Improving Mode II delamination resistance of curved CFRP laminates by a Pre-Hole Z-pinning (PHZ) process

This paper presents an experimental investigation of the Mode II delamination resistance of curved CFRP laminates reinforced with Z-pins. A Pre-Hole Z-pinning (PHZ) process is developed to reduce the in-plane damage of the Z-pinned laminates. The microstructural observation of the Z-pinned laminate specimens indicates that the PHZ process can effectively decrease the defects including the Z-pin offset angle and the area of eyelet zone. The influences of the volume fraction and diameter of Z-pin on the fracture toughness and the delamination crack growth rate of the specimens under End Notch Flexure (ENF) loading are then determined experimentally. The test results show that Z-pin increases the interlayer stiffness of the laminate. The delamination crack growth rate is reduced with the increase of Z-pin diameter and volume fraction, and a reduction up to 40% is achieved compared with the specimens without pins. Furthermore, the Mode II fracture toughness is significantly improved with the increase of Z-pin volume fraction. When Z-pin volume fraction increases by 1%, the achieved fracture toughness is about 200% higher compared to the unpinned laminates.     

SiCO陶瓷隔热复合材料TaSi2-MoSi2硼硅酸盐玻璃涂层制备与性能

为了提高SiCO陶瓷隔热复合材料的抗氧化抗热震性能,通过刷涂法制备SiCO陶瓷隔热复合材料TaSi_2-MoSi_2硼硅酸盐玻璃涂层,借助扫描电镜、X射线衍射等手段对硼硅酸盐玻璃含量分别占23%、31%、38%、41%的涂层进行微观形貌和相组成分析,对不同含量的涂层进行1 500℃氧化5 min,取出后冷却至室温的重复循环试验。结果表明:在循环次数达到25次,氧化总时间达到125 min后,硼硅酸盐玻璃含量占38%的TaSi_2-MoSi_2硼硅酸盐玻璃涂层表面具有最少的孔洞和裂纹,涂层的失重率为-2.1%,说明该涂层具有最好的抗氧化和抗热震性能。。     

表面张力贮箱推进剂管理装置流阻的计算

为了在设计卫星用表面张力贮箱时，正确地计算出推进剂管理装置中液体推进剂的流阻，根据液体的流动特性，研究了卫星用表面张力贮箱推进剂管理装置中推进剂在管道，筛网和一些局部流阻的计算方法，给出了各部分流阻的计算公式，据此实际计算了一个简单的推进剂管理装置，并和实验进行了比较，结果表明理论和实验较为符合。     

应用少量短电阻应变丝布置的损伤评估智能材料结构

智能材料结构是一门新学科，它越来越引起不同学科研究者们的兴趣，本文研究采用电阻应变丝为传感元件，人工神经网络为处理辨识器的损伤评估智能材料结构，提出并实施了一种少量短电阻应变丝的传感元件布置方法，用以对结构中损伤或大应变的区域和级别进行在线评估。     

金属/水反应冲压发动机进水管路的工作特性

基于水与金属燃料反应的水冲压发动机是一种新型的水下动力装置。进水管路是金属/水反应冲压发动机的一个重要部件。为了研究进水管路的工作特性,在理论分析和一维设计的基础上,设计出某一工作状态下的进水管路结构参数,并进行了数值模拟。结果表明,管路中出现汽蚀现象;随着出口压强的增大,总压损失减小,流量系数减小;随着来流速度的增大,总压损失增大,流量系数先增大后减小;随着工作深度的增加,总压损失增大,流量系数增大。     

压缩空气瓶内凝结水水位检测方法的探讨

由于压缩空气瓶在使用过程中会出现瓶内残留凝结水的现象,从而影响压缩空气瓶的容积,并产生化学腐蚀,影响气瓶的整体强度和耐压性能及其的寿命。为此,应掌握气瓶内凝结水水位情况,并且提高检测水位准确度。提出了一种利用气体状态方程来计算压缩空气瓶的冷凝水水位新见解,对压缩空气瓶的安全使用具有重要意义。     

触点接触电阻的动态检测

定时器、继电器等电器靠触点闭合来控制电器系统的电流、电压或定时时间。这时，触点闭合时的接触电阻对电器的电气性能有很大影响，因而触点接触电阻是这类电器的重要技术参数。目前，企业中仍普遍采用手工、静态、抽检法来测量这一参数。这不仅检测效率低，而且与动态使用状况不一致。我们研制了触点电阻动态检测系统，大大提高了检测效率，并使动态检测与使用状态一致，对保证定时器、继电器等的可靠性有重要意义。     

Tolerance of wheat and lettuce plants grown on human mineralized waste to high temperature stress

The main objective of a life support system for space missions is to supply a crew with food, water and oxygen, and to eliminate their wastes. The ultimate goal is to achieve the highest degree of closure of the system using controlled processes offering a high level of reliability and flexibility. Enhancement of closure of a biological life support system (BLSS) that includes plants relies on increased regeneration of plant waste, and utilization of solid and liquid human wastes. Clearly, the robustness of a BLSS subjected to stress will be substantially determined by the robustness of the plant components of the phototrophic unit. The aim of the present work was to estimate the heat resistance of two plants (wheat and lettuce) grown on human wastes. Human exometabolites mineralized by hydrogen peroxide in an electromagnetic field were used to make a nutrient solution for the plants. We looked for a possible increase in the heat tolerance of the wheat plants using changes in photosynthetically active radiation (PAR) intensity during heat stress. At age 15 days, plants were subjected to a rise in air temperature (from 23 ± 1 °C to 44 ± 1 °С) under different PAR intensities for 4 h. The status of the photosynthetic apparatus of the plants was assessed by external СО₂ gas exchange and fluorescence measurements. The increased irradiance of the plants during the high temperature period demonstrated its protective action for both the photosynthetic apparatus of the leaves and subsequent plant growth and development. The productivity of the plants subjected to temperature changes at 250 W m⁻² of PAR did not differ from that of controls, whereas the productivity of the plants subjected to the same heat stress but in darkness was halved.     

谈浐灞半岛迎水面景观建设

随着社会现代化进程的加快,人们对水域空间的景观和休闲娱乐功能的要求也不断提高,论述了浐灞半岛迎水面景观建设的总体需求,要把握的基本原则和景观设计要注意的事项,以期改善水域空间景观,为居民提供安全舒适的休闲娱乐空间,进而提升地区形象,美化地区环境。     

大型弹簧电镀锌工艺优化

采用扫描电镜(SEM)研究了发蓝、超声波酸洗前处理工艺对大型弹簧零件表面残余氧化皮的去除效果以及这两种前处理工艺对镀锌层的结合力与抗腐蚀性能的影响。结果表明,采用适当的发蓝、超声波酸洗等前处理工艺,能够有效去除零件表面顽固的残余氧化皮,较大幅度地提高镀锌层与金属基体的结合力,并提高镀锌层的抗腐蚀性能。