万工显滑板移动直线度的检修

通过对影响万能工具显微镜滑板移动直线度的分析 ,提出有针对性的修理方法 ,并分别论述了产生线值偏差和角度偏差的主要原因。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

提高《供配电技术》教学效果的有效途径

根据供配电教学实践，从优化课程内容、激发学生学习动机、课程内容程序化、利用实物形象教学、创造课堂教学情景、课堂活动的转换等方面，探讨了提高高职院校该专业课教学效果的有效途径。     

全站仪检测数据管理系统

介绍了全站仪检测数据管理系统。本系统以FoxPro for Windows为基础,采用模块结构,具有对检测数据录入修改,自动转换,成果计算,查询显示等功能,实现了系统数据管理和处理的一体化。     

面向模块化配置生产的大型飞机装配规划与仿真技术

大型飞机装配具有学科领域多、精度要求高、协调产业链广、工作量大等特点,是大型飞机研制周期、质量和成本的决定性环节。目前国内航空企业更多在单点上引入数字化产品定义MBD以及装配仿真等技术,业务仍然采用传统设计制造分离模式,未形成先进的数字化装配工程应用体系。本文对国内外航空企业的数字化装配技术应用现状进行了分析,提出了先进业务管理、数字化制造工程设计、装配仿真验证相融合的集成框架,并对其中的关键技术进行了论述。最后,基于该研究成果构建了装配规划及仿真的工程应用集成环境,并对应用于某大型飞机研制中的工程化效果进行了描述。     

万工显误差修正不确定度分析与计算

分析影响万工显测量精度的误差因素，以单项误差修正为基础，对仪器的多项误差进行全面修正，并对修正后的仪器测量不确定度进行分析与计算。     

计算机体系结构发展趋势分析

在调研和综合大量文献的基础上，对目前计算机体系结构的发展现状和可能趋势进行了分析，并结合测控需要，重点分析了适用范围内的RISC服务器的发展。     

提高HDL综合质量的探讨

提出了EDA工具QuartusⅡ和LeonardoSpeetrum组合方式在Altera公司CPLD器件开发中的应用．解决了目前集成电路设计的复杂和门级电路不易管理的一些问题。同时给出了可编程逻辑器件的开发流程以及在设计思路和语言使用上来简化、优化电路设计以提高HDL综合质量的几点探讨。     

可编程逻辑器件的设计与开发

概括介绍可编程逻辑器件CPLD的主要特点、EDA软件平台和VHDL开发语言。介绍在EDA软件平台的支持下,采用VHDL语言开发以可编程逻辑器件CPLD为核心的现代数字系统设计方法和开发设计流程。     

Mechanism of error propagation from the subdaily Universal Time model into the celestial pole offsets estimated by VLBI

Within the analysis of space geodetic observations, errors of the applied subdaily Earth rotation model can induce systematic effects in different estimated parameters. In this paper, we focus on the impact of the subdaily Universal Time (UT1) model on the celestial pole offsets (CPO) estimated from very long baseline interferometry (VLBI) observations. We provide a mechanism that describes the error propagation from the subdaily UT1 into the daily CPO.In typical 24-h VLBI sessions the observed quasars are well distributed over the sky. But the observations, if looked at from the Earth-fixed frame, are not homogeneously distributed. The amount of observations performed in different terrestrial directions shows an irregularity which can be roughly compared to the case where the observations are collected in only one Earth-fixed direction. This peculiarity leads to artefacts in VLBI solutions, producing a correlation between the subdaily variations in UT1 and the position of the celestial pole. As a result errors in diurnal terms of the subdaily UT1 model are partly compensated by the estimated CPO. We compute for each 24-h VLBI session from 1990 until 2011 the theoretical response of the CPO to an error in the subdaily UT1 by setting up a least-squares adjustment model and using as input the coordinates of the observed quasars and observation epochs. Then real observed response of the estimated CPO derived from the VLBI session solutions is compared to the predicted one. A very good agreement between the CPO values estimated from VLBI and the predicted values was achieved. The presented model of error propagation from the subdaily UT1 into the daily CPO allows to predict and explain the behaviour of CPO estimates of VLBI solutions computed with different subdaily Earth rotation models, what can be helpful for testing the accuracy of different subdaily tidal models.