专用瞄准设备自动检定系统

介绍了专用瞄准设备自动检定系统的系统配置、工作原理及软件设计，并对系统的测量不确定度进行了分析和评定。     

An Investigation into Vertical Bias Effects

ABSTRACT

In three experiments, after exploring a virtual environment (VE), adult participants made spatial judgments about the location of target objects that were higher and lower than their perceived test location within the VE. In Experiment 1, the locations of the target objects were inferred from verbal instructions. The main results were a tendency to judge objects as closer to the horizontal plane than their true locations, and more efficient downward than upward judgments. Both effects generally accord with findings reported by Wilson et al. (2004a Wilson, P. N., Foreman, N., Stanton, D. and Duffy, H. 2004a. Memory for targets in a multilevel simulated environment: Evidence for vertical asymmetry in spatial memory. Memory & Cognition, 32: 283–297. [Crossref] , [Google Scholar], 2004b Wilson, P. N., Foreman, N., Stanton, D. and Duffy, H. 2004b. Memory for targets in a multi-level simulated-environment: A comparison between able-bodied and physically disabled children. British Journal of Psychology, 95: 325–338.  [Google Scholar]). In Experiments 2 and 3, which were closely modeled on the design of the Wilson et al. studies, regression to the horizontal plane was noted but no downward bias was observed. A misperception in the viewing height between the floors and ceilings of the virtual rooms was apparent in both experiments. The results from the present study together with earlier investigations suggest different hierarchical encoding of between-axis and within-axis information.     

大型回流边界层风洞的气动与结构设计

大型边界层风洞是开展风工程研究的必备装备。以浙江大学ZD-1边界层风洞的研制为背景,详细介绍了大型回流边界层风洞气动设计和立式结构设计中的关键问题,在风洞气动设计时采用了收缩比为4∶1的单回路单试验段气动轮廓,在试验段中设置了0．22°的当量扩散角,对拐角导流片外形作了特殊处理,并采用钢结构与混凝土结构相结合的立式结构。流场校验结果表明,大型回流边界层风洞的气动与结构设计能满足设计要求,某些指标甚至达到航空风洞的标准,在试验段中设置扩散角有利于降低轴向静压梯度,立式结构设计对提高试验段气流的水平均匀性有一定的作用,可为今后类似风洞的研制提供参考。     

高垂直度和低沉积的MEMS陀螺梳齿结构释放工艺

梳齿型微机电系统（MEMS）陀螺的释放要求结构具有垂直度高、释放过程沉积聚合物少的特点,通过优化深硅刻蚀的工艺参数,包括钝化气体八氟环丁烷（C4F8）的流量、衬底温度、刻蚀气体六氟化硫（SF6）的流量和钝化气体C4F8的压力,实现了结构垂直度为90.0°、支撑层表面沉积物厚度为87.1nm的梳齿结构释放工艺。深硅刻蚀工艺的优化为高性能MEMS陀螺的加工提供了基础。     

A comparative study of ionospheric IRIEup and ISP assimilative models during some intense and severe geomagnetic storms

Three-dimensional (3-D) electron density matrices, computed in the Mediterranean area by the IRI climatological model and IRIEup and ISP nowcasting models, during some intense and severe geomagnetic-ionospheric storms, were ingested by the ray tracing software tool IONORT, to synthesize quasi-vertical ionograms. IRIEup model was run in different operational modes: (1) assimilating validated autoscaled electron density profiles only from a limited area which, in our case, is the Mediterranean sector (IRIEup_re(V) mode); (2) assimilating electron density profiles from a larger region including several stations spread across Europe: (a) without taking care of validating the autoscaled data in the assimilation process (IRIEup(NV)); (b) validating carefully the autoscaled electron density profiles before their assimilation (IRIEup(V)).The comparative analysis was carried out comparing IRI, IRIEup_re(V), ISP, IRIEup(NV), and IRIEup(V) foF2 synthesized values, with corresponding foF2 measurements autoscaled by ARTIST, and then validated, at the truth sites of Roquetes (40.80°N, 0.50°E, Spain), San Vito (40.60°N, 17.80°E, Italy), Athens (38.00°N, 23.50°E, Greece), and Nicosia, (35.03°N, 33.16°E, Cyprus). The outcomes demonstrate that: (1) IRIEup_re(V), performs better than ISP in the western Mediterranean (around Roquetes); (2) ISP performs slightly better than IRIEup_re(V) in the central part of Mediterranean (around Athens and San Vito); (3) ISP performance is better than the IRIEup_re(V) one in the eastern Mediterranean (around Nicosia); (4) IRIEup(NV) performance is worse than the IRIEup(V) one; (5) in the central Mediterranean area, IRIEup(V) performance is better than the IRIEup_re(V) one, and it is practically the same for the western and eastern sectors.Concerning the overall performance, nowcasting models proved to be considerably more reliable than the climatological IRI model to represent the ionosphere behaviour during geomagnetic-ionospheric storm conditions; ISP and IRIEup(V) provided the best performance, but neither of them has clearly prevailed over the other one.     

