气相沉积技术在产品中的应用及发展

以某系列产品中端面齿盘采用离子镀加工为例,重点介绍了气相沉积技术中的真空离子镀技术在产品上的应用过程,并以此为基础,阐述了气相沉积技术在航空产品生产中的应用前景.     

Signatures of the Sudden Stratospheric Warming events of January–February 2008 in Seoul,S. Korea

The period January–February 2008 was characterized by four Sudden Stratospheric Warmings (SSWs) in the Northern Hemisphere, of which the last warming, at the end of February 2008, was a major warming. A significant decrease in mesospheric water vapour (H₂O) of more than 2 ppmv (∼40%) was observed by the ground-based microwave (GBMW) radiometer in Seoul, S. Korea [37.3°N, 126.3°E] during the major SSW. A comparison with ground-based mesospheric H₂O observations from the mid-latitude station in Bern [46.9°N, 7°E] revealed an anticorrelation in the mesospheric H₂O data during the major SSW. In addition, prior to the major warming, strong periodic fluctuations were recorded in the Aura MLS vertical temperature distribution between 15 and 0.05 hPa at Seoul. The mesospheric temperature oscillation was found to have a period of ∼10–14 days with a persistency of 3–4 cycles.     

The impact of microwave absorber and radome geometries on GNSS measurements of station coordinates and atmospheric water vapour

We have used microwave absorbing material in different geometries around ground-based Global Navigation Satellite System (GNSS) antennas in order to mitigate multipath effects on the estimates of station coordinates and atmospheric water vapour. The influence of a hemispheric radome – of the same type as in the Swedish GPS network SWEPOS – was also investigated. Two GNSS stations at the Onsala Space Observatory were used forming a 12 m baseline. GPS data from October 2008 to November 2009 were analyzed by the GIPSY/OASIS II software using the Precise Point Positioning (PPP) processing strategy for five different elevation cutoff angles from 5° to 25°. We found that the use of the absorbing material decreases the offset in the estimated vertical component of the baseline from ∼27 mm to ∼4 mm when the elevation cutoff angle varies from 5° to 20°. The horizontal components are much less affected. The corresponding offset in the estimates of the atmospheric Integrated Water Vapour (IWV) decreases from ∼1.6 kg/m² to ∼0.3 kg/m². Changes less than 5 mm in the offsets in the vertical component of the baseline are seen for all five elevation cutoff angle solutions when the antenna was covered by a hemispheric radome. Using the radome affects the IWV estimates less than 0.4 kg/m² for all different solutions. IWV comparisons between a Water Vapour Radiometer (WVR) and the GPS data give consistent results.     

Development of a GNSS water vapour tomography system using algebraic reconstruction techniques

A GNSS water vapour tomography system developed to reconstruct spatially resolved humidity fields in the troposphere is described. The tomography system was designed to process the slant path delays of about 270 German GNSS stations in near real-time with a temporal resolution of 30 min, a horizontal resolution of 40 km and a vertical resolution of 500 m or better. After a short introduction to the GPS slant delay processing the framework of the GNSS tomography is described in detail. Different implementations of the iterative algebraic reconstruction techniques (ART) used to invert the linear inverse problem are discussed. It was found that the multiplicative techniques (MART) provide the best results with least processing time, i.e., a tomographic reconstruction of about 26,000 slant delays on a 8280 cell grid can be obtained in less than 10 min. Different iterative reconstruction techniques are compared with respect to their convergence behaviour and some numerical parameters. The inversion can be considerably stabilized by using additional non-GNSS observations and implementing various constraints. Different strategies for initialising the tomography and utilizing extra information are discussed. At last an example of a reconstructed field of the wet refractivity is presented and compared to the corresponding distribution of the integrated water vapour, an analysis of a numerical weather model (COSMO-DE) and some radiosonde profiles.     

