OpenGL在雷达图像实时显示中的应用

介绍了利用OpenGL实现图像显示的基本原理,主要探讨了在图形显示硬件的支持下,通过OpenGL光栅操作功能实现图像的实时显示。测试表明这种方法能够达到较大图像数据量实时显示的要求。     

An extrapolation approach for aeroengine’s transient control law design

Transient control law ensures that the aeroengine transits to the command operating state rapidly and reliably. Most of the existing approaches for transient control law design have complicated principle and arithmetic. As a result, those approaches are not convenient for application. This paper proposes an extrapolation approach based on the set-point parameters to construct the transient control law, which has a good practicability. In this approach, the transient main fuel control law for acceleration and deceleration process is designed based on the main fuel flow on steady operating state. In order to analyze the designing feature of the extrapolation approach, the simulation results of several different transient control laws designed by the same approach are compared together. The analysis indicates that the aeroengine has a good performance in the transient process and the designing feature of the extrapolation approach conforms to the elements of the turbofan aeroengine.     

MCS-51单片机数字化艇弹协调仪的设计方法

论述了艇弹协调仪硬件系统的设计方法及基本原理,并给出了系统运行的软件流程框图。     

企业管理过程中的协调工作

企业管理具有系统性 ,要求企业下属各层次组织和人员之间的联系必须围绕企业的经营管理目标 ,高度协调、统一步调 ,形成企业整体的优势 ,确保企业经营管理目标的实现。企业管理过程中的协调工作是企业管理一项非常重要的管理职能 ,是企业管理的核心内容 ,具有全局性和综合性 ,在企业管理过程中具有重要的作用和地位。要做好协调工作 ,关键是要明确协调工作的性质和内容 ,遵循正确的工作原则 ,讲求正确的工作方法。     

操作相关的发动机载荷谱模型与仿真研究

以某型歼击机发动机重心法向过载谱为例,进行统计分析,建立了与操作相关的航空发动机载荷谱的数学模型,并验证了模型的合理性。研究表明:一个操作相关的发动机载荷谱可以用泊松随机过程描述,由持续时间分布和到达时间间隔分布以及载荷持续时间累积频次曲线和载荷穿级计数次数累积频次曲线等四个因素完全确定,其中持续时间和到达时间间隔均服从指数分布。在保证上述四个方面等效的基础上,提出了操作相关的载荷谱仿真方法,并对该发动机的重心法向过载谱进行了仿真,结果表明与实测载荷谱吻合较好,仿真方法可行。      

脉冲爆震发动机工作过程控制和协调试验

利用开环控制系统,在直径180mm,长度2000mm,采用气动阀模拟飞行进气、燃用汽油的脉冲爆震发动机(PDE)样机上,对PDE的工作过程控制和协调进行了试验研究,得到了在不同的PDE工作过程时间分配下的试验结果,由此详细分析了在开环控制的情况下,PDE协调工作的条件及不能正常工作的原因,为PDE的设计和控制系统的研制提供重要的参考价值。     

基于MFCS直升机协调转弯模态设计

为了消除直升机的侧滑,在已设计完成的具有优良操纵特性的直升机显模型跟踪控制系统(MFCS)基础上,开发了协调转弯模态;按照直升机协调转弯基本要求,开发了基于 MFCS协调转弯模态控制律,给出了结构配置及系统参数设计方法。经仿真表明,所开发的直升机协调转弯模态具有优良的特性。     

基于人的可靠性分析的现代航空技术

唯有减少人工操作环节.才能从根本上减少人为差错发生几率。提出了维修可靠性和操作使用可靠性的概念,介绍了一些基于人的可靠性分析的航空使用、维修技术和关键技术未来发展。     

Vibration Reduction of Open-chain Flexible Manipulators by Optimizing Independent Motions of Branch Links

In order to suppress vibration in flexible manipulators, a new type of manipulator mechanism with controllable local degrees of freedom is proposed. This mechanism consists of a main chain and some branch links. The main chain is of a flexible open-chain configuration with an end-effector installed at its tip, and the rigid branch links are able to perform active movements. It is proved by kinematics and dynamic analysis that, the branch links bear no direct kinematic relation to the main chain, but their independent motions can strongly affect the dynamic behavior and performance of the flexible manipulator. Then comes a new idea of suppressing vibration, in which independent motions of the branch links are used to suppress the undesired vibration of the flexible main chain through dynamic coupling. On this basis, an optimal method for reducing vibration of flexible manipulators is proposed. Finally, the effectiveness of this method is verified by numerical simulations.     

Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.