基于 Kriging与多点取样算法的压气机特性建模

针对航空燃气轮机流量系数插值建模过程中,获取样本数据时的实验成本较高以及插值模型精度偏低这 2个问题,根据样本点在设计空间中的分布与模型精度的关系,在 Kriging插值模型的基础上,采用把垂距作为设计变量取值标准的取样算法。首先,将样本点与相邻 2点之间连线的垂距与垂距阈值进行比较,筛选出符合条件的数据点,形成候选点集;其次,选用高斯函数判定基础点集和候选点集的相关性;最后,使用该算法筛选后的样本点构建 Kriging插值模型。实验结果表明,该方法使用的样本点为原来数量的 70%左右,并且预测精度得到了提高,该方法是有效可行的。     

三轴承矢量喷管红外辐射特性

针对涡扇发动机用三轴承矢量喷管（3BSN）,通过数值模拟的方法研究了在巡航和垂直起降（VTOL）状态即非矢量和90°矢量状态下三轴承矢量喷管的红外辐射空间分布特征,并分析了其影响机理。结果表明,在非矢量状态下由于特殊的几何型面使得喷管下壁面出现了局部高温区,喷流形状也变成椭圆锥形,造成垂直探测面上正探测角壁面红外辐射较负探测角最大增加44.6%,水平探测面上的燃气红外辐射大于垂直探测面;90°矢量状态下,由于偏转的喷管结构对前端高温部件的遮挡,总辐射峰值仅为非矢量状态的43.3%;喷管90°矢量偏转使得远离曲率中心一侧的气流速度降低温度升高,喷管外侧出现了大范围的局部高温区,导致垂直探测面负探测角范围的壁面辐射大于正探测角范围,最大相对差值达到71.9%。喷管偏转也遮挡了部分喷管内部的高温燃气,垂直探测面负探测角的仅能覆盖喷管出口处的高温燃气区域,明显小于正探测角,造成燃气辐射出现了20%的最大相对差值。     

垂直发射的反舰导弹控制系统设计

首先对某新型垂直发射的反舰导弹建立弹体运动的数学模型,然后使用最优控制结合经典 PID 控制的方法来设计控制器。该控制方案没用复杂的控制技术,在工程上易于实现。最后,仿真结果显示了该设计方法的有效性。     

利用视加速度补偿和推力逐级释放的垂直着陆制导方法

针对运载火箭子级垂直返回着陆段的制导问题,本文在应用凸优化的滚动时域在线规划基础上研究了制导鲁棒性的改善策略。为应对着陆后期控制能力不足的情况,在滚动规划过程中引入了推力上界逐级释放的策略。同时,考虑缓解干扰和误差累积的影响,在制导周期内引入视加速度信息对在线规划的推力指令进行补偿,以进一步改善滚动规划的递归可行性。最后,通过数值算例仿真及对比分析验证所提出的补偿策略的有效性。     

基于SIP的Ka频段高集成度有源相控阵天线设计

卫星有效载荷系统逐渐开始采用相控阵天线作为收发装置,由于卫星的体积和重量受限,星载相控阵天线必须朝小型化、轻量化方向发展。传统砖块式架构的ka频段64元相控阵天线的剖面高度约60~80mm,重量约2kg。近年来,研究人员从设计、工艺和加工等不同方向探索和研究了瓦片式的相控阵天线,期望能从设计和加工方法上减小相控阵天线体积和重量,从设计方法入手,研究了一种基于系统集成封装技术的有源相控阵天线,该天线的辐射单元材料采用微带介质板,相较于其它形式的辐射单元具有更低的剖面高度,微波射频电路被封装到低温共烧陶瓷基板内部,射频走线与辐射单元平行布局,通过高集成化设计将微波电路和天线辐射单元进行一体化组装,与传统砖块式架构的相控阵天线相比,在具有相同辐射口径的前提下,设计的天线剖面高度缩减到30mm,重量减小到1kg,工作在Ka频段,波束扫描宽度达到±60°。满足了减小相控阵天线体积和重量的要求。