GPS sensing of precipitable water vapour during the March 2010 Melbourne storm

The March 2010 Melbourne storm is used as a case study to examine the potential of using Global Positioning System (GPS) observations for studying the precipitable water vapour (PWV) field. The Victorian statewide GPS infrastructure network, i.e. GPSnet, was used in this study. GPSnet is currently the only statewide and densest GPS infrastructure network in Australia, which provides an excellent opportunity to examine the distribution of water vapour as the severe weather system passed over the state. Data from 15 GPSnet stations were processed over a one-week period, i.e. a few days prior to and after the storm passage, during which the course of the storm extended from the west to the southeast corner of the state. In addition, data from two radiosonde sites of the Australian Bureau of Meteorology Upper Air Network were used to compare and validate the GPS derived PWV measurements. The findings demonstrate that there is strong spatial and temporal correlation between variations of the ground-based GPS-PWV estimates and the passage of the storm over the state. This is encouraging as the ground-based GPS water vapour sensing technique can be considered as a supplemental meteorological sensor in studying severe weather events. The advantage of using ground-based GPS-PWV technique is that it is capable of providing continuous observation of the storm passage with high temporal resolution. The spatial resolution of the distribution of water vapour is dependent on the geographical location and density of the GPS stations.     

Global water vapour distribution in the upper troposphere and lower stratosphere during CRISTA 2

Water vapour measurements during the second mission of the CRyogenic Infrared Spectrometers and Telescopes for the Atmosphere (CRISTA) instrument are presented in the altitude regime 8–20 km. Mixing ratios are shown on isentropic surfaces (300–500 K) as global zonal means and as averages in 60° longitude sectors. Transports are indicated to occur preferentially on isentropic surfaces in the northern hemisphere, but not in the tropics and in the south. The hygropause is found shifted away from the equator towards the winter hemisphere. The amount of shift is longitude dependent and can be as great as 20–30°. The water content of the hygropause area shows considerable zonal asymmetries.     

引射碎流型蒸汽加热器研究

本文在文[1]的基础上,通过深入的理论分析和实验研究,提出一种比射流碎流型更好的加热器结构——引射碎流型加热器。经现场使用证明,这种新型的蒸汽加热器能更有效地达到降噪,减振和提高热效率的效果。     

等离子-物理气相沉积硅/莫来石/硅酸镱环境障涂层的高温防护和耐热冲击性能研究

通过SiCf/SiC复合材料表面等离子喷涂(APS)硅黏结层和莫来石中间层,等离子-物理气相沉积(PS-PVD)制备硅酸镱面层,喷涂的整个环境障涂层体系组织致密,PS-PVD工艺制备的硅酸镱为层状结构,孔隙率＜1％.研究了 SiCf/SiC复合材料环境障涂层的抗静态氧化、循环氧化、水汽腐蚀和热冲击性能,发现复合材料表面...     

Estimation of precipitable water vapour from GPS measurements in Argentina: Validation and qualitative analysis of results

This paper presents PWV estimates from GPS data computed at four continuously operated GPS stations in Argentina established at Buenos Aires, Córdoba, Rosario and Salta over a 1 year period (2006–2007). The objective is to analyze the behaviour of the GPS PWV estimation using mean tropospheric temperature (_Tm$T_m$) values from the Bevis model, Sapucci model and obtained by a numerical integration of variables provided by the operational analysis of the National Centre of Environmental Prediction (NCEP). The results are validated using PWV values from nearest radio soundings. Moreover, a comparison between PWV values determined from microwave sensors deployed on the NOAA-18 satellite and PWV from GPS observations is also presented.     

定向渗积快速制备C/C复合材料力学性能的研究

以天然气作为气源采用自行研发的C/C复合材料快速制备新技术制备C/C复合材料样件,测试分析了新工艺制备C/C复合材料的力学性能,并与以丙烯为炭源气采用传统等温等压CVI工艺制备C/C复合材料的力学性能进行了对比。研究结果表明:相比于传统工艺,采用新工艺制备C/C复合材料的拉伸强度和模量分别提高了12.0%和20.1%;垂直弯曲强度和模量分别提高了11.7%和12.4%。