Aerodynamic characteristics of store during lateral jet assisted separation from cavity using free drop technique

Aimed at the problem of store separation from internal cavity, this paper innovatively puts forward a separation scheme of using lateral jet to assist store safe separation. The jet ensures that the store is continuously subjected to down head moment during separation, so as to ensure safe separation. The wind tunnel free drop test technique with lateral jet is established, which can ensure that there is no support interference in the motion process of the store and more truly simulate the motio...     

Experimental study on dynamic behavior of mechanically pumped two-phase loop with a novel accumulator in simulated space environment

Mechanically pumped two-phase loop (MPTL) which is a prominent two-phase heat transfer technology presents a promising prospect in thermal control for space payload. However, transient behavior of MPTL caused by phase-change and heat sources load-on/off in simulated space environment is rarely reported. In the present study, one MPTL setup was designed and constructed, and experimentally studied. Particularly, a novel two-phase thermally-controlled accumulator integrated with passive cooling measure and three capillary structures was designed as the temperature-control device. Dynamic behavior of the start-up, temperature control, and temperature adjustment were monitored; meanwhile, thermodynamic behavior within the proposed accumulator, the operating behavior as well as the heat and mass transfer behavior between the main loop and the accumulator were revealed. The results show that the fluid management function of the capillary structures for the novel accumulator is verified. The working point of the MPTL system can be adjusted by changing the temperature control point of the accumulator and it is little influenced by external heat flux and heat sources on/off. Pressure-drop oscillations which are manifested as fluctuations of temperature and pressure can be observed after phase changing due to the compressible volume within the accumulator and the negative-slope portion of the internal pressure.     

变角度铺丝构件内嵌缺陷精确定位算法

采用自动纤维铺放技术生产变角度铺丝构件时,在通过平移参考路径方法获得完整铺层过程中剪丝操作将导致构件中产生间隙、重叠形式的内嵌缺陷。将参考路径设计为更具通用性和设计自由度的B样条曲线。针对开边柱面铺丝构件,通过延长参考路径、丝束等距、丝带平移、丝束剪断、缺陷定位步骤,提出了不同剪断策略下的内嵌缺陷精确定位算法,该算法适用于任意覆盖参数。最后开发了相应Matlab程序验证算法的有效性,并可视化铺丝构件中内嵌缺陷的分布情况。结果表明算法可以精确确定不同覆盖参数下内嵌缺陷的位置,可为后续有限元精细模型建立提供理论依据。