运用线性回归进行制导精度折合

同一仪表的工具误差,对不同弹道的影响(如落点偏差)是不同的。本文避开传统的分离误差系数方法,而运用线性回归方法,依据试验弹道的遥、外测参数直接折合出仪表误差造成的正常弹道落点偏差,以提供对型号弹进行精度鉴定的可靠验前信息。在折合方法中利用AIC(Akaike Information Criterion)准则选择自变元及消去变换法实施运算。给出了对典型弹的数字仿真结果、数例说明该方法有较高的折合精度。     

基于Web的复杂武器装备采办综合集成研讨厅的研究

以飞机采办项目中的决策支持为研究对象,在分析综合集成研讨厅在面向飞机的武器装备采办系统中的重要地位的基础上,提出了一种基于Web、面向飞机的武器装备采办综合集成研讨厅的体系结构,分析讨论了实现综合集成研讨厅的关键点,并设计开发了基于Web的武器装备采办综合集成研讨厅原型系统.本文通过研究证实,综合集成研讨厅在面向飞机的...     

Comparison of alternative route selection strategies based on simulation optimization

Air traffic flow management (ATFM) is a collaborative process between the airspace provider and the airspace users. The result of the collaboration should be an outcome that maxi-mizes the utility of the system without excessively penalizing any of the agents. This paper develops a discrete-event simulation model which consists of aggregate departure/arrival airports, flight routes, and sectors for evaluating the alternative collaborative route selection strategy. Given the different perspectives from air traffic control center (ACC) and airlines, eight performance-metrics and five alternative route selection strategies represent the past, current and proposed air traffic flow management operations that were evaluated. The Monte Carlo method combined with the Optimal Computing Budget Allocation (OCBA) simulation optimization technique is employed to assess the performance of different strategies. A case study of the upper air routes in central and southern China shows that the proposed model can be readily implemented to simulate different kinds of air traffic flow management strategies and predict the effect of changes on the airspace sys-tem. It also shows that the proposed alternative collaborative route selection strategy is an effective way in alleviating the en-route traffic congestion.     

Hybrid calibration method for six-component force/torque transducers of wind tunnel balance based on support vector machines

A hybrid calibration approach based on support vector machines (SVM) is proposed to characterize nonlinear cross coupling of multi-dimensional transducer. It is difficult to identify these unknown nonlinearities and crosstalk just with a single conventional calibration approach. In this paper, a hybrid model comprising calibration matrix and SVM model for calibrating linearity and nonlinearity respectively is built up. The calibration matrix is determined by linear artificial neural network (ANN), and the SVM is used to compensate for the nonlinear cross coupling among each dimension. A simulation of the calibration of a multi-dimensional sensor is conducted by the SVM hybrid calibration method, which is then utilized to calibrate a six-component force/torque transducer of wind tunnel balance. From the calibrating results, it can be indicated that the SVM hybrid calibration method has improved the calibration accuracy significantly without increasing data samples, compared with calibration matrix. Moreover, with the calibration matrix, the hybrid model can provide a basis for the design of transducers.     

某型教练机油门操纵系统支座裂纹分析与研究

针对某型教练机发动机油门操纵系统支座裂纹现象,对其进行了材料特性、安装位置及形式、载荷、强度校核、装配应力和理化分析,结果表明,铆钉孔周向干涉配合或强迫装配使其上壁板与背板交界拐角处弯曲产生的拉应力,使表面防护层被破坏,随后在拉应力和腐蚀环境的共同作用下导致支座开裂.     

舰载机飞行员驾驶技术与飞行安全研究

针对无法将驾驶技术和飞行安全建立有效定量关联的现状,基于自适应飞机驾驶员最优控制模型,应用飞行员着舰多层次模糊综合评价方法,通过设定不同的飞行员模型参数,参照着舰技能评价体系,建立了飞行员着舰技能样本库.通过多元非线性回归方法,建立了飞行员技能的多元非线性回归模型,并通过剩余标准差和样本比对法证明了这一模型的准确性.可以通过测定上述飞行员参数,运用该飞行技能回归模型,为飞行员选拔提供参考.     

小展弦比飞翼亚、跨、超声速支撑干扰研究

通过数值模拟方法研究了小展弦比飞翼标模在0.6、0.9、1.5三个典型马赫数下的支撑干扰特性,分别考虑了近场尾部外形局部畸变和尾支杆干扰及远场风洞中部支架干扰,并基于表面压力系数差异为准则尝试对近场干扰量进行分解。研究得到如下结论:马赫数0.6时,远场支撑阻力系数和俯仰力矩系数的干扰量约占总支撑干扰量的30%,升力系数约占20%;马赫数0.9、迎角2°时,阻力系数远场支撑干扰量占总支撑干扰量的40%,迎角18°时,远场支撑干扰使得涡破裂位置提前;马赫数1.5时,远场支撑干扰可以忽略;基于表面压力系数差异将支撑干扰量分解的方法在亚声速支撑干扰前传明显时不适用,在马赫数0.9、迎角2°时求得近场支撑干扰使得马赫数减小约0.02,迎角减小约0.1°,马赫数1.5时用此法求得马赫数和迎角的干扰量均约等于0。     

套筒式张线天平的研制

根据民机张线测力试验的特殊要求,研制了一台套筒结构形式的张线天平。详细介绍了该天平在研制中遇到的难点、关键技术的解决措施以及研制的结果。天平元件布置在58mm的外套筒上,内杆直径为44mm,外套筒和内杆通过楔块焊接在一起。法向力、俯仰力矩和滚转力矩为拉压变形,横向力和偏航力矩为＂S＂形变形,轴向力为弯曲变形,元件支撑部分受拉压变形且刚度较强。通过对天平进行有限元分析,在法向力和俯仰力矩作用下,得出的应变结果与实际输出基本吻合。风洞试验结果表明：天平设计合理,天平外套筒、内杆及张线支撑系统刚度好,天平各分量测量精度高。     

Design considerations for sustainable spacecraft water management systems

It is well recognized that water handling systems used in a spacecraft are prone to failure caused by biofouling and mineral scaling, which can clog mechanical systems and degrade the performance of capillary-based technologies. Long duration spaceflight applications, such as extended stays at a Lunar Outpost or during a Mars transit mission, will increasingly benefit from hardware that is generally more robust and operationally sustainable over time.