Satellite Constellation Design with Adaptively Continuous Ant System Algorithm

The ant system algorithm （ASA） has proved to be a novel meta-heuristic algorithm to solve many multivariable problems. In this paper, the earth coverage of satellite constellation is analyzed and a n ＋ 1^ -fold coverage rate is put forward to evaluate the coverage performance of a satellite constellation. An optimization model of constellation parameters is established on the basis of the coverage performance. As a newly developed method, ASA can be applied to optimize the constellation parameters. In order to improve the ASA, a rule for adaptive number of ants is proposed, by which the search range is obviously enlarged and the convergence speed increased. Simulation results have shown that the ASA is more quick and efficient than other methodV211.71s.     

带有太阳电池阵的卫星电源系统在轨测试方法

根据带有太阳帆板的地球同步卫星在轨测试需求,分析了星上电源系统的组成及技术状态;并以光照区可调节母线为例。给出了卫星电源系统在轨测试方法及相应的计算公式;最后,通过工程验证了该方法的正确性。     

印度自主研发的火箭低温级完成地面试验

据印度hindu网站2007年8月5日报道，印度本国研发的、将用于印度地球同步卫星运载火箭（GSLV）的低温级，于8月4日在泰米尔纳德的工厂完成了历时8min的地面试验。印度航天研究组织（ISRO）公布的消息称，低温级及其发动机的所有参数均正常。     

欧空局计划研发第二代“伽利略”卫星

据《国际飞行》2007年8月8日消息，在第一代卫星导航系统投入运行4年之前，欧空局（ESA）开始准备研发第二代“伽利略”卫星导航系统。     

Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.     

基于混合特征匹配的微惯性/激光雷达组合导航方法

微惯性/激光雷达(MEMS IMU/LADAR)组合导航系统在室内应用时,由于室内结构化环境下环境特征(如点和线段)分布稀疏,传统的单一特征匹配算法存在观测盲区,易造成导航定位参数估计误差大的问题。基于此,研究了激光雷达自适应数据分割方法的点和线段的特征提取算法,提出了基于混合特征匹配观测模型的MEMS IMU/LADR扩展卡尔曼滤波(EKF)算法。同时,设计了MEMS IMU/LADR组合导航试验样机,在室内环境下通过试验对滤波算法进行了验证。结果表明:提出的算法在室内结构化环境下相比传统单一点或线特征匹配组合定位算法的定位精度可提高60%,对于小型旋翼无人飞行器在室内结构化环境中的高精度定位具有较高的参考意义。     

数字域谱估计的GNSS系统信号带宽测试方法

针对传统的单载波扫频法不适于GNSS（全球导航卫星系统）信号生成通道的带宽测量的问题,提出了采用数字信号处理的信号带宽方法.对实际导航信号进行高速采样,在数字域对采样的导航信号和本地数字生成的理想导航信号进行频谱估计和计算,从而得到GNSS信号带宽.分别使用周期图法和Welch法谱估计,对提出的测试方法进行仿真.仿真结果表明,采用Welch法进行理想信号和实际信号谱估计,对谱估计后的结果进行计算,可以完成GNSS信号带宽精密测量,在Welch法估计参数设置合理的情况下,GNSS信号带宽估计的准确度可以达到99.9％以上.     

射流伺服阀用放大型超磁致伸缩执行器建模及分析

为提高射流伺服阀的动态性能,设计了采用桥式微位移放大机构的射流伺服阀用放大型超磁致伸缩执行器(AGMA)。建立了计输入位移损失的放大机构模型以及非线性位移输出理论模型,并采用有限元法对所建放大机构模型进行了对比验证,结果表明:放大机构的输入刚度模型最大误差0.78N/μm,放大倍数模型最大误差0.22,放大倍数受输入位移影响较小。最后,试验研究了AGMA的静动态特性,结果显示:控制电流在-0.5A到0.5A缓慢变化时,AGMA输出位移约为78μm;当控制电流从-0.5A跃变到0.5A时,其峰值位移约为71μm,峰值时间约为0.014s,调节时间小于0.1s;当控制电流幅值为0.5A时,其输出位移幅频宽40Hz,谐振频率约为30Hz。     

科学实验卫星高速上行链路设计

为保障在卫星与地面之间开展空间量子科学实验的条件,必须为科学实验载荷建立一条星—地高速数据双向传输链路.通过跟踪CCSDS-SLS-NGU（空间数据系统咨询委员会-空间链路业务-下一代上行链路）工作组对NGU的研究进展,结合科学实验卫星有效载荷建立高速上行链路的需求,采用高带宽利用率调制技术、高效信道编码方式及适用的链路数据传输协议,设计了一种传输速率为1Mbit/s、误码率优于1×10-9的高速上行链路方案,并给出星载设备实现方案和地面初步测试结果.该方案在技术体制上兼容已有CCSDS规范,便于地面站及星载接收机实现,完全满足开展空间量子科学实验的需要.