卫星表面材料体、面电阻率测试方法及电压对体、面电阻率影响的研究

对卫星表面材料的体电阻率、面电阻率的测试方法进行了研究,并设计了测量电极系统,测量了常用热控涂层的体、面电阻率,研究了测量电压对测量结果的影响。     

Cf / ZrB2 -SiC 复合材料的制备及抗热冲击性能

采用前驱体转化法制备Cf / ZrB2 -SiC 复合材料,对材料的热物理和热震性能进行了研究。采用 扫描电镜和X 射线衍射分析材料的微观结构及物相变化。结果表明:复合材料在1 700℃热震循环10 次材料 保持完整,表现出了良好的抗热震性能。通过微观结构分析,高温氧化后生成的多孔SiO2 氧化层能够吸收热 应力,缓解因热震带来的巨大温度差,ZrB2 组元的加入有效地提高了材料抗热震性。     

Multifunctional Martian habitat composite material synthesized from in situ resources

The two primary requirements for a Martian habitat structure include effective radiation shielding against the Galactic Cosmic Ray (GCR) environment and sufficient structural and thermal integrity. To significantly reduce the cost associated with transportation of such materials and structures from earth, it is imperative that such building materials should be synthesized primarily from Martian in situ resources. This paper illustrates the feasibility of such an approach. Experimental results are discussed to demonstrate the synthesis of polyethylene (PE) from a simulated Martian atmosphere and the fabrication of a composite material using simulated Martian regolith with PE as the binding material. The radiation shielding effectiveness of the proposed composites is analyzed using results from radiation transport codes and exposure of the samples to high-energy beams that serve as a terrestrial proxy for the GCR environment. Mechanical and ballistic impact resistance properties of the proposed composite as a function of composition, processing parameters, and thermal variations are also discussed to evaluate the multifunctionality of such in situ synthesized composite materials.     

Exploration life support technology challenges for the Crew Exploration Vehicle and future human missions

As NASA implements the U.S. Space Exploration Policy, life support systems must be provided for an expanding sequence of exploration missions. NASA has implemented effective life support for Apollo, the Space Shuttle, and the International Space Station (ISS) and continues to develop advanced systems. This paper provides an overview of life support requirements, previously implemented systems, and new technologies being developed by the Exploration Life Support Project for the Orion Crew Exploration Vehicle (CEV) and Lunar Outpost and future Mars missions. The two contrasting practical approaches to providing space life support are (1) open loop direct supply of atmosphere, water, and food, and (2) physicochemical regeneration of air and water with direct supply of food. Open loop direct supply of air and water is cost effective for short missions, but recycling oxygen and water saves costly launch mass on longer missions. Because of the short CEV mission durations, the CEV life support system will be open loop as in Apollo and Space Shuttle. New life support technologies for CEV that address identified shortcomings of existing systems are discussed. Because both ISS and Lunar Outpost have a planned 10-year operational life, the Lunar Outpost life support system should be regenerative like that for ISS and it could utilize technologies similar to ISS. The Lunar Outpost life support system, however, should be extensively redesigned to reduce mass, power, and volume, to improve reliability and incorporate lessons learned, and to take advantage of technology advances over the last 20 years. The Lunar Outpost design could also take advantage of partial gravity and lunar resources.     

Theoretical investigation on water/metal fuel ramjet motor-thermodynamic cycle and thermodynamic calculation

For achieving high-speed requirement of underwater vehicle,a conceptual engine,which utilizes the hydroreactive characteristic of several metals under supercavitation environment,has been put forward. Especially,in order to obtain specific impulse as great as possible,a dual water injection system is taken into account. Then thermodynamic cycle model,which lead the improvement of power plant and energy system,is introduced in detail,and thermal efficiency is also analyzed. Furthermore,for investigating the performance of this kind of engine system,detailed thermodynamic calculation and analysis are achieved. Especially,regarding hydroreactive metal fuel Mg/AP/HTPB as our target fuel-rich propellant,considering its obvious deficient oxygen property and the energy property of magnesium/water reaction,theoretical calculation method is established by integrating chemical non-equilibrium with chemical equilibrium. Accordingly,low limit of primary water/fuel ratio is determined. In addition,the qualitative and quantitative relationship of performance parameters,such as theoretical specific impulse,nozzle exit temperature,characteristic velocity,etc.,versus water/fuel ratio is investigated respectively.      

