浅谈基于IPDT的民用飞机重量控制技术

在民机研制过程中,有效地实施重量控制对于项目的成功非常关键。飞机超重不仅会导致设计和运营成本的增加,也将无法实现既定的商载和航程等设计指标。从各部门与重量控制工作的联系出发,结合某型民用飞机的设计实践,介绍了产品联合研发团队(IPDT)模式下重量控制的工作内容、工作流程和常用的减重方法,为民机的重量控制工作提供借鉴和参考。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

直升机的气动弹性问题

直升机的气动弹性问题与固定翼飞机不同,不仅要考虑单片桨叶,更要将旋翼视为一个整体,考虑其动态入流、尾迹影响以及旋翼与机身之间的相互耦合等。就单片桨叶而言,在结构动力学上,需要考虑离心力场、几何非线性以及桨叶的非线性挥舞-摆振-扭转耦合;在气动力上,需要考虑动态入流以及桨尖处可能的失速效应,本质上属于非线性气动弹性力学范畴。由于旋翼气动力通常是以周期形式通过旋翼轴传给机身,并引起机身振动,而机身运动又通过改变桨叶根部形态反过来影响旋翼的气动弹性特性,这种旋翼/机身耦合问题,也是近年来直升机气动弹性问题研究中的重要方向和热点之一。此外,随着旋翼流场数值分析方法的日趋成熟,采用动态重叠网格或滑移网格方法来实现桨叶运动,并通过动网格技术来实现桨叶的弹性变形,从而实现弹性旋翼流场的数值模拟,目前正呈现出勃勃生机,成为直升机气动弹性研究的又一重要方向和热点。随着各种新构型直升机的相继出现,如倾转旋翼机、前行桨叶概念旋翼(ABC)直升机和复合式直升机等,也带来了新的气动弹性问题。不断发现问题、解决问题,推动本学科持续发展,永远是气动弹性工作者终身奋斗的目标。     

基于滑模干扰观测器的高超声速飞行器滑模控制

首先,针对存在外部干扰和输入饱和的通用式高超声速飞行器的纵向动态模型,提出一种基于滑模干扰观测器的抗饱和滑模控制器。该滑模控制器采用非线性趋近律,在保证系统快速、稳定跟踪指令的同时,能够消除传统滑模控制中的抖振现象,并针对执行器饱和问题,加入抗饱和补偿器,以提高系统的稳定性。其次,对于系统中存在的干扰和不确定性,提出一种滑模干扰观测器,用以准确估计系统中存在的等效干扰,并将该观测器对干扰的估计值应用于滑模控制器中进行补偿,以消除干扰。再次,利用Lyapunov理论对所提出的基于滑模干扰观测器的抗饱和滑模控制器进行稳定性分析。最后,对高超声速飞行器的巡航状态进行仿真。仿真结果表明,所提方法能够有效提高系统的稳定性和抗干扰性,具有一定的实际应用价值。     

小展弦比飞翼布局新型嵌入面航向控制特性研究

在小展弦比飞翼布局机翼外侧上/下表面分别设计了一组中等后掠角嵌入面,并对其跨声速时的航向控制效果及其流动机理进行了风洞试验和数值模拟研究。计算和试验结果表明,上嵌入面可在小迎角范围通过轴向力和侧向力的共同作用提供稳定的偏航力矩,实现航向控制;当α6°时,由于嵌入面逐渐处于前缘涡的影响范围内,在前缘涡的吸力作用下,嵌入面航向控制效果迅速下降,直至失效,且进行航向控制时存在不利的滚转耦合;下嵌入面可在全迎角范围内提供稳定的偏航力矩,实现航向控制;通过在小迎角范围内使用上嵌入面,α6°时使用下嵌入面,不仅可在全迎角实现航向控制,且不影响飞机的隐身性能。     

空客A320飞机起落架系统非典型故障分析

介绍了几起空客A320飞机起落架系统比较少见的故障,通过查阅飞机排故手册并根据系统工作原理排除了故障,排故经验可供机务维护人员借鉴。     

基于密切曲锥的乘波构型一体化飞行器设计方法研究

描述了基于密切曲锥的乘波构型一体化飞行器设计方法。其特点是采用曲面乘波压缩前体,前体进气道压缩面基准流场由激波和等熵压缩波轴对称流场组成,三维乘波面采用密切曲锥方法由前缘线各点流线跟踪拟合构成流面;前体上表面由变半径轴对称特征线法生成基准流场并流线跟踪构成流面;尾喷管根据发动机燃烧室出口参数构造特征线流场并流线跟踪得到膨胀型面。快速的分析工具采用工程计算、一维燃烧室计算与经验公式相结合的方法对飞行器性能进行初步评估。所设计的三米量级一体化模型飞行器通过数值计算和风洞试验对性能进行了验证,结果表明,飞行器在设计状态基本达到设计要求,发动机正常点火工作,飞行器得到正推力,采用的气动性能快速分析估算方法对气动力的预测较为准确。     

基于概率统计的DS/FH系统干扰检测算法

基于时频分布的干扰检测算法是DS/FH（Direct Sequence/Frequency Hopping,直接序列扩频/跳频扩频）系统干扰检测的传统手段,针对其运算量大、实时性差,以及无法检测某些特殊干扰信号等问题,提出一种基于概率统计的干扰检测算法.通过统计DS/FH系统频谱图中各频率的幅值出现位置,以DS/FH信号与干扰信号频谱分布规律的差别为判决依据,完成DS/FH系统中干扰信号的检测.分析和仿真结果表明：该检测算法能够有效识别DS/FH系统中的典型干扰信号,与传统基于时频分布的检测算法相比,能够实现某些特殊干扰信号的有效检测;同时,由于该算法不需要进行复杂的时频联合分析,其运算复杂度大大降低,能够实现DS/FH系统干扰信号的快速检测.     

无线电高度表信号模拟器射频信号延时/衰减模块设计

无线电高度表程控信号模拟器是无线电高度表自动测试系统（ATE,ATS）的重要组成部分,而射频信号延时/衰减模块则是无线电高度表程控信号模拟器3个功能模块组件中的核心模块。研制了一种采用声表面波（SAW）延迟线作为射频信号延时器件、射频衰减器作为射频信号功率衰减器件,通过程控射频开关控制不同声表面波延迟线的切换,包含射频信号变频、放大等结构电路的无线电高度表信号模拟器射频信号延时/衰减模块。经无线电高度表自动测试系统的实际工程应用表明,该无线电高度表射频信号延时/衰减模块对C波段（4.2～4.4 GHz）射频调制信号的延时精度高、衰减范围大,体小、质轻,适合置于无线电高度表测试适配器内部使用,具有较高的工程应用价值。