冲击响应谱（SRS）分析数字化方法探讨

本文介绍了求单自由度二阶系统冲击响应谱（ＳＲＳ）的几种常用的数字化分析方法：直接积分法；快速富氏变换（ＦＦＴ）法；递推法；数字滤波器方法；改进的数字滤波器方法。并比较了它们的优缺点。     

壁压法在非矩形风洞中的应用

 解决大攻角洞壁干扰修正的壁压法,是利用一定数量固定位置和形状的线源和线涡来模拟风洞内模型的堵塞效应和升力效应。矩形风洞实验段边界对绕模型流动的影响,可用两个方向有限层的镜像线源和线涡来代替,并利用在风洞上下壁和侧壁上测压点处测量所得     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

Experimental Aspects of Mid-Frequency Pulsations (f≈10–100 mHz) in the Southern Polar Cap

We review the results obtained in the frequency range of Pc3 (22-100 mHz) and Pc4 (7-22 mHz) pulsations at Italian Antarctic stations in the southern polar cap (“Mario Zucchelli”, at Terra Nova Bay, TNB, 80^˚.S; “Concordia”, the Italian/French base at Dome C, DMC, 89^˚.S). The absence of a midnight enhancement in the pulsation power suggests a negligible substorm influence at extreme latitudes, while the sharp noon enhancement, which appears only at TNB, is determined by the closer proximity of the station to cusp related phenomena. The relationship between the frequency of the band-limited signals and the interplanetary magnetic field strength, the cone angle influence, and the higher correlation of the Pc3 power with the solar wind speed in the morning hours suggest a global scenario in which upstream waves would be mainly responsible for the mid-frequency activity in the polar cap. However, the polarization pattern is odd with respect to the predictions for tailward propagating modes.     

基于N-S方程的翼型实验侧壁边界层控制

使用三维可压、雷诺平均N-S方程数值计算了NACA0012翼型在二元翼型风洞中不同迎角和马赫数状态下的压力分布,改进了划分计算网格的Hilgenstock方法,发展了一种利用N S方程计算结果,来确定翼型实验中为消除侧壁边界层干扰的抽气压力的方法。通过比较利用本文介绍的方法计算的NACA0012翼型实验侧壁抽气压力和相同状态下,在西北工业大学0.3m×0.1m二维跨音速风洞中经油流显示证明为合适的抽气压力,结果表明该方法是可行的。     

飞机座舱有机玻璃机械加工应力测量方法研究

 通过实验研究了有机玻璃由于机械加工所产生的双折射条纹的性质及其与机械加工应力的关系;建立了一种定量测定和无损检测平板有机玻璃和飞机座舱有机玻璃件机械加工应力的新方法:用光弹性仪可以测得与双折射有关的干涉条纹,则可确定加工应力。     

挤压工艺对镁合金组织性能的影响

介绍了ＭＢ１５镁合金棒材和型材的挤压成形工艺，以及不同挤压成形工艺生产的棒材，型材的组织及性能情况。论述了一次和二次压成形工艺对镁合金棒材和型材的组织、性能的影响。     

美陆军制导武器试验半实物仿真技术综述

主要综述美国陆军制导武器试验的仿真技术和设施，同时介绍仿真试验中使用的几种典型的目标景象投影技术，并说明了它们的应用范围和优缺点。最后介绍了当前制导武器试验仿真技术的发展趋势。     

TiFe0．86Cr0．1／NaM复合贮氢材料的合成与性质

 利用蒸汽相法制备沸石技术合成ＴｉＦｅ０．８６Ｃｒ０．１／ＮａＭ复合贮氢材料的各种条件,找到了较适宜的碱度ＳｉＯ＿２／Ａｌ＿２Ｏ＿３以及合金与沸石。研究了合成条件对贮氢容量的影响,结果表明,沸石为单一晶相合成粒度不低于７４μｍ为佳。同时,该材料亦表现出良好的抗Ｏ＿２、ＣＯ＿２中毒特性。     

如何考虑工程模拟器的逼真度和有效性

工程模拟器的模拟逼其变和有效性是工程模拟界普遍关心的一个非常重要的问题.本文根据SB—100飞行模拟器系统综合、试验和验收过程中的一些做法及模拟试验结果和试飞结果的对比讨论了模拟的逼真度和有效性问题.