Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

考虑输入饱和与姿态角速度受限的航天器姿态抗退绕控制

 针对航天器姿态控制过程中同时存在输入饱和与姿态角速度受限的问题,提出了一种新型的姿态控制设计方法。该方法在保证系统渐近稳定的前提下,能够显式地给出输入力矩和姿态角速度的最大幅值,并通过引入一个时变锐度参数来增强系统对外部干扰的抑制能力;在此基础上,进一步考虑了由于四元数的冗余性所导致的退绕问题,设计了一组新的姿态偏差函数和偏差向量,使得控制器在满足上述约束的同时还具有抗退绕的优点。仿真结果表明,所提算法能够同时满足输入饱和与姿态角速度受限的约束,并且在较大外部干扰的情况下表现出了很强的鲁棒性,同时成功地规避了退绕现象。该算法为存在多重约束的航天器姿态控制问题提供了一个新的思路和解决方案,具有很好的实际应用价值。     

终端区空中交通流到达模式识别

为了实现对终端区空中交通流到达情况更加准确的分析,针对目前常用的流量统计方法中所存在的问题,提出了交通流到达模式概念,并对基于聚类思想的到达模式识别方法进行了研究。在对交通流到达时序数据提取的基础上,利用基于免疫优化算法的聚类方法实现了对交通流到达模式的识别。对交通流到达模式特征进行了分析,并结合滑动时间窗算法提出了交通高峰小时及峰值流量计算方法。通过实例分析证明了方法的可行性与准确性。     

结构隔绝内-外空间的流-热-固耦合仿真应用

为验证和指导高速飞行器的防隔热设计,准确地模拟气动热产生的热量穿透防隔热材料进而影响舱内温度空间分布和时间变化的过程,研究了一种同时求解机体外流场及气动热、机体结构传热及舱内流场温度场仿真计算方法,其中的传热方式包括热传导、热对流及热辐射。采用两套计算模型、两种求解器、一个数据交换文件的计算结构,构建了一种针对流场-热-结构的多场耦合分析方法,实现了对固体隔绝内外流场温度动态变化问题的仿真分析。最后通过计算实例验证了整套计算方法,得到的飞行器舱内温度变化特性能够用于指导高速飞行器的防隔热设计。     

小展弦比飞翼布局新型嵌入面航向控制特性研究

在小展弦比飞翼布局机翼外侧上/下表面分别设计了一组中等后掠角嵌入面,并对其跨声速时的航向控制效果及其流动机理进行了风洞试验和数值模拟研究。计算和试验结果表明,上嵌入面可在小迎角范围通过轴向力和侧向力的共同作用提供稳定的偏航力矩,实现航向控制;当α6°时,由于嵌入面逐渐处于前缘涡的影响范围内,在前缘涡的吸力作用下,嵌入面航向控制效果迅速下降,直至失效,且进行航向控制时存在不利的滚转耦合;下嵌入面可在全迎角范围内提供稳定的偏航力矩,实现航向控制;通过在小迎角范围内使用上嵌入面,α6°时使用下嵌入面,不仅可在全迎角实现航向控制,且不影响飞机的隐身性能。     

小展弦比飞翼跨声速典型流动特性研究

小展弦比飞翼标模为国内自主设计的融合体飞翼通用研究模型,前缘后掠角为65°,展弦比为1.54。风洞试验结果表明小展弦比飞翼标模在跨声速迎角4°开始出现非线性升力,在迎角12°至16°范围内会出现升力突然下降、俯仰力矩突然上扬的现象。为了分析该现象的机理,通过数值模拟的方法研究了小展弦比飞翼标模在马赫0.9时的流动特性,分析了前缘涡的产生、发展直至破裂的整个过程,结果表明:小展弦比飞翼标模在迎角4°开始出现涡升力;随着迎角增加,前缘涡逐渐向内侧移动,涡强和背风面激波的强度也逐渐增加,前缘涡与激波发生交叉干扰并达到一个平衡流态;当前缘涡与激波无法维持既有平衡时则会发生涡破裂,流场急剧变化以达到新的平衡,从而导致升力突然下降并产生抬头力矩增量。     

采用排间界面静压约束伴随方法的多级压气机叶片优化

为解决伴随优化应用在多级压气机中出现的优化工况点漂移问题,在前期薄层N-S方程伴随方法基础上,对目标函数——出口熵增不仅施以质量流量、总压比约束,还添加排间界面静压展向分布作为新的约束条件.以某5级压气机为对象,对其中第1级转、静叶分别在首1.5级和全5级压气机环境下进行了优化.结果表明,施加排间界面静压展向分布约束能够显著解决优化工作点漂移问题,优化后5级压气机的效率提高0.4个百分点.      

向心涡轮进气结构的气动性能及损失机理

针对某向心涡轮,采用二维流动分析方法设计矩形截面蜗壳,同时采用商用计算流体动力学软件CFX对带蜗壳的向心涡轮流动损失进行数值计算.将计算结果与原型设计中带有集气室的向心涡轮计算结果进行对比.结果表明:蜗壳内流动损失要小于集气室内的流动损失,向心涡轮采用蜗壳后流道内流场有明显改善,效率有所提高.采用设计的矩形截面蜗壳,向心涡轮的功率提高1.7%.通过内部流场的分析,揭示了内部流场结构和损失机理,为向心涡轮的设计和优化提供了一定的参考.      

超高负荷涡轮叶栅叶顶间隙流动特征及间隙高度的影响

采用数值模拟方法研究了超高负荷涡轮叶栅叶顶间隙流动特征,详细分析了泄漏涡、叶顶分离涡、上通道涡等的流动细节,在此基础上分析间隙高度对流场特征和叶片负荷的影响.结果表明:超高负荷涡轮叶栅叶顶间隙区域存在多种形式的流动分离,泄漏流非常强烈,不仅直接影响上通道涡的形成与发展,使通道涡整体向叶根移动,而且部分泄漏流进入下通道涡;随着间隙高度增加,叶顶分离涡和泄漏涡均明显增强,叶片负荷尤其是叶顶负荷有所降低.