Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors

The aim of this study is to define optimal tooth modifications, introduced by appropriately chosen head-cutter geometry and machine tool setting, to simultaneously minimize tooth contact pressure and angular displacement error of the driven gear (transmission error) of face-hobbed spiral bevel gears. As a result of these modifications, the gear pair becomes mismatched, and a point contact replaces the theoretical line contact. In the applied loaded tooth contact analysis it is assumed that the point contact under load is spreading over a surface along the whole or part of the ’’potential’’ contact line. A computer program was developed to implement the formulation provided above. By using this program the influence of tooth modifications introduced by the variation in machine tool settings and in head cutter data on load and pressure distributions, transmission errors, and fillet stresses is investigated and discussed. The correlation between the ease-off obtained by pinion tooth modifications and the corresponding tooth contact pressure distribution is investigated and the obtained results are presented.     

Experimental investigation on deformation behavior of TJ-1 lunar soil simulant subjected to principal stress rotation

The knowledge of mechanical properties of lunar soil is of fundamental importance for the coming exploration of the Moon. This paper aims to investigate the fundamental deformation behavior of lunar soil and the effects of the intermediate principal stress coefficient, deviatoric stress ratio, and mean stress during the principal stress rotation. First, an improved technique was proposed to generate homogeneous samples based on the Multi-layer Undercompaction Method. Second, three series of tests on TJ-1 lunar soil simulant under the principal stress rotation were performed with a hollow cylinder apparatus at Tongji University, China. In each series of tests, only one value of the three variables mentioned above was changed while the others were kept constant. The test results demonstrate that the rotation of principal stress can result in significant plastic deformation, volumetric strain, and non-coaxiality (non-coincidence of the increment direction of principal plastic strain with the principal stress direction) of TJ-1 lunar soil simulant. In addition, it is found that the intermediate principal stress coefficient, deviatoric stress ratio, and mean stress have different influences on the four strain components, i.e. _εz,_εr,_εθ${\epsilon }_z\text{,}{\epsilon }_{\text{r}}\text{,}{\epsilon }_{\theta }$ and _γzθ${\gamma }_{z\theta }$, volumetric strain, and non-coaxiality during the principal stress rotation. The influence of deviatoric stress ratio is relatively stronger than the others. Therefore, the influence of principal stress rotation on the deformation behavior of lunar soil should be taken into account carefully in the design