圆柱体落水过程多相流体动力特性数值分析

针对圆柱体大角度落水过程多相流动问题,采用VOF多相流模型和重叠网格技术分析了低弗劳德数条件下圆柱体落水过程空泡演化、水动力特性以及尺度效应的影响。结果表明:不同直径的圆柱体落水空泡均发生拉断闭合,且空泡闭合时间随弗劳德数增加而线性增大。除落水抨击和空泡闭合阶段外,升力系数在空泡闭合前的平均增长率比空泡闭合后快。阻力系数从落水撞击至空泡闭合阶段变化一致,但是在空泡闭合后出现分化现象。     

Soybean cultivation for Bioregenerative Life Support Systems (BLSSs): The effect of hydroponic system and nitrogen source

Soybean [Glycine max (L.) Merr.] is one of the plant species selected within the European Space Agency (ESA) Micro-Ecological Life Support System Alternative (MELiSSA) project for hydroponic cultivation in Biological Life Support Systems (BLSSs), because of the high nutritional value of seeds. Root symbiosis of soybean with Bradirhizobium japonicum contributes to plant nutrition in soil, providing ammonium through the bacterial fixation of atmospheric nitrogen. The aim of this study was to evaluate the effects of two hydroponic systems, Nutrient Film Technique (NFT) and cultivation on rockwool, and two nitrogen sources in the nutrient solution, nitrate (as Ca(NO₃)₂ and KNO₃) and urea (CO(NH₂)₂), on root symbiosis, plant growth and seeds production of soybean. Plants of cultivar ‘OT8914’, inoculated with B. japonicum strain BUS-2, were grown in a growth chamber, under controlled environmental conditions.     

波音737NG飞机自动油门电门组件故障研究

总结了波音737NG飞机自动油门电门组件的故障现象，在数据分析的基础上，确认了电门组件失效的原因，探讨了航线排故方法，并给出测量微动电门电阻的施工参考标准。     

An estimation of tropospheric corrections using GPS and synoptic data: Improving Urmia Lake water level time series from Jason-2 and SARAL/AltiKa satellite altimetry

Tropospheric correction is one of the most important corrections in satellite altimetry measurements. Tropospheric wet and dry path delays have strong dependence on temperature, pressure and humidity. Tropospheric layer has particularly high variability over coastal regions due to humidity, wind and temperature gradients. Depending on the extent of water body and wind conditions over an inland water, Wet Tropospheric Correction (WTC) is within the ranges from a few centimeters to tens of centimeters. Therefore, an extra care is needed to estimate tropospheric corrections on the altimetric measurements over inland waters. This study assesses the role of tropospheric correction on the altimetric measurements over the Urmia Lake in Iran. For this purpose, four types of tropospheric corrections have been used: (i) microwave radiometer (MWR) observations, (ii) tropospheric corrections computed from meteorological models, (iii) GPS observations and (iv) synoptic station data. They have been applied to Jason-2 track no. 133 and SARAL/AltiKa track no. 741 and 356 corresponding to 117–153 and the 23–34 cycles, respectively. In addition, the corresponding measurements of PISTACH and PEACHI, include new retracking method and an innovative wet tropospheric correction, have also been used. Our results show that GPS observation leads to the most accurate tropospheric correction. The results obtained from the PISTACH and PEACHI projects confirm those obtained with the standard SGDR, i.e., the role of GPS in improving the tropospheric corrections. It is inferred that the MWR data from Jason-2 mission is appropriate for the tropospheric corrections, however the SARAL/AltiKa one is not proper because Jason-2 possesses an enhanced WTC near the coast. Furthermore, virtual stations are defined for assessment of the results in terms of time series of Water Level Height (WLH). The results show that GPS tropospheric corrections lead to the most accurate WLH estimation for the selected virtual stations, which improves the accuracy of the obtained WLH time series by about 5%.     

