弹簧杆校正原理及其在力矩控制系统中的应用

 为了掌握自动飞行器的工作特性,在它飞上空中之前,工程技术人员要在地面进行各种仿真试验。研制力矩控制系统的目的在于模拟随高度、速度变化且连续作用在飞行器翼面上的气动铰链力矩。这种装置广泛应用于各种型号舵机。 我们研制的力矩控制系统力案如图1所示。     

武汉地区电离层TEC和NmF2及板厚的季节变化

通过利用武汉电离层观测站(114.4°E,30.6°N)1980-1990年对E8T-Ⅱ卫星信标的法拉第旋转测量的TEC(电子浓度总含量)数据,以及由测高仪测量的1980-1990年间的f0F2(F2层临界频率)数据,研究了武汉地区TEC,NmF2(最大电子浓度)和板厚的季节变化,同时比较了IRI和武汉单站模式在预测NmF2季节性方面的有效性.武汉单站模式在预测NmF2季节性变化方面优于IRI模式.      

EB-PVD制备箔材的厚度均匀性研究

从真空蒸镀中使用的小平面蒸发源理论出发,针对电子束物理气相沉积中为改善箔材厚度分布所须旋转大基板进行蒸镀的情况,建立了该过程的数学模型;并利用该模型对不同的坩埚位置所沉积的箔材厚度进行了定性分析,从而实现了对坩埚与基板相对位置的优化,使基板上沉积的箔材厚度分布可以达到最均匀的状态.最后通过K值的提出使理论和实际箔材厚度的结果趋于一致,即证明所建立的数学模型是合理的.     

空间目标快速轮廓特征提取与跟踪技术

为满足空间目标交会对接任务中高精度、快速的测量要求,提出了一种空间目标快速轮廓特征提取与跟踪技术。该算法首先从初始帧图像中分割定位目标所在局部区域,作为目标连续跟踪的初始值;其次基于初始帧目标局部区域完成对初始帧目标边缘特征的检测及细化处理;最后采用Hough变换完成对初始帧目标边缘的检测及细化后的局部图像轮廓直线的提取,分别选取目标轮廓四方向最优的直线参数作为最终目标轮廓直线获取的效果,并采用梯度最大法则实现两两求交获取的轮廓特征的优化提取。在目标逼近过程中,结合相邻帧图像间目标尺度动态变化的关联性,根据初始帧提取目标轮廓特征的先验信息,确定目标在第二帧图像中的轮廓位置,并依次根据上一帧图像的轮廓位置信息定位目标在当前帧所在的区域,通过局部处理实现序列图像轮廓区域特征的连续跟踪。该算法无需遍历整个图像,所需处理的目标区域大幅减小,能够有效克服由目标图像较多边缘干扰导致的轮廓提取效果差及处理速度慢的缺点,具有速度快、准确性强、稳定性高等优点。     

一种基于信号模型的ATE仪器资源配置方法

讨论了一种基于面向对象的信号模型构造方法在自动测试系统(ATE)测试环节中的应用,以解决测试资源有限和配置自动化的问题,并给出了一种由所需信号自动获取其资源信息的实现方法.通过分析测试资源与生成信号之间的关系,提出了由已知信号逐步递推获取资源信息的方法,并从理论上探讨了该方法的实现过程.提出了以生成信号的仪器资源信息和继承优先级为指标,从生成成本和生成层次上考察建立信号通道的思路.      

考虑刀具偏心的微铣削加工表面粗糙度预测模型研究

基于微铣削刀具轨迹建立了考虑刀具偏心、最小切削厚度的塑性材料微铣削底面粗糙度的预测模型,预测结果表明粗糙度表面形貌呈锯齿状,刀具偏心会影响表面粗糙度的形貌周期和高度,并进行微铣削加工实验,对粗糙度预测模型进行了验证。采用回归统计方法,建立了脆性材料微铣削加工表面粗糙度预测模型,对加工表面形貌进行观察,利用响应曲面法得到了各铣削用量对表面粗糙度的影响规律。     

Inertial parameter estimation and control of non-cooperative target with unilateral contact constraint

In this paper, the relative sliding motion between the target and the manipulator’s end-effector is considered and characterized as a unilateral contact constraint. A new possible solution is presented to estimate the inertial parameters of a non-cooperative target while the relative sliding motion exists. First, the detailed analysis of the dynamical model is presented, and a parameter-explicit linear time-varying model is obtained. Then, an extended state observer is constructed based on the new model, which can effectively estimate the unknown inertial parameters of the target when relative sliding motion exists. As the modified reactionless controller requires the knowledge of inertial parameters, a hybrid post-capture control scheme is also established based on the switch law between different controllers. The correctness and efficiency of the proposed algorithm are validated by numerical simulation, which proves a potential framework for the non-cooperative target post-capture operation.     

Framework and development of data-driven physics based model with application in dimensional accuracy prediction in pocket milling

In the manufacturing of thin wall components for aerospace industry, apart from the side wall contour error, the Remaining Bottom Thickness Error (RBTE) for the thin-wall pocket component (e.g. rocket shell) is of the same importance but overlooked in current research. If the RBTE reduces by 30%, the weight reduction of the entire component will reach up to tens of kilograms while improving the dynamic balance performance of the large component. Current RBTE control requires the off-process measurement of limited discrete points on the component bottom to provide the reference value for compensation. This leads to incompleteness in the remaining bottom thickness control and redundant measurement in manufacturing. In this paper, the framework of data-driven physics based model is proposed and developed for the real-time prediction of critical quality for large components, which enables accurate prediction and compensation of RBTE value for the thin wall components. The physics based model considers the primary root cause, in terms of tool deflection and clamping stiffness induced Axial Material Removal Thickness (AMRT) variation, for the RBTE formation. And to incorporate the dynamic and inherent coupling of the complicated manufacturing system, the multi-feature fusion and machine learning algorithm, i.e. kernel Principal Component Analysis (kPCA) and kernel Support Vector Regression (kSVR), are incorporated with the physics based model. Therefore, the proposed data-driven physics based model combines both process mechanism and the system disturbance to achieve better prediction accuracy. The final verification experiment is implemented to validate the effectiveness of the proposed method for dimensional accuracy prediction in pocket milling, and the prediction accuracy of AMRT achieves 0.014 mm and 0.019 mm for straight and corner milling, respectively.     

影响胶粘剂剪切强度因素的探讨

分析了在胶粘剂剪切强度检测过程中,胶接材料表面处理方法、胶层的厚度、测试时加的垫片厚度和试样的夹距距离、涂胶时的晾置时间等因素对检测结果影响。研究结果表明,上述因素不仅直接影响了胶粘剂粘接强度的大小,而且关系到胶粘剂剪切强度检测试验的测试结果。     

基于视频数据的机场跑道外来物检测

提出了一种基于视频数据的机场跑道外来物(FOD,Foreign Object Debris)检测算法,该算法包括几何校正、背景差分、杂波抑制和伪装消除等4个步骤.其中,几何校正排除了摄像头轻微抖动造成的图像差异;背景差分利用每个像素对应的颜色向量信息,建立背景模型并进行定时更新;杂波抑制和伪装消除利用差分图像和原始图像信息,建立马尔科夫随机场和概率统计模型,在降低虚警的同时提高了检测率.将本算法应用于两组不同光照条件下获取的视频图像,检测不同形状和颜色的FOD目标;采用本算法对机场实测数据进行测试,验证了算法的有效性.