Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

电动式磁悬浮动量球电磁场耦合分析

本文针对电动式磁悬浮动量球(Electrodynamic suspension reaction sphere, EDSRS)的电磁场耦合进行分析，采用定子绕组的感应电动势评判耦合强度，提出了耦合强度评判指标，作为EDSRS的结构设计约束，以降低电磁场耦合的影响。首先，结合EDSRS的具体结构特点，对多定子之间的电磁场耦合问题进行分析，采用定子电磁场在另一个定子绕组中产生的感应电动势评判耦合强度。然后，对感应电动势产生规律进行分析，提出了耦合强度评判指标，并基于所提评判指标，建立了耦合约束验证流程，作为EDSRS的结构设计约束，最后，通过有限元仿真和实验验证了上述电磁场耦合分析。     

全模颤振双索悬挂系统刚体模态频率研究

研究绳系结构和绳索预紧力对全模颤振双索悬挂系统刚体模态频率的影响。首先，基于绳索并联机构理论，对双索悬挂系统进行静力学建模，引入加权矩阵，推导了双索悬挂系统静刚度模型；其次，建立双索悬挂系统无阻尼振荡方程，分析双索悬挂系统刚体模态频率变化规律；进而，搭建了双索悬挂系统地面样机，开展系统模态频率测试试验，研究系统刚体模态频率的影响因素及其变化规律；最后，参考试验结果修正所建数学模型。结果表明，随着绳索预紧力的增加，系统刚体模态频率呈上升趋势，但各阶刚体模态的固有频率上升速率不同，平动模态的固有频率受绳索预紧力影响比转动模态小得多；在转动模态方面，滚转模态的固有频率最大且上升快；在平动模态方面，升沉模态的固有频率大于横侧滑模态的固有频率；双索经过的机身前后滑轮与飞机模型质心之间的相对位置变化会不同程度地影响支撑系统俯仰模态、偏航模态的固有频率，但几乎不影响其滚转模态的固有频率。研究发现，通过控制悬挂绳索预紧力的大小，合理设计机身上的滑轮安装位置，能够有效降低双索悬挂系统刚体模态频率。研究结果对于优化设计全模颤振双索悬挂系统具有指导意义。     

实用化光力加速度计中单微球重复起支技术

针对光力加速度计的小型化应用,设计并制作了一种基于V型槽的片上光纤光阱,并采用机械振动方法实现了单微球重复起支。理论研究了利用机械振动方法实现微球起支、捕获的动力学过程。结果表明,只有当微球脱离捕获室底面的初始速度满足一定范围时才能稳定捕获,该初始速度范围与捕获室的几何参数有关。提出了利用两光纤中相向传播光的耦合功率监测微球捕获状态的方法,并通过实验完成了微球起支过程的自动控制,实现了单微球的重复起支与捕获。该片上光纤光阱制备方法和单微球重复起支技术可推动光力加速度计的实用化进程。     

高超声速风洞流场非均匀性对气动力试验影响研究

高超声速风洞流场品质是气动力试验主要误差的决定因素,常规高超声速风洞流场均匀性虽然满足国军标GJB4399-2002《高超声速风洞气动力试验方法》对风洞流场品质的要求,但其风洞流场严格意义上说是“非均匀”的,这种流场非均匀性会对模型气动力特性存在不同程度的影响。为此,在CARDC常规高超声速风洞中开展了某升力体模型和某通气模型“多位置试验”,验证了风洞流场的非均匀性对飞行器气动力(特别是力矩特性)试验结果有显著影响,这种影响量已远超过常规的风洞重复性试验误差,甚至大于国内现有的在AIAA-S071A-1999标准上建立的不确定度评估方法所获取的“不确定度”。     

用于风洞实验的磁悬挂技术研究

30mm×30mm五分力磁悬挂天平由电磁铁组、电磁感应式位置传感器、磁悬挂控制器、气动力测量系统等部分构成。在80m/s低速风洞中进行了吹风试验的主要结果,包括电磁铁设计理论与结构形状、传感器工作原理与数学模型、控制补偿律和工程实现中的一些技术问题。     

航空结构件铣削变形及其控制研究进展

随着机床加工性能和刀具切削性能的提升,航空结构件的高效高精加工成为可能.航空结构件薄壁加工特征多,在铣削过程中易发生变形,因此预测与控制航空结构件的加工变形是切削加工领域内亟待解决的难题.通过总结了航空结构件的特点及加工难点,对加工变形形成机理进行深入分析;对加工变形影响最为关键的铣削力模型进行归纳;阐述了航空结构件残...     

尺度效应下大功率伺服电机再生冷却通道超临界态甲烷传热特性研究

针对飞行器电动执行机构的大功率伺服电机强化散热问题,建立了不同尺度的电机缠绕式螺旋管再生冷却通道数值模型,对超临界态甲烷在尺度效应影响下的传热特性和机理进行研究,探讨了不同尺度冷却通道中超临界态甲烷所受重力浮升力和离心浮升力对传热性能的影响.结果表明,离心浮升力及重力浮升力均受到超临界态甲烷热物性剧烈变化的影响;在相同...     

A multi-order method for predicting stability of a multi-delay milling system considering helix angle and run-out effects

In this paper, a multi-delay milling system considering helix angle and run-out effects is firstly established. An exponential cutting force model is used to model the interaction between a work-piece and a cutting tool, and a new approach is presented for accurately calibrating exponential cutting force coefficients and cutter run-out parameters. Furthermore, based on an implicit multi-step Adams formula and an improved precise time-integration algorithm, a novel stability prediction method is proposed to predict the stability of the system. The involved time delay term and periodic coefficient term are integrated as a comprehensive state term in the integral response which is approximated by the Adams formula. Then, a Floquet transition matrix with an arbitrary-order form is constructed by using a series of matrix multiplication, and the stability of the system is determined by the Floquet theory. Compared to classical semi-discretization methods and full-discretization methods, the developed method shows a good performance in convergence, efficiency, accuracy, and multi-order complexity. A series of cutting tests is further carried out to validate the practicability and effectiveness of the proposed method. The results show that the calibration process needs a time of less than 5 min, and the stability prediction method is effective.