Resistance Spot Welding Method for Metal-Based Fiber Bragg Grating Sensors

Aiming at the requirements of installation and work environment of metal-based fiber Bragg grating(FBG)sensor,a resistance spot welding method is presented.Firstly,the effect of welding parameters on welding quality is discussed theoretically,and a suitable resistance spot welding method for the metal-based FBG sensor is proposed for the first time.Then through serial resistance spot welding tests,the feasibility and practicability of the method are verified,and optimal welding parameters for two different tested metals are obtained.Fatigue performance test validates FBG sensors installed by the proposed method with good fatigue properties and long-term stable measurement performance.The research results can provide technical guidance for engineering structure long-term safety monitoring.     

经济学视角下的企业变革阻力问题研究

从经济学视角出发,发现企业变革中存在阻力问题的原因主要表现在以下三个方面:一是路径依赖使企业变革受到惯性阻力;二是信息不对称使得员工恐惧产生变革阻力;三是变革的风险成本大于收益,困扰企业变革前进的脚步。基于此,要消除企业变革的阻力问题可以从加强对员工的培训力度、让员工参与变革、塑造共同愿景、建立强有力的领导团队以及提高员工对变革的适应性等几个方面着手。     

大型飞机气源起动装备供气流程设计与计算

为了研发具有自主知识产权的气源起动装备,立足于大型飞机较高压力、超大流量的特殊气源起动保障需求,设计了以双级无油螺杆压缩为核心技术的供气流程,对其中涉及的级间压力、散热量、除水量等关键参数进行了分析与计算,为解决超大流量气源的二次升压、风冷散热、高温除水等核心技术难题奠定了基础。     

Time distribution of the precipitable water vapor in central Saudi Arabia and its relationship to solar activity

Water vapor is the most important greenhouse gas. It plays a major role in the dynamics of atmospheric circulation, radiation exchange within the atmosphere, and climate variability. Knowledge of the distribution of water vapor is important for understanding climate change and global warming.     

The impact of microwave absorber and radome geometries on GNSS measurements of station coordinates and atmospheric water vapour

We have used microwave absorbing material in different geometries around ground-based Global Navigation Satellite System (GNSS) antennas in order to mitigate multipath effects on the estimates of station coordinates and atmospheric water vapour. The influence of a hemispheric radome – of the same type as in the Swedish GPS network SWEPOS – was also investigated. Two GNSS stations at the Onsala Space Observatory were used forming a 12 m baseline. GPS data from October 2008 to November 2009 were analyzed by the GIPSY/OASIS II software using the Precise Point Positioning (PPP) processing strategy for five different elevation cutoff angles from 5° to 25°. We found that the use of the absorbing material decreases the offset in the estimated vertical component of the baseline from ∼27 mm to ∼4 mm when the elevation cutoff angle varies from 5° to 20°. The horizontal components are much less affected. The corresponding offset in the estimates of the atmospheric Integrated Water Vapour (IWV) decreases from ∼1.6 kg/m² to ∼0.3 kg/m². Changes less than 5 mm in the offsets in the vertical component of the baseline are seen for all five elevation cutoff angle solutions when the antenna was covered by a hemispheric radome. Using the radome affects the IWV estimates less than 0.4 kg/m² for all different solutions. IWV comparisons between a Water Vapour Radiometer (WVR) and the GPS data give consistent results.     

Experimental study on effect of inclination angles to ammonia pulsating heat pipe

In this paper, a novel study on performance of closed loop pulsating heat pipe（CLPHP）using ammonia as working fluid is experimented. The tested CLPHP, consisting of six turns, is fully made of quartz glass tubes with 6 mm outer diameter and 2 mm inner diameter. The filling ratio is50%. The visualization investigation is conducted to observe the oscillation and circulation flow in the CLPHP. In order to investigate the effects of inclination angles to thermal performance in the ammonia CLPHP, four case tests are studied. The trends of temperature fluctuation and thermal resistance as the input power increases at different inclination angles are highlighted. The results show that it is very easy to start up and circulate for the ammonia CLPHP at an inclining angle.The thermal resistance is low to 0.02 K/W, presenting that heat fluxes can be transferred from heating section to cooling section very quickly. It is found that the thermal resistance decreases as the inclination angle increases. At the horizontal operation, the ammonia CLPHP can be easy to start up at low input power, but hard to circulate. In this case, once the input power is high,the capillary tube in heating section will be burnt out, leading to worse thermal performance with high thermal resistance.