带有太阳电池阵的卫星电源系统在轨测试方法

根据带有太阳帆板的地球同步卫星在轨测试需求,分析了星上电源系统的组成及技术状态;并以光照区可调节母线为例。给出了卫星电源系统在轨测试方法及相应的计算公式;最后,通过工程验证了该方法的正确性。     

航空发动机故障诊断方法及测试流程分析

阐述了某型航空发动机工程研制中应用的发动机故障诊断方法及测试流程。根据发动机型号的使用特点和发动机故障诊断方法对FMECA分析结果进行故障分类,指出了各类故障在现有的测试技术下是否能进行故障诊断,并对能诊断的故障类型进行了详细的故障诊断及测试流程分析,经验证,发动机故障诊断方法及测试性流程可满足航空发动机型号的测试性需求。     

Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.     

民用飞机机载软件计划阶段评审方法研究

民用飞机机载软件的合格审定是民用飞机适航取证工作的重要内容,机载软件计划阶段评审是机载软件合格审定过程的重要里程碑,直接影响民用飞机主制造商的软件研制进度和适航取证进度。本文结合我国民用飞机机载软件研制过程中计划阶段工程评审与适航审查的经验,总结了适合我国国情的机载软件计划阶段评审的方法和流程,并对此过程中有关的重要问题进行了论述。     

An extrapolation approach for aeroengine’s transient control law design

Transient control law ensures that the aeroengine transits to the command operating state rapidly and reliably. Most of the existing approaches for transient control law design have complicated principle and arithmetic. As a result, those approaches are not convenient for application. This paper proposes an extrapolation approach based on the set-point parameters to construct the transient control law, which has a good practicability. In this approach, the transient main fuel control law for acceleration and deceleration process is designed based on the main fuel flow on steady operating state. In order to analyze the designing feature of the extrapolation approach, the simulation results of several different transient control laws designed by the same approach are compared together. The analysis indicates that the aeroengine has a good performance in the transient process and the designing feature of the extrapolation approach conforms to the elements of the turbofan aeroengine.     

航空工业六西格玛设计流程模式研究

针对航空产品研制的特点及现状水平,将常用的设计工具及方法融合到六西格玛设计的流程框架中,将流程、路线与设计工具、方法相整合,提出了两种适合于型号产品研制的六西格玛设计模式,同时指出了航空工业企业实施六西格玛设计时应注意的一些问题,为质量工作者提供建议和帮助。     

航空制造企业虚拟单元敏捷制造研究

利用零件聚类和工艺聚类两种聚类相结合的方法对零件加工流程进行模块化分解,形成制造系统的流程模块库。而针对实施过程中的共享资源的问题,可将单元外的加工转化为单元内的加工,使单元恢复封闭性和独立性;或者保留共享资源采用时间切片、优化排序算法来协调各单元的需求矛盾。     

操作相关的发动机载荷谱模型与仿真研究

以某型歼击机发动机重心法向过载谱为例,进行统计分析,建立了与操作相关的航空发动机载荷谱的数学模型,并验证了模型的合理性。研究表明:一个操作相关的发动机载荷谱可以用泊松随机过程描述,由持续时间分布和到达时间间隔分布以及载荷持续时间累积频次曲线和载荷穿级计数次数累积频次曲线等四个因素完全确定,其中持续时间和到达时间间隔均服从指数分布。在保证上述四个方面等效的基础上,提出了操作相关的载荷谱仿真方法,并对该发动机的重心法向过载谱进行了仿真,结果表明与实测载荷谱吻合较好,仿真方法可行。      

OpenGL在雷达图像实时显示中的应用

介绍了利用OpenGL实现图像显示的基本原理,主要探讨了在图形显示硬件的支持下,通过OpenGL光栅操作功能实现图像的实时显示。测试表明这种方法能够达到较大图像数据量实时显示的要求。