Mechanical behavior and properties of fiber reinforced ceramic matrix composites for high temperature use

Ceramics can keep their mechanical characteristics up to 2 000℃ or higher.In this paper,A model to predict ultimate strength of continuous fiber-reinforced brittle matrix composites is developed.A statistical theory for the strength of a uni-axially fiber-reinforced brittle matrix composite is presented.Also a semi-empirical frictional heating method for estimating in-situ interfacial shear in fiber-reinforced ceramic matrix composites was improved.Local uneven fiber packing variation as well as uneven micro-damage during fatigue can be expected to have effects on the composites:generation of frictional heating,thermal gradients,and residual stresses around local fiber breaks.This study examined those engineering interests by the finite element method.      

开孔变刚度层合板压缩屈曲性能研究

针对开孔变刚度层合板,建立3种尺寸的层合板有限元模型,采用了线性屈曲、引入残余热应力的线性屈曲和引入初始缺陷的非线性屈曲的3种分析方法,研究了开孔层合板在压缩条件下的屈曲行为,并通过自动铺丝制造层合板进行试验对比,对3种方法的合理性进行了分析。结果表明,引入残余热应力的线性屈曲分析方法与试验结果最吻合,两者仅相差0.63%。基于该方法,讨论开孔层合板残余热应力分布特点和应力水平,得出了开孔层合板的应力分布云图和应力分布规律,计算出残余热应力对开孔复合材料层合的屈曲影响。结果表明,残余热应力对传统直线开孔层合板的屈曲载荷影响很小,仅提高了3.57%,但大大提高了变刚度开孔层合板的屈曲载荷,最多可达23.40%。说明纤维曲线铺放可以改变内部残余热应力的分布,提高整个开孔层合板承载压缩载荷的能力。     

Analysis of crack opening stresses for center- and edge-crack tension specimens

Accurate determination of crack opening stress is of central importance to fatigue crack growth analysis and life prediction based on the crack-closure model. This paper studies the crack opening behavior for center- and edge-crack tension specimens. It is found that the crack opening stress is affected by the crack tip element. By taking the crack tip element into account, a modified crack opening stress equation is given for the center-crack tension specimen. Crack surface displace- ment equations for an edge crack in a semi-infinite plate under remote uniform tension and partially distributed pressure are derived by using the weight function method. Based on these displacements, a crack opening stress equation for an edge crack in a semi-infinite plate under uniform tension has been developed. The study shows that the crack opening stress is geometry-dependent, and the weight function method provides an effective and reliable tool to deal with such geometry depen- dence.     

对直升机齿轮齿根应力分布规律的研究

本文不但指出并纠正传统齿轮齿根应力分析中的错误及不妥，而且还提出一组可确定直升机齿根剖面上正应力、剪应力以及主应力等分布规律的解析表达式。     

直齿锥齿轮齿根应力的有限元分析

根据展成法加工的直齿圆锥齿轮的齿面和齿根过渡曲面方程，建立了轮齿弯曲强度计算的精确的有限元模型，用柔度矩阵法确定接触线上的载荷分布，进行计算齿根应力，根据上述方法，编制了相应的微机程序，本程序可一次求解多个啮合位置的载荷分布、轮齿变形和齿根应力，并可计算双齿对工作时各对齿上的载荷、变形和应力，便于对直齿锥齿轮弯曲强度进行全面分析，算例表明，本文结果与其它文献结果吻合良好。     

热弹塑性蠕变应力有限元分析

对处在高温下工作的发动机结构和核反应堆结构进行非弹性分析，以塑性力学增量理论为基础，采用Ｈｓｕ－Ｂｅｒｔｅｌ多项式函数的流动曲线，导出了热弹塑性蠕变应力分析的本构方程及相应的有限元列式，将热弹塑性蠕变有限元程序进行移植、修改；选取典型算例进行数值试验，与算例已有结果比较，符合良好，从而验证了本模型和程序的可靠性和有效性。     

等厚度楔形杆应力分析的实验验证

用电测实验方法对等厚度对称楔形杆进行拉伸，弯曲实验，测定几个特殊位置及任意位置点的应力值，实验值与应力分析封闭解得到的理论值比较一致，证明了等厚度楔形杆的解是正确的。     

Residual stress determination in friction stir butt welded joints using a digital image correlation-aided slitting technique

This paper presents an incremental cutting method for evaluating the longitudinal residual stresses in a butt welded thin plate via combining the traditional residual stress measurement methods and the advanced optical technique.The proposed approach,which can be called digital image correlation (DIC)-aided slitting technique,introduces a successive extension slot to a speci men and employs the DIC technique to measure the released displacement profiles of the cutting sections after each cutting increment.Then the displacement profiles are used to directly calculate the residual stress distributions up to the slot tip and hence,a stress distribution can be obtained after a cutting increment.Finally,all of the stress distributions are averaged to ultimately determine the original residual stress field.This method does not include any complex experimental operations or tedious derivation,and the resolution of stress variation is greatly improved by the continuous measurement of the released displacements.The presented method has been preliminarily verified by a specimen with residual stress introduced by a four-point bending test.The results show that residual stresses determined by the DIC-aided slitting technique agree well with those from finite element (FE) prediction.The residual stress in a friction stir welded aluminum specimen obtained by the presented technique is also consistent with the evaluations given by X-ray diffraction.Fur thermore,the residual stresses obtained by the DIC-aided slitting technique demonstrate higher accuracy and stability than the evaluations derived by the DIC-aided contour method.     

基于改进SST模型的分离流动数值模拟

对SST湍流模型进行了改进,并通过对典型分离流动进行数值模拟,来检验和提高模型预测分离流动的能力.基于亚声速分离流动,提出了提高雷诺应力的模拟精度和分离流修正的改进方法,并进行了对比研究得出结论;在亚声速分离流动分析结论基础上,采用了可压缩性修正方法,开展了跨声速、超声速和高超声速激波/边界层干扰分离流动的数值模拟研究.结果表明:提高雷诺应力的模拟精度和采用分离流修正明显地提高了SST湍流模型对分离流动的模拟能力;适当地可压缩性修正对超声速和高超声速分离流动的计算精度有改善作用.     

热固性树脂基复合材料固化变形研究进展

热固性树脂基复合材料结构在热压罐成型过程中,由于模具的约束作用,会导致工件内部残余应力的产生,进而引起工件回弹变形和翘曲变形.对影响残余应力和变形产生的各种因素进行了综述及分析,这些因素包括热膨胀、固化收缩、铺层方式、固化温度、模具热膨胀、气孔含量、热梯度分布、纤维含量梯度分布、降温速率、固化时间、纤维含量、模具表面处理、模具角半径和模具热传导性能.