受限浸没射流阵列冲击针肋热沉的传热特性

以去离子水为工质,对受限浸没射流阵列冲击矩形针肋热沉的传热特性进行了实验研究.讨论了热沉几何参数和射流雷诺数对传热特性的影响规律.结果表明:针肋高度直接影响换热能力,但并非越高越好;热沉传热特性受针肋宽度与肋间距影响较大,Nu在0.625≤W/G≤1.000内呈塔型分布;Nu在2.5≤H/d≤10.0之间不断下降;S/d在3.00~4.50之间,Nu随S/d的增大单调递增,但Re增大到4000后,换热性能与S/d基本无关;S/d在4.50~7.00之间,Nu随S/d的增大单调递减;热沉的热阻随泵功的增大而降低,但变化渐趋平缓.      

航空电气系统绝缘电阻自动测试系统

针对飞机电气系统绝缘测试部位和设备数量繁多、手动测试效率低、容易造成事故隐患等问题,介绍了一种航空电气系统绝缘电阻的自动化测试方法,设计并实现了通用航空电气系统绝缘电阻自动测试系统、该系统运用工控机自动控制与测试技术,自动完成测试,并实现数据处理、信息存贮等功能。应用表明该系统安全可靠、自动化程度高、测试速度快、可扩展性强。     

适用无人机的小型燃料电池控制方法

燃料电池动力系统作为一种长航时电动无人机的动力方案,其燃料电池的控制技术是决定动力系统可靠性和高效性的关键技术。针对用于无人机的小型空冷型开放阴极的质子交换膜燃料电池,考虑面向工程应用的燃料电池整体控制过程,兼顾电堆温度控制和水管理,提出了一种前馈型模糊PID的电堆温度控制方法,同时设计了一种基于安时积分门限法的膜水含量调节策略,以实现对整个燃料电池系统的高效控制。通过搭建燃料电池温度控制与水管理试验平台,对所提出的控制技术进行了试验验证,并与现有温控和水管理方法进行了对比分析。试验结果表明：所提前馈型模糊PID方法在较长时间的燃料电池启动过程中能够较快地达到目标温度,相比于PID方法减少了7%的调节时间,与传统模糊PID方法相当;燃料电池电流持续减小时,所提前馈型模糊PID方法对超调量的抑制效果具有明显优势,其超调量仅为PID方法的34%,为传统模糊PID方法的43%;所提安时积分门限排水控制方法既能防止水淹故障,又可提高燃料经济性,在所给工况中相比现有方法节约了15%的氢气。     

新型民用客机水系统选型研究

民用飞机水系统的功能是在飞行中为机上乘客提供饮用水、盥洗用水和马桶冲洗用水。水系统作为飞机上与乘客生活息息相关的系统,舒适性的要求越来越被关注。目前,飞机上使用的水系统方案各式各样,对于不同的飞机需求,各种方案各有各的特点。针对国际新型飞机上已经开始采用的水系统的各种方案进行了权衡研究,重点研究了水系统几种控制方式的优缺点以及机电综合控制技术作为新技术在新型民用飞机上的应用,同时介绍了灰水的几种处理方式、比较常用的几种水龙头以及其优缺点分析。针对某种飞机型号,根据飞机的市场定位和需求,介绍了如何选择一套合适的系统方案,来提高该飞机的经济性和实用性,为我国民用飞机水系统的研制提供一定的参考。     

含滚阻摩擦平面多体系统的建模和数值方法

针对含滚阻和摩擦的平面多体系统,给出了通用的力学模型,利用第一类Lagrange方程建立了系统的动力学方程,为便于约束力的计算,利用局部方法列写约束方程,并以矩阵形式给出了该系统滚阻力偶和摩擦力的广义力.该系统动力学方程是非光滑的,通过建立滚阻定律的互补条件以及光滑铰链约束力的互补条件,给出了具有约束稳定化的基于事件驱动法的数值算法,将非光滑约束力、铰链约束力的求解以及滚轮滑动与粘滞的判断问题统一转化为一个线性互补问题进行求解.对两个算例进行了数值仿真,算例数值结果表明了该方法的可行性和有效性.