2D C/SiC-ZrB2复合材料的烧蚀性能

用ZrB2微粉对2D C/SiC基体进行改性,研究了化学气相渗透结合浆料浸渍及先驱体浸渍裂解工艺制备2DC/SiC-ZrB2复合材料在氧-乙炔焰和1800℃甲烷风洞环境中的烧蚀行为.结果表明:在氧-乙炔环境中,2D C/SiC-ZrB2的线烧蚀率和质量烧蚀率分别为6.1×10-2 mm/s和1.0×10 -2g/s,相对2D C/SiC复合材料而言,ZrB2微粉并没有提高C/SiC复合材料的抗烧蚀性能.在1800℃甲烷风洞环境中,涂层致密度起主要作用,涂层致密度相同时,复合材料的开气孔率越大,质量烧蚀率越大,ZrB2微粉的渗入对C/SiC复合材料的烧蚀性能影响不大.     

复合材料后掠翼机翼气动弹性分析

对于复合材料后掠翼机翼,扭转发散问题一般并不突出,其操纵面的操纵效率和颤振临界动压是比较关心的两个问题.文章采用 COMPASS 软件,对某复合材料后掠翼飞机进行了操纵效率分析,并重点计算了该机在不同高度下颤振速度随马赫数的变化情况,详细分析了机翼振动、颤振特性随蒙皮不同铺层比变化情况.结果表明,舵面操纵效率随着马赫数的增加而降低,飞机设计要通过设计参数调整选择合适的副翼反效动压与扭转发散动压之比,使飞行范围内的操纵效率尽可能高;同时复合材料后掠机翼的弯扭耦合效应相当突出,而复合材料剪裁可以调整0°、±45°、90°铺层比例,提高结构扭转刚度,从而提高飞机颤振速度     

航空企业自动化立体仓库输送系统的调度优化

运用粒子群算法解决航空企业自动化立体仓库中输送系统的调度优化问题.针对某主机厂自动化立体仓库输送系统的特点,采用分拣上/下包台、出/入库台、AGV运行的时间总和最小化作为性能指标,用粒子群算法的基本原理作为优化思想,然后使用 MATLAB软件进行算法仿真,分析结果的合理性.结果表明,该模型及仿真结果是合理的,效率高,满足航空企业使用需求.     

Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

跨声速风扇叶片变形对气动性能的影响

为了研究跨声速风扇叶片变形对气动性能的影响,发展了流固耦合方法计算风扇叶片在气动力作用下变形的数值程序,耦合求解了三维可压缩雷诺平均的Navier-Stokes (N-S)方程和描述叶片振动的结构动力学方程,并模拟了跨声速风扇Rotor 67转子叶片在气动载荷下的变形,重点分析了由于叶片变形带来的气动性能的变化.      

冷却剂/氧化剂组合式SteamJet发动机特性

为了系统深入地研究冷却剂/氧化剂组合式射流预冷却涡轮发动机(SteamJet)的发动机特性,建立了射流预冷却的热交换系统计算、物性修正计算、发动机部件特性修正计算和含氧化剂的燃烧室计算的数学模型,在此基础上,建立了基于双轴混排加力式涡扇发动机的SteamJet发动机性能计算模型,并编制了相应的计算程序。初步设计了SteamJet发动机的最大加力状态控制规律,计算分析了SteamJet发动机在不同冷却剂/氧化剂配比下沿飞行轨道的特性,并据此提出了影响冷却剂/氧化剂配比选择的主要因素;对冷却剂/氧化剂组合式SteamJet发动机进行了高度速度特性的计算和分析。结果表明,与喷水预冷却的SteamJet发动机相比,冷却剂/氧化剂组合式SteamJet发动机具有更好的燃烧稳定性和推力特性,能够满足高超声速飞行的需求。     

C/SiC复合材料微结构的显微CT表征分析

利用显微CT表征了采用化学气相渗透法(CVI)制备的3D C/SiC复合材料的三维结构,评价了显微CT的微结构表征能力.结果表明:显微CT能够有效地分辨C/SiC复合材料的织构形貌、材料内部缺陷(孔隙和SiC基体密度差异).通过重构孔隙的三维结构,揭示了CVI过程预制体内部存在沉积气体滞留;通过重构孔隙壁的形貌,揭示了...     

基于Linux军用TCP/IP协议栈设计与实现

提出一种在嵌入式Linux操作系统上运行TCP/IP协议的解决方案。介绍了Linux内核,在此基础上结合嵌入式系统特点,对TCP/IP协议栈进行简化,提出总协议栈的体设计。根据军用通讯要求着重讨论了网络协议的安全问题,参考现在通用的网络安全模式PGP,对TCP/IP协议栈进行修改,主要是在应用层中加入了加密、认证以及密钥分配过程。加密过程采用DES和RSA组合算法,保证其安全性、可行性以及时效性。     

气体润滑弹性波箔片轴承动态特性分析

通过摄动方法并结合气体润滑压力控制Reynolds方程和气膜压力、气膜厚度及箔片变形等变量的Taylor展开式,推导出弹性波箔片轴承气膜动力特性系数计算微分方程组.同时,考虑气体可压缩性等因素,建立气膜厚度、箔片变形和气膜压力三者之间关系的数学模型方程组.运用Newton-Raphson迭代法和有限差分法耦合求解气膜动...     

Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach

This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, inviscous hypersonic aerodynamic force calculation and scramjet engine modeling. The parameters are designed for airframe-propulsion integration configuration, the aerodynamic force calculation is based on engineering experimental methods, and the engine model is acquired from gas dynamics and quasi-one dimensional combustor calculations. Multivariate fitting is used to obtain analytical equations for aerodynamic force and thrust. Furthermore, the fitting accuracy is evaluated by relative error (RE). Trim results show that the model can be applied to the investigation of control method for AHV during the cruise phase. The modeling process integrates several disciplines such as configuration design, aerodynamic calculation, scramjet modeling and control method. Therefore the modeling method makes it possible to conduct AHV aerodynamics/propulsion/control integration design.