一种遥感图像建筑物检测新方法

遥感图像中的建筑物检测对于土地规划和地图绘制等具有重要意义。文章针对高分辨率全色遥感图像植被覆盖中隐蔽建筑物检测问题,提出了一种结合屋顶结构信息和纹理信息的快速房屋检测方法。首先利用屋顶边缘的几何关系寻找具有矩形屋顶的建筑物;然后使用形态学方法提取屋顶较亮的建筑物;最后利用局部二值模式（Local Binary Pattern,LBP）描述屋顶的纹理特征,并利用支持向量机（Support Vector Machine,SVM）排除误检区域。通过在全色遥感图像集上的试验证明,所提方法对高分辨率遥感图像植被覆盖区域中的建筑物目标具有较高检测率和较低误检率。     

25tf膨胀循环氢氧发动机研制进展

25 tf膨胀循环氢氧发动机是针对我国重型运载火箭三级主动力需求研制的液体火箭发动机,也可应用于未来其他航天器的上面级。该发动机采用闭式膨胀循环方式,具备高可靠、高比冲、大范围变推力以及多次点火等能力。发动机已通过推力室挤压热试验、氢涡轮泵介质试验等子系统试验验证了各项关键技术及组合件设计方案,发动机的整机方案实现已不...     

A salient edges detection algorithm of multi-sensor images and its rapid calculation based on PFCM kernel clustering

Multi-sensor image matching based on salient edges has broad prospect in applications, but it is difficult to extract salient edges of real multi-sensor images with noises fast and accurately by using common algorithms. According to the analysis of the features of salient edges, a novel salient edges detection algorithm and its rapid calculation are proposed based on possibility fuzzy C-means （PFCM） kernel clustering using two-dimensional vectors composed of the values of gray and texture. PFCM clustering can overcome the shortcomings that fuzzy C-means （FCM） cluster- ing is sensitive to noises and possibility C-means （PCM） clustering tends to find identical clusters. On this basis, a method is proposed to improve real-time performance by compressing data sets based on the idea of data reduction in the field of mathematical analysis. In addition, the idea that kernel-space is linearly separable is used to enhance robustness further. Experimental results show that this method extracts salient edges for real multi-sensor images with noises more accurately than the algorithm based on force fields and the FCM algorithm; and the proposed method is on average about 56 times faster than the PFCM algorithm in real time and has better robustness.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

弹射筒内筒组件钢球收压及检测工艺

本文对航空火箭弹射座椅弹射筒内筒钢球收压技术要求、难点进行了工艺分析;介绍了钢球收压工艺技术难点、检测方法及注意事项等,在工艺技术研究及设计过程中取得了一定的技术积累,具有良好的借鉴、推广应用意义。     

波音737NG飞机前缘缝翼位置指示故障的研究

波音737NG飞机经常发生前缘缝翼运动到指令位置后过渡灯不灭的故障,并导致多起严重不正常事件。为了对该故障进行有效预防,本文采取PDCA循环,分别在数据统计、原因分析、排故流程、航材准备等方面进行探索,最终提出更为合理的EO解决方案。     

Multi-h CPM遥测信号的定时频率联合估计技术

针对Multi-h CPM（Multi-h Continue Phase Modulation,多指数连续相位调制）遥测接收机的符号定时和载波频率同步问题,在分析MLSD（Maximum-likelihood Sequence Detection,最大似然序列检测）度量值是符号定时偏差和频率偏差的凸函数的基础上,提出一种基于迟/早门和升/降频门的符号定时和频率同步联合估计算法,通过似然值比较,对符号定时偏差和频率偏差进行迭代估计;并对该算法进行仿真,得到不同参数下的同步性能,给出同步参数选择建议.仿真结果表明：将该算法应用到Multi-h CPM遥测系统中,可实现低信噪比信号的快捕和高精度同步.     

单天基平台测向的空间非合作目标跟踪

针对仅含角度测量信息的单个天基平台可观测性较弱的问题,提出了一种含脉冲机动检测的空间非合作目标跟踪算法,并设计了非合作目标实时跟踪数据处理流程.该算法利用抗差估计技术和UKF（Unscented Kalman Filter,无迹卡尔曼滤波）算法构造目标跟踪滤波器,并综合残差多项式拟合和新息分布特征等方法实现目标机动检测,在天基平台观测信息类型有限和观测几何较差的情况下,可以同时排除孤立野值和成片测量野值的影响,实现非合作机动目标的连续稳定跟踪.数值实验验证了算法的可行性和有效性,也表明了跟踪精度和可靠性与测量精度密切相关.     

海战场电子干扰环境下雷达作用距离建模与仿真

针对如何模拟海战场电子干扰环境下雷达作用距离这一问题,首先,分析了雷达检测因子与虚警概率、检测概率的关系;然后,在考虑电子干扰功率的基础上建立了综合信干比模型,利用综合信干比与检测因子之间的关系确定了雷达作用距离;最后,通过仿真分析,验证了模型的有效性和适用性。