Effect of baffle injectors on the first-order tangential acoustic mode in a cylindrical combustor

Combustion instability is a very important issue in the development of the propulsion systems used in aerospace. It is very important to associate the high frequency combustion instabilities with the acoustic characteristics of the combustion chamber. In this paper, the effects of various baffle injectors which were installed on the injector faceplate on the first-order tangential acoustic mode were investigated theoretically and experimentally. The effects of the gap between adjacent injectors on the first-order tangential acoustic mode in a cylindrical chamber were considered. The acoustic admittance of the injectors was derived. The results showed that the amplitude and frequency of the first-order tangential acoustic mode increase with the increase in the gap between adjacent injectors, but decrease with the increase in the number and height of the baffles. The baffle injectors have a greater influence on the amplitude and frequency of the first-order tangential acoustic mode than the baffle blades.     

旋转爆轰波与涡轮平面叶栅相互作用数值模拟

由于旋转爆轰燃烧室具有自增压特性，可提高热力循环效率，因此将旋转爆轰燃烧室应用于燃气轮机可进一步提高系统的性能。基于非稳态雷诺时均Navier-Stokes方法，采用剪切应力输运k-ω湍流模型，建立旋转爆轰燃烧室与涡轮平面叶栅耦合计算模型，研究旋转爆轰燃烧室内的复杂波系与涡轮叶片的相互作用，分析涡轮叶栅对高频爆轰压力振荡的抑制作用。结果表明：旋转爆轰燃烧室内的燃气在涡轮叶栅内加速，并且在斜激波后的局部区域马赫数的增加更为明显。斜激波与涡轮静转子叶片的前缘、压力面、吸力面以及尾缘相互作用，由于旋转爆轰波不同的传播方向，使得斜激波与静子叶片呈相互垂直或平行，进而形成两种不同的波系结构。涡轮叶栅对高频压力振荡存在明显的抑制作用，涡轮叶栅上下游高频压力振荡幅值的衰减率达到80%以上。研究结果展示了旋转爆轰波作用下涡轮叶栅内复杂波系结构特征，并对基于爆轰燃烧推进技术的应用提供了一定的理论基础。     

Mixing and combustion characteristics in a scramjet combustor with different distances between cavity and backward-facing step

The mixing and combustion characteristics in a cavity flameholding combustor under inlet Mach number 2.92 are numerically investigated with ethylene injection. Dimensionless distance is defined as the ratio of the actual distance to the height of the combustor entrance. The cavity shear-layer mode, the lifted cavity shear-layer mode, and jet wake mode with upstream separation are observed respectively with dimensionless distance equals to 1.5, 4.5, and 7.5. In both non-reacting and reacting flow...     

陶瓷基复合材料旋转爆震燃烧室壁面冷却研究

为了降低旋转爆震发动机燃烧室壁面温度，设计了陶瓷基复合材料燃烧室主动冷却结构。对燃烧室主动冷却结构的传热特性进行数值模拟，获得主动冷却燃烧室壁面温度响应和温度分布规律。对燃烧室主动冷却结构进行了模型简化，将模拟旋转爆震波获得的不同壁面温度下的热流密度参数加载在冷却模型上，提高了壁面温度模拟的计算效率。结果表明：燃烧室内壁面热流密度随着壁面温度的升高而降低，扩散区的平均热流密度最大；陶瓷基复合材料燃烧室主动冷却结构可以有效降低燃烧室壁面温度，在相同冷却流量下，矩形冷却截面的冷却效果优于圆形冷却截面，可以将燃烧室壁面的温度降到1 200 K以下；燃烧室壁面最高温度在燃烧室中段区域。