三轴稳定卫星无陀螺姿态确定算法研究

针对三轴稳定卫星进行了正常飞行模式下无陀螺姿态确定算法研究，采用磁强计、地球敏感器和太阳敏感器组合获得姿态数据，利用四元数法和高斯－马尔可夫过程建立了姿态确定估计器算法模型。通过数学仿真证明，此姿态确定算法能够对星体姿态进行较精确的估计或校正，满足卫星控制精度要求。     

基于改进A^*算法的无人机快速轨迹规划方法

针对旋翼无人机在三维障碍物环境中自主飞行时路径搜索速度慢、轨迹生成通常忽略无人机动力学特性的问题,发展一种基于改进A^*算法并同时考虑无人机动力学特性和运动学性能的快速轨迹规划方法。首先,在三维障碍物环境中运用改进A^*算法通过剔除部分网格节点降低A^*算法的节点计算量,提升算法的路径搜索速度;其次,以最小化飞行轨迹的四阶导数作为目标函数,以路径点处的位置、速度、加速度等各阶导数作为约束条件优化飞行轨迹;最后,在三维障碍物环境中对比A^*算法改进前后的路径搜索结果,并对优化的飞行轨迹进行仿真飞行测试。结果表明:改进A^*算法大幅降低了A^*算法的节点计算量,显著提升了路径搜索速度;且无人机能够始终以较小位置误差沿优化轨迹光滑连续飞行。     

基于GPS与磁强计组合的姿态确定

提出了一种基于信息融合的姿态确定方法用于姿态确定。利用星上的GPS接收机和磁强计两种敏感的测量，基于广义卡于尔曼滤波理论及信息融合理论，发展了基于此两种敏感器的全局最优融合估计算法。来确定卫星的姿态和姿态角速度。并对处法进行了设计和仿真，通过与单独使用GPS确定姿态的算法进行对比分析。结果验证了该算法进行对比分析，结果验证了该算法的优越性。     

精密GPS卫星钟差的改正和应用

分析了GPS卫生钟差的变化特性，探讨了利用GPS地面跟踪站的观测数据估算GPS卫星钟差的可行性，建立了相应的算法和软件系统，并把由地面跟踪站的实测数据估算的卫星钟差用于星载GPS定轨计算，得到优于1m的定轨精度。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

飞机附件的维修间隔决策

研究了飞机附件软时限的设定和管理方法,该方法可将附件的故障发生机率和运行风险控制在可接受水平,减少航空公司因机务原因的延误,提高飞机可利用率。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

改进联邦滤波器在小卫星姿态确定中的应用

采用微小卫星姿态运动学、动力学方程,以磁强计／太阳敏感器为姿态敏感器进行姿态确定,研究了一种基于融合反馈的改进联邦滤波算法,提出了一种基于观测新息修改的信息分配原则。给出了由四元数描述卫星姿态的误差状态方程,并对观测矢量进行推导,获得了基于角速度的观测方程,丰富了观测模型。仿真结果表明：基于角速度观测方程的引入,增强了观测信息的利用率,进而提高了姿态确定的精度,降低了计算量,保证了可靠性。     

孔边裂纹塑性应变疲劳扩展试验研究

简介了循环J积分ΔJ*path体系,以16MnR钢单边椭圆孔边裂纹试件进行了6种循环应力比的恒幅应变疲劳裂纹扩展试验,采用材料应变疲劳循环加载条件下的应力-应变关系,通过弹塑性有限元素法计算ΔJ*path参量,研究了孔边高应变区裂纹塑性应变疲劳扩展规律。结果表明：ΔJ*path能够作为缺口高应变区裂纹塑性应变疲劳扩展的控制参量,与裂纹扩展速率da/dN之间的指数关系,可通过相同材料的标准试件应力疲劳裂纹扩展由Paris公式与ΔJ*path=ΔK2/E转换得到。     

真空羽流场的 N-S 和 DSMC 耦合数值模拟

根据调姿发动机真空羽流场的特点,采用差分求解Ｎ－Ｓ方程数值模拟喷管内流场,用ＤＳＭＣ方法数值模拟喷管外羽流场,得到了符合流动规律的数值模拟结果。为姿控发动机喷管设计提供了参考,并为真空羽流污染研究打下了良好的基础。