基于强度退化的齿轮可靠性计算模型研究及应用

为了研究强度退化对齿轮可靠性的影响,针对一般工作环境下具有多种失效模式的齿轮,通过引入条件概率,考虑零件失效相关性和材料性能退化因素,利用动态应力-强度干涉模型建立基于强度退化的齿轮可靠性的计算模型。以某型齿轮可靠度计算为例,其计算结果表明:在考虑材料强度退化时,齿轮的可靠度随工作时间的增加不断降低,验证了该计算模型的准确性。     

基于神经网络模型的襟翼主动控制旋翼减振分析

基于径向基函数(Radial basis function,RBF)神经网络构建了一种带后缘襟翼主动控制(Active controlled flap,ACF)的旋翼振动载荷计算模型。采用正交试验方法确立RBF网络训练样本的输入,在CAMRAD II中计算前飞状态下与训练样本对应的旋翼桨毂六力素,并将主通过频率下的分量作为样本输出,对RBF网络进行离线训练。在此基础上采用多周控制器对被控模型进行振动载荷主动控制。随后以2桨叶4m直径ACF旋翼为例,构建了其桨毂减振分析方法,并对桨毂动载荷各分量的减振效果进行了分析。研究表明,采用正交样本训练的RBF网络能够精确映射襟翼偏角与桨毂振动载荷的非线性关系,施加多周控制后,桨毂垂向振动载荷降低接近50%,其他方向的振动载荷也有不同程度的降低。     

细长杆降低超声速客机气动噪声的数值分析

在超声速客机机头加装适当的细长杆可以降低飞行噪声。本文借助基于AUSM+格式的准三维数值模拟手段对7组13种细长杆方案做了分析比较,总结出了近场气体参数与远场气体参数之间的关系的规律。文章还从气体动力学理论和激波理论出发,对数值模拟结果作了解释,并揭示了细长杆降噪效果与细长杆外形的内在联系,以及近场、远场两者关系的经验公式。文章从各种方案中选取了降噪效果较好的细长杆方案做三维流场分析,并通过流固耦合计算对其结构强度做了校核,验证了方案的可行性。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

A salient edges detection algorithm of multi-sensor images and its rapid calculation based on PFCM kernel clustering

Multi-sensor image matching based on salient edges has broad prospect in applications, but it is difficult to extract salient edges of real multi-sensor images with noises fast and accurately by using common algorithms. According to the analysis of the features of salient edges, a novel salient edges detection algorithm and its rapid calculation are proposed based on possibility fuzzy C-means （PFCM） kernel clustering using two-dimensional vectors composed of the values of gray and texture. PFCM clustering can overcome the shortcomings that fuzzy C-means （FCM） cluster- ing is sensitive to noises and possibility C-means （PCM） clustering tends to find identical clusters. On this basis, a method is proposed to improve real-time performance by compressing data sets based on the idea of data reduction in the field of mathematical analysis. In addition, the idea that kernel-space is linearly separable is used to enhance robustness further. Experimental results show that this method extracts salient edges for real multi-sensor images with noises more accurately than the algorithm based on force fields and the FCM algorithm; and the proposed method is on average about 56 times faster than the PFCM algorithm in real time and has better robustness.     

An artificial neural network approach for aerodynamic performance retention in airframe noise reduction design of a 3D swept wing model

With the progress of high-bypass turbofan and the innovation of silencing nacelle in engine noise reduction, airframe noise has now become another important sound source besides the engine noise. Thus, reducing airframe noise makes a great contribution to the overall noise reduction of a civil aircraft. However, reducing airframe noise often leads to aerodynamic perfor-mance loss in the meantime. In this case, an approach based on artificial neural network is intro-duced. An established database serves as a basis and the training sample of a back propagation (BP) artificial neural network, which uses confidence coefficient reasoning method for optimization later on. Then the most satisfactory configuration is selected for validating computations through the trained BP network. On the basis of the artificial neural network approach, an optimization pro-cess of slat cove filler (SCF) for high lift devices (HLD) on the Trap Wing is presented. Aerody-namic performance of both the baseline and optimized configurations is investigated through unsteady detached eddy simulations (DES), and a hybrid method, which combines unsteady DES method with acoustic analogy theory, is employed to validate the noise reduction effect. The numerical results indicate not merely a significant airframe noise reduction effect but also excel-lent aerodynamic performance retention simultaneously.     

以先进的制造技术和管理取得竞争优势

针对如何提高机械加工的生产效率,改进生产管理结合实际工作做了论述,提出了自己的观点。     

汽车空气动力学的特点与问题

本文简述了汽车空气动力学的基本特点,并部分结合作者的研究成果论述了汽车空气动力学的主要问题。     

小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。