从F100看战斗机发动机研制思想的进步

自20世纪60年代后期,F100发动机经历了方案论证、型号研制、初期使用、耐久性提高、改进改型、使用保障等阶段,目前仍是第3代前线战斗机F-15和F-16的主要动力装置.通过F100发动机的研制历程,可以发现无论是F100发动机性能极大提高与改进改型成功的经验,还是F100发动机使用初期故障频发、与空军出现争议、转入生产遇到困难、批量使用故障时发等,都值得总结和借鉴.     

小子样精度鉴定技术研究

讨论了小子样下的Bayes精度鉴定技术研究的一般方法,分析了考虑验前信息可信度时方差的检验,检验分为简单假设和复杂假设2种情况。给出了临界区域以及犯弃真和采伪两类错误的概率。仿真结果表明了方法的合理性。     

Effect of vertical plasma transport on ionospheric F2-region parameters at equatorial latitude

The variability of the F2-layer even during magnetically quiet times are fairly complex owing to the effects of plasma transport. The vertical E × B drift velocities (estimated from simplified electron density continuity equation) were used to investigate the seasonal effects of the vertical ion drifts on the bottomside daytime ionospheric parameters over an equatorial latitude in West Africa, Ibadan, Nigeria (Geographic: 7.4°N, 3.9°E, dip angle: 6°S) using 1 year of ionsonde data during International Geophysical Year (IGY) of 1958, that correspond to a period of high solar activity for quiet conditions. The variation patterns between the changes of the vertical ion drifts and the ionospheric F2-layer parameters, especially; f_oF₂ and h_mF₂ are seen remarkable. On the other hand, we observed strong anti-correlation between vertical drift velocities and h′F in all the seasons. We found no clear trend between N_mF₂ and h_mF₂ variations. The yearly average value of upward daytime drift at 300 km altitude was a little less than the generally reported magnitude of 20 ms⁻¹ for equatorial F-region in published literature, and the largest upward velocity was roughly 32 ms⁻¹. Our results indicate that vertical plasma drifts; ionospheric F2-layer peak height, and the critical frequency of F2-layer appear to be somewhat interconnected.     

基于相空间重构的f_0F_2一步预测算法研究

利用低纬度地区某垂测站2005年3月和4月两个月,f0F2参数共5856个数据样奉,对提前15min的一步预测算法进行了研究.基于混沌时间序列的相空间重构方法,以相近邻点轨迹具有相似性为预测理论基础,采用k最近邻点的方法对下一时刻的,f0F2进行预测.对邻点个数的选取采用了训练法和自适应选择法,对选出的邻点采用平均法和自回归两种方法进行处理,并对几种不同方法的预测结果进行了比较.结果证明,基于相空间重构的一步预测算法预测精度较高,并且容易实现,运算速度高,适用于电离层参数准实时预报.     

Parameterized Regional Ionospheric Model and a comparison of its results with experimental data and IRI representations

We describe a Parameterized Regional Ionospheric Model (PARIM) to calculate the spatial and temporal variations of the ionospheric electron density/plasma frequency over the Brazilian sector. The ionospheric plasma frequency values as calculated from an enhanced Sheffield University Plasmasphere–Ionosphere Model (SUPIM) were used to construct the model. PARIM is a time-independent 3D regional model (altitude, longitude/local time, latitude) used to reproduce SUPIM plasma frequencies for geomagnetic quiet condition, for any day of the year and for low to moderately high solar activity. The procedure to obtain the modeled representation uses finite Fourier series so that all plasma frequency dependencies can be represented by Fourier coefficients. PARIM presents very good results, except for the F region peak height (hmF2) near the geomagnetic equator during times of occurrence of the F₃ layer. The plasma frequency calculated by IRI from E region to bottomside of the F region present latitudinal discontinuities during morning and evening times for both solar minimum and solar maximum conditions. Both the results of PARIM and the IRI for the E region peak density show excellent agreement with the observational values obtained during the conjugate point equatorial experiment (COPEX) campaign. The IRI representations significantly underestimate the foF2 and hmF2 compared to the observational results over the COPEX sites, mainly during the evening–nighttime period.     

一类多状态系统的可靠性计算

多状态n中连续取k系统是二值状态n中连续取k系统扩展到多状态的一般模型.多状态n中连续取k系统可靠性的求解问题是可靠性工程中一个热点和难点.当元件及系统具有多状态时分析了系统的可靠性与元件的可靠性之间的关系.对于系统处于不同状态时具有不同的可靠性结构的情形,提出了计算多状态n中连续取k坏系统可靠性的递归算法.实例对比说明了该方法的正确性和可用性.该方法不仅适用于递减或递增多状态系统,而且对系统及部件所处的状态数目的大小不加要求,为进一步研究复杂多状态系统奠定了基础.      

F3 layer feature under low and medium solar activity observed at a Chinese low latitude station Fuke

Ionogram observations from the ionosonde at Fuke (9.5°N geomagnetic latitude), a Chinese low latitude station, in 2010–2012 are analyzed to present the features of F3 layer under low and moderate solar activity conditions. Structure of the ionogram, displaying the F3 layer, was more distinct and clear during MSA than LSA periods especially during spring to summer. Start time of occurrence of the F3 layer is about at 0830–0900 LT and is approximately the same for LSA and MSA conditions. The average duration time of the F3 layer occurrence was 181 min per day under F_10.7 = 75 condition, 263 min in F_10.7 = 99 and 358 min in F_10.7 = 125, respectively. The differences of h′F2 and h′F3 exhibited obvious semiannual variation observed at Fuke from March 2010 to June 2012 and increased with increasing solar activity. The difference of foF2 and foF3 in the months February, March, September, October and November is less evident in the middle solar activity period 2011–2012 than the low solar activity 2010 and in the other period it shows a slight increase (0.5 MHz) or keeps constant. The results show that the solar activity dependence of the F3 layer occurrence at low latitude away from the magnetic equator is different from that at near the magnetic equator.     

太阳F10.7指数准27天振荡的小波分析

利用1956-2003年的F10.7日均值数据,采用Morlet小波变换方法,分析了准27天振荡的特征及与太阳活动11年周期(Schwabe周期)的关系.结果表明,F10.7的准27天振荡的幅度和周期存在明显的短期变化现象,不同年里变化的程度差别很大,有些年里起伏非常剧烈,在几天到几十天的很短时间里,幅度变化达十几倍,周期可变化数天,甚至发生十几天的突变;有些年里,幅度变化很大但起伏很小,周期也比较稳定.准27天振荡的年平均幅度存在明显的逐年变化,与太阳活动显著相关.一般说来,F10.7越高,准27天振荡的幅度就越大,然而在太阳活动19周峰年,F10.7比其他活动周的值都高,但准27天振荡的幅度却比其他活动周低.准27天振荡的周期也有明显的逐年变化,除了个别年(如1987年),年平均周期在24至31天之间变化,与太阳活动周期没有明显的关系.48年的平均周期为27.3天.从总体看,周期有逐渐缩短的趋势,48年里周期大约减少了1.5天.造成准27天振荡起伏的因素非常复杂,有待深入研究.      

基于液体金属的接触PIM抑制方法和实验验证

接触非线性是射频设备和电路中产生无源互调（passive intermodulation，PIM）信号的重要原因之一。基于对接触结点射频等效电路的分析，提出了一种基于共晶镓铟合金（eutectic gallium-indium，EGaIn）的PIM抑制方法。EGaIn不同于传统的焊锡，它可以在室温下实现接触结位置上的稳定、可重构连接。首先分析了射频（radio frequency，RF）下的金属接触结的电路模型。其次设计并实现了两个包含不同金属接触结构且工作在2.6GHz的平面倒F天线（planar inverted F antenna，PIFA）。最后比较了EGaIn焊接前后PIFA的互调水平，其中对PIM指标的最大抑制程度为35dB。验证了EGaIn可以在室温下对PIFA的接触结点进行可重构焊接，这为电连接中的非线性抑制提供了一种参考方法。