复合材料机身帽型长桁加筋壁板压缩屈曲及失效特性研究

大型客机机身壁板材料现已广泛采用碳纤维复合材料,研究壁板的屈曲及失效特性对提高结构设计效率具有重要的意义。采用工程分析、有限元分析和试验三种方法研究压缩载荷下复合材料机身帽型加筋壁板的屈曲载荷、失效载荷和失效模式;通过工程方法和有限元方法研究压缩载荷下壁板的屈曲形式和载荷,采用 Von Karman 法修正的柱失稳方法研究壁板在压缩载荷下的承载能力;依靠先进的机身壁板多轴载荷试验系统完成 3 m×2 m 机身壁板的压缩载荷试验、压缩充压复合载荷试验,验证并完善工程和有限元分析方法。结果表明：屈曲分析时需要对工程分析和有限元方法进行修正,失效分析时采用修正的柱失稳方法的分析结果比试验结果略保守。     

广州白云国际机场容量分析

本文针对广州白云国际机场的空侧对机场的容量的影响进行分析，并提出提高机场容量的方法。     

空间飞行体与压缩区内等离子体非稳态相互作用的控制方程

本文详细研究了压缩区内飞行体与等离子体之间的非稳态相互作用，得到了这种相互作用的控制方程。作为辐射源的飞行体天线系统，可以激发出可探测到的电磁弧波。带电粒子密度扰动对电磁弧波的影响表现为一个振幅的衰减因子。这表明，可通过对这种电磁弧波的探测而发现隐身飞行体的踪迹。     

半无限深理想势流中圆柱形结构固有振动的求解

本文利用加权残数法，求解了浸沉半无限深理想势流中圆柱形结构的固有振动。数值算例表明，这种方法，计算量适中，试函数的选取合理，适用于工程中对水下下航行体固有振动的求解。     

前减振器压缩阻力和复原阻力的计算

分析了摩托车前减振器复原阻力和压缩阻力的形成过程，阐述了前减振器阻尼力的一般计算方法，并可由此计算出减振器的P－S曲线（示功图）和P－V线（速度特性）。     

渐近严格伪压缩映象的Mann迭代序列

证明了希尔伯特空间上的渐近严格伪压缩映象的Ｍａｎｎ迭代序列的收敛性定理。     

Damage characteristics and constitutive modeling of the 2D C/Si C composite: Part I – Experiment and analysis

This paper reports an experimental investigation on the macroscopic mechanical behaviors and damage mechanisms of the plain-woven(2D) C/Si C composite under in-plane on- and offaxis loading conditions. Specimens with 15, 30, and 45 off-axis angles were prepared and tested under monotonic and incremental cyclic tension and compression loads. The obtained results were compared with those of uniaxial tension, compression, and shear specimens. The relationships between the damage modes and the stress state were analyzed based on scanning electronic microscopy(SEM) observations and acoustic emission(AE) data. The test results reveal the remarkable axial anisotropy and unilateral behavior of the material. The off-axis tension test results show that the material is fiber-dominant and the evolution rate of damage and inelastic strain is accelerated under the corresponding combined biaxial tension and shear loads. Due to the damage impediment effect of compression stress, compression specimens show higher mechanical properties and lower damage evolution rates than tension specimens with the same off-axis angle. Under cyclic tension–compression loadings, both on-axis and off-axis specimens exhibit progressive damage deactivation behaviors in the compression range, but with different deactivation rates.