美国一体化导弹防御系统研究

从美国一体化导弹防御系统的内涵入手,系统地研究了美国导弹防御系统的结构、作战指挥、试验,以及国际合作的情况,最后总结其未来发展趋势。     

太阳帆航天器移位轨道设计

研究了太阳帆日心移位轨道的稳定性、控制律设计及轨道拼接。将柱坐标形式的太阳帆动力学方程在参考移位轨道附近线性化,得到线性变分方程。分析线性变分方程的特征值在复数平面上的位置就可以得到移位轨道的稳定性条件。设计了太阳帆日心移位轨道的控制律,并证明了控制律满足稳定性条件。该控制律仅要求太阳帆在移位轨道飞行时姿态角α保持不变。此外,太阳帆移位轨道可以与开普勒轨道相互转化,也可以与移位轨道之间相互拼接。     

An error analysis and optimization method for combined measurement with binocular vision

The accurate measurement of surfaces of large aviation components is vital for the assessment of manufacturing and assembly quality of such components. To satisfy the measurement requirement of large-size components, most current researches pay more attention to combined measurement methods utilizing different measuring instruments, but the related researches on error analysis and optimization methods are not taken enough attention. This paper proposes a combined laser-assisted measurement method with feature enhancement techniques, and it also develops an error propagation model of the main factors affecting the overall measurement error in detail. Firstly, the surface of a large-size component is measured by the measurement system at multiple stations. Secondly, a control point coordinate system is established as a bridge to unify all local measurement data into the global coordinate system. To improve the overall measurement accuracy, the pixel extraction error as a key factor causing the overall measurement error is analyzed in detail. Next, the error propagation model is established, and some optimization strategies of layout for minimizing measurement error and transformation error are researched. Finally, experiments are carried out to verify the effectiveness of the proposed method. The results show that the measurement error of the proposed method reaches 0.073% and 0.14% with a 1D standard ruler and a flat plate, respectively.     

低速风洞绳牵引并联支撑系统的模型气动试验研究(英文)

根据绳牵引并联机构的优点,建造了一种新型的用于低速风洞试验的飞机模型绳牵引并联支撑系统,研究该系统中模型的空气动力参数的测量与计算方法。文中对机构进行了静力学分析,建立了描述实验模型气动载荷的数学模型,提出了通过测量绳系拉力求得模型空气动力参数的解算方法;设计并构建了绳系拉力测量及数据采集系统;将该系统置于开口式回流低速风洞中进行了吹风试验,采集了模型在不同姿态和不同风速下的各牵引绳的拉力数据,并对数据进行了处理分析,通过解算得到了不同吹风条件下模型的气动载荷参数曲线。研究结果表明,绳牵引并联机构用于低速风洞试验的支撑系统是可行的。     

空气预冷发动机及微小通道流动传热研究综述

首先针对发动机空气预冷系统的特点,将现有的预冷机制分为四种类型,包括燃料预冷、质量喷注预压缩冷却、燃料预冷和质量喷注预压缩冷却组合预冷以及其他流体预冷,并分别介绍了每种预冷机制的代表性发动机循环以及技术特点。调研发现,微小通道结构的预冷器具有很高的散热能力和紧凑度,优势显著。英国Skylon空天飞机的预冷却组合循环发动机（SABRE）其微通道结构预冷器具有极高换热能力。对SABRE的预冷器及相关研究进行详细分析,强调微小通道强化换热对提高发动机性能的重要作用。通过对微小通道中单相气态流动换热研究的调研发现,微尺度流动传热机理仍存在诸多分歧,理论发展不完善,需要深入开展微小通道强化传热研究,尤其对于高速高内外温差条件下微小尺度复杂结构空间内流动传热机理需要深入探索。     

基于非线性静力学模型的飞机系留载荷计算方法研究

由于飞机在强风下系留时,机体承受各方向的载荷较大,因此需对系留结构及系留索是否具有足够的承载能力进行分析,而其中系留载荷的计算就显得异常重要。采用MSC．Nastran软件,针对飞机存系留情况下,系留索的单向承载性及起落架与地面的非线性接触特性,通过应用非线性间隙单元,建立了非线性静力仿真模型,并计算了飞机在系留状况下,各系留索承受的张力及各系留点所受的载荷,计算中同时考虑了起落架缓冲支柱空气弹簧力对于系留载荷的影响,从而为飞机系留载荷提供了一种新的有限元计算方法。     

基于低矮建筑物实测数据的改进湍流物理模型

要准确模拟低矮建筑物壁面上分离涡位置的平均风压比较困难,这些区域在绕钝体流动中也是很关键的部位.本文在Spalart-Allamaras湍流物理模型的基础上,根据钝体绕流流场特性,结合低矮建筑物上的实测数据,调试并选取合适的参数,提高涡粘预测的准确性,提出了改进的S-A湍流物理模型.通过对6m立方体和Silsoe低矮建筑模型进行稳态数值模拟,由改进S-A湍流模型得到的屋面、背风和侧风面上平均风压结果,比目前公认的模拟钝体绕流效果较好的SST湍流模型有较大改善,比风洞实验更接近实测结果.由此可以看出,本文改进湍流模型的方法,将是一条提高预测建筑物表面平均风压精度很有效的途径.     

斜向弹性支撑飞船座椅缓冲性能

当出现具有较大水平速度的斜冲击着陆工况时,飞船座椅头盆向冲击过载可能危及航天员生命安全。在现有的胸背向着陆冲击过载缓冲机构的基础上,引入座椅斜向弹性支撑模型,建立了斜向弹性支撑座椅缓冲系统的动力学模型。对具有较大水平速度的斜冲击着陆工况的仿真结果表明,相比于现有的铰接支撑缓冲系统,适当参数组合下的斜向弹性支撑座椅缓冲系统能有效降低航天员头盆向冲击过载且不增加胸背向冲击过载;综合支撑角度、刚度和阻尼各个参数影响规律,可以得到优化的座椅设计方案。     

火箭发动机尾罩热分离流场的数值模拟

潜射导弹的发动机一般用尾罩加以保护以防止海水侵蚀,发动机点火后尾罩存在热分离过程,本文应用非定常数值模拟方法和动网格技术数值模拟了发动机尾喷管超声速流场的建立过程,分析了高温燃气与尾罩碰撞后反射流动对发动机防护罩的非定常载荷,计算结果表明本文计算方法可以用来数值研究广泛存在的气流瞬态冲击效应。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.