新一代运载火箭

综述了国内外运载火箭的现状 ,指出了国内运载火箭技术上的差距以及研制新一代运载火箭的必要性与基本思路 ,提出了新一代运载火箭的总体技术方案 ,并对方案论证与工程实施中的几个主要问题进行了探讨     

防火墙与网络入侵检测联动系统研究

针对目前防火墙和网络入侵检测系统在网络安全体系中存在的不足 ,提出了一个基于防火墙和网络入侵检测联动系统的框架模型 ,它有效克服了传统入侵检测系统不能实现主动控制的缺陷和防火墙规则配置的复杂性等问题。最后 ,从实现的角度 ,给出了整个联动系统的详细解决方案———采用基于连接检测的包过滤防火墙和基于状态转换分析的网络入侵检测系统相结合。其提高了系统的检测速度和检测的精确性并有效的降低了虚警率     

飞机性能优化研究

本文用能量状态近似法和奇异摄动法两件方法讨论了最优飞行剖面的生成.并以某机为例,用能量状态近似法求出了给定航程下的最优飞行剖面和给定初、末状态的爬升飞行剖面;为了对两种方法比较,也给出了奇异摄动法求得的爬升剖面.     

基于Riccati方程的离散容错控制系统设计

基于离散系统的Ｒｉｃｃａｔｉ方程，提出一种对传感器失效具有完整性的离散控制系统的设计方法，给出了完整性设计方法的设计步骤，并用设计实例验证了该方法的有效性．该方法还可推广用于执行器失效的情况．     

直升机涡环状态试验数据处理研究

采用神经网络误差反向传播算法,以旋翼涡环状态试验数据为基础,研究了桨叶负扭度对直升机涡环状态特性的影响,分析了负扭度变化对旋翼扭矩、拉力平均值及脉动幅度的影响。计算结果表明,神经网络模型能够准确预测桨叶负扭度对直升机涡环状态的影响。     

一种TASIMM-UKF导弹状态估计方法

为了提高对机动导弹状态估计的精度和速度,提出了一种三轴分离IMM-UKF(TASIMM-UKF)滤波算法。将导弹运动状态按坐标轴方向进行三轴分离,并基于CV,CA和CJ模型集,采用无迹卡尔曼滤波器并行估计导弹三轴状态信息,有效地解决了导弹不同运动轴间的模型竞争问题。仿真结果表明,该方法能有效提高状态估计精度,缩短了估计时间,对复杂大机动目标状态估计具有良好的性能。     

AADL在航天器控制系统设计中的应用研究

以某型号航天器为例提出了一种使用体系结构分析和设计语言(AADL,architecture analysis & design language)分层次建模的方法,建立控制系统软件及软件与硬件之间的交互模型.采用状态自动机方式描述串口通信协议,以便分析模型.     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

Multi-state autonomous drilling for lunar exploration

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo-rithm, lunar drilling process was categorized into three drilling states:the interface detection, initi-ation of drilling parameters for recognition and drilling medium recognition. Support vector machine (SVM) and continuous wavelet transform were employed for the online recognition of dril-ling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detect-ing drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.