的技术优势。针对不同的机翼变形方式,对飞行器各种变形技术的特点及发展现状进行了详细的分析与总结;将变形飞行器与固定外形飞行器的气动机理进行了对比分析,并对变形飞行器的动力学建模方法进行了梳理,总结了各种方法的特点;结合变形飞行器自身特性分析了飞行控制的特点及难点,并详细阐述了各类变形飞行器的控制研究进展。最后总结分析了变形飞行器的发展趋势：深化基础理论与技术研究,从材料、结构及控制等领域全方面朝着智能化方向发展,最终实现变形飞行器的工程化、自主化、智能化应用。     

非均匀入口与化学非平衡效应对尾喷管性能的影响研究

基于煤油燃料超燃冲压发动机尾喷管,对均匀入口和非均匀入口、冻结流动模型和化学非平衡模型下的尾喷管内流动进行数值模拟,采用两方程RNG k-ε湍流模型对三维NS方程组进行求解,获得非均匀入口与化学非平衡效应对尾喷管性能的影响。计算结果表明,尾喷管内流动非均匀性由尾喷管非对称膨胀和燃烧室出口非均匀等因素构成,尾喷管入口流动参数非均匀分布对尾喷管推力、升力及俯仰力矩均有影响,算例中非均匀入口使得尾喷管净推力相对于均匀入口增加了1.2%左右;尾喷管性能受化学非平衡效应的影响,非平衡流动模型下的其净推力计算结果相对于冻结流动模型增加3%~4%。     

Singular formalism and admissible control of spacecraft with rotating flexible solar array

This paper is concerned with the attitude control of a three-axis-stabilized spacecraft which consists of a central rigid body and a flexible sun-tracking solar array driven by a solar array drive assembly. Based on the linearization of the dynamics of the spacecraft and the modal identi- ties about the flexible and rigid coupling matrices, the spacecraft attitude dynamics is reduced to a formally singular system with periodically varying parameters, which is quite different from a space- craft with fixed appendages. In the framework of the singular control theory, the regularity and impulse-freeness of the singular system is analyzed and then admissible attitude controllers are designed by Lyapunov＇s method. To improve the robustness against system uncertainties, an H∞ optimal control is designed by optimizing the H∞ norm of the system transfer function matrix. Comparative numerical experiments are performed to verify the theoretical results.     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

基于无网格算法的化学非平衡流数值模拟

为了验证AUSMPW+格式在无网格算法的精度等以及无网格算法能否用于复杂化学非平衡流数值模拟中,首先将AUSMPW+格式推广到无网格算法中,给出了AUSMPW+在无网格算法中的具体形式。其次,将无网格算法应用于带化学反应的多组分气体Euler方程的求解,给出无网格条件下求解化学非平衡流的具体过程。最后,对NACA0012跨声速绕流场、高超声速弹丸绕流场、氢气/氧气诱导燃烧流场、球锥高超声速绕流场、楔体斜爆轰流场进行了数值模拟。数值模拟结果与相关文献计算结果和实验结果吻合较好,表明了AUSMPW+格式在无网格算法中表现较高精度。同时,采用无网格算法能较好地模拟复杂化学非平衡流场,正确分辨复杂的物理现象,为化学非平衡流数值模拟提供一种新的算法,拓宽了无网格算法的应用范围。     

转子-支承耦合结构的模型修正研究

在转子-支承耦合结构的动力学分析过程中,结构模态参数计算结果与实验测试结果往往存在较大差异。针对此问题,应用优化算法对结构动力学模型进行修正,使计算模型能更准确地反映结构特性。建立由梁单元、盘单元、弹性支承单元组成的结构动力学有限元模型;选择优化目标函数、设计参数,并对各参数进行灵敏度分析。应用粒子群算法对选取的设计参数进行优化,得到最优模型。利用转子-滚动轴承实验器进行验证,结果表明,方法能够有效地实现转子-支承耦合结构的动力学模型修正,修正后模型更接近实际结构。     

基于ANSYS的机翼动力学分析

针对无人机在挂载导弹飞行和发射导弹时,无人机机翼由于受到多种载荷影响所产生的应力应变,应用ANSYS软件动力学分析,计算模拟了机翼在受到多种载荷影响时所产生的应力分布和应变量。分析结果表明,由于外挂物重量和机翼周围气动流场的影响,机翼会产生不同程度的颤振和扭转,其研究结果对合理设计机翼结构具有一定的参考意义。     

利用混合遗传算法的线性飞机动力学最大似然辨识

本文论述了利用混合遗传算法于线性飞机动力学特性的最大似然辨识。这种方法与其它最小化方法进行了比较，并且发现这种方法明显地优于简单的遗传算法。这种方法也与传统的ＭＮＲ（Ｍｏｄｉｆｉｅｄ Ｎｅｗｔｏｎ－Ｒａｐｈｓｏｎ）方法和单一方法进行了比较。与ＭＮＲ方法相比，该方法的优点是没有必要说明初始参数估计，即不必给定参数边界。也不会遇到以最佳化技术为基础的梯度有时明显引起的数值问题。如果适用时，结合初始参数估计也是简单的。