固体发动机喷管烧蚀和温度场测量

介绍了含铝复合推进剂发动机试验时,对其喷管进行的烧蚀和温度场测量,获得了复合喷管结构中的烧蚀和瞬时温度分布.     

一种新的运载火箭上面级和航天器轻型增压系统

为减小运载火箭上面级和航天器增压系统的体积和质量，设计了一种新的轻型主、副两路定压力值控制增压系统。该系统可最大限度利用气瓶内气体，具有冗余增压结构，提高了系统可靠性，并设置气动隔离活门。适于多次启动飞行，且结构简单。有关的测试和飞行试验结果表明，所设计的增压系统主、副路工作协调，反应迅速，性能稳定可靠。     

碳纤维复合材料高压球形容器研制

采用变带距方法对球形容器进行优化设计，并研制了一批产品。试验结果表明，在纤维设计应力相同条件下，采用变带距缠绕的球形容器，其复合材料重量比等带距缠绕的轻２４．５６％，而其容器特性系数高出１０．４％，能同时满足设计提出的强度和重量两方面要求。     

具有衬里的纤维缠绕压力容器分析

给出了具有衬里的纤维缠绕压力容器纤维厚度的设计计算方法。当容器的结构一定时，给出了确定爆破压强的方法。     

灵敏度温度自补偿薄膜压力传感器的研制

溅射薄膜压力传感器具有长期稳定性好、耐高温等优点,但是由于受弹性体材料自身特性的影响,传感器的灵敏度温度误差大,大约在1.5×10-4~2×10-4/F.S℃,是导致传感器测量误差大的原因之一。在弹性体上设计加工灵敏度温度补偿电阻,使应变电阻和灵敏度温度误差补偿电阻可以在同一时间感受温度,比在后续电路上进行温度补偿,温度响应快。对灵敏度温度自补偿压力敏感元件进行设计与研制。实测结果表明,采用灵敏度温度自补偿工艺技术的敏感元件,灵敏度温度误差较小,可以控制在0.25×10-4/F.S℃以下,传感器的温度性能得到了提高。     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

一种新的四路激光跟踪坐标测量系统的基点标定方法

在激光跟踪三维坐标测量系统中,系统首先要经过标定,才可以进行实际测量。因此系统标定的准确度会直接影响系统最终测量准确度。为了提高标定准确度,提出一种新的标定方法,即利用直线法原理,在优化布局下,采用两路激光干涉仪测量出基点的三维坐标。仿真结果表明目标点相对于基点呈对称分布时,测得的基点坐标准确度比非对称分布时高6到7倍,并通过实验得出了在该优化布局下的基点坐标。     

Prompt effects of solar wind variations on the inner magnetosphere and midlatitude ionosphere

It is well known that the solar wind can significantly affect high-latitude ionospheric dynamics. However, the effects of the solar wind on the middle- and low-latitude ionosphere are much less studied. In this paper, we report observations that large perturbations in the middle- and low-latitude ionosphere are well correlated with solar wind variations. In one event, a significant (20–30%) decrease of the midlatitude ionospheric electron density over a large latitudinal range was related to a sudden drop in the solar wind pressure and a northward turning of the interplanetary magnetic field, and the density decrease became larger at lower latitudes. In another event, periodic perturbations in the dayside equatorial ionospheric E × B drift and electrojet were closely associated with variations in the interplanetary electric field. Since the solar wind is always changing with time, it can be a very important and common source of ionospheric perturbations at middle- and low-latitudes. The relationship between solar wind variations and significant ionospheric perturbations has important applications in space weather.     

混合与扩散同时进行的环形引射系统引射性能实验研究

本文设计了“混合与扩散同时进行”的环形引射系统,并结合其驱动引射式风洞,实验探讨了该系统的参数影响规律及混合特性,结果表明,引射器系统采取“同时混合扩散”方式可达到与传统的“等截面混合后再扩散”的方式相当的性能,但新方式下则大大缩短了系统结构尺寸,因而具有重要的实用意义。实验表明“同时混合扩散”方式只宜于应用在具有周向喷流特点的系统中,同时混合扩散角应与常规扩散角相当(β=6°)。研究表明,讨论喷流马赫数Ma_j对性能的影响应与面积比A_2/A_*的变化独立开来,Mα_j变化对性能的影响不超过10％,而面积比变化对性能的影响十分显著,在面积比与膨胀比适当的配合下,可获得较高的系统效率。     

气体渗碳过程的动态控制

利用气体渗碳物质传递数学模型来仿真计算碳浓度分布，并根据计算结果在计算机上拟合出碳浓度与时间、温度、气氛碳势之间的关系式，此关系式对气体渗碳的动态控制具有指导意义。