Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

基于层次评估理论的弹道导弹末段突防制导律研究

针对弹道导弹末段突防问题,应用层次性能评估体系,对弹道导弹末段典型突防制导律进行对比分析.并通过对弹道导弹制导精度、弹道导弹最大过载、弹道飞行时间和反导导弹脱靶量以及它们的均值、均方差的重要性和需求性分析,合理设置评估体系的指标及其权值,应用随机仿真分析方法,对比仿真经典比例导引、修正比例导引和变结构比例导引三种突防制导律的性能.仿真结果证明,层次评估理论可以用于弹道导弹末段突防制导律的评估及优选.     

Hierarchical space–time block codes signals classification using higher order cumulants

An efficient method for blind classification of space–time block codes(STBCs) based on fourth-order cumulants is proposed for a single receiver antenna.This paper presents a model of received STBCs signals in multiple input single output(MISO) communication systems and applies the characteristics of coding matrices to derive analytical expressions for the fourth-order cumulants to be used as the basis of an algorithm.The fourth-order cumulants at various delay vectors present non-null values that depend on the transmitted STBCs.Tests of nullity are accomplished by hypothesis testing.The proposed algorithm avoids the need for a priori information of modulation scheme,channel coefficients,and noise power.Consequently,it is well suited for non-cooperative scenarios.Simulations show that this method performs well even at low signal-to-noise ratios(SNRs).     

火箭多台发动机并联推力传递结构动静耦合计算方法

针对运载火箭多台发动机并联推力传递结构在工作中力学环境适应性问题,开展了动静耦合动力学计算方法研究。该研究分析了动静耦合机理,并以此为基础,计算了有无静载的结构模态频率和推力传递结构关键部位随机振动响应。结果表明,火箭推力传递结构在大推力作用下,结构的刚度发生改变,进而影响动力学特性。相关研究结果为火箭多台发动机并联推力传递结构动静联合试验提供了参考意义。     

飞行器集群协同制导控制方法及应用研究

分析了目前多飞行器协同作战的发展现状与趋势,指出了多飞行器以编队形式进行协调与配合,可以有效提高突防概率与作战效能。针对飞行器集群协同制导控制技术,分析梳理了相关的技术难点。然后,分别对协同任务规划与动态目标分配方法和多飞行器编队协同控制方法、多约束条件下的分布式协同制导方法的国内外研究现状进行了介绍。最后对飞行器集群协同制导控制技术进行了总结,并对未来的发展方向进行了展望。     

航空发动机多变量模糊滑模变结构模型跟踪控制

针对现代航空发动机是一个具有不确定性的强非线性系统,结合滑模变结构控制和模糊逻辑系统的优点,提出了一种模糊滑模变结构模型跟踪控制方法。采用比例积分型切换超平面设计滑模变结构控制系统,使用模糊逻辑系统自适应调节切换增益,得到某涡扇发动机的模糊滑模变结构模型跟踪控制器。数字仿真结果表明,所设计的控制器不但能使被控对象较好地跟踪参考模型,消除抖振现象,而且对系统的不确定性具有不变性,保证了被控系统在整个控制阶段都具有较强的鲁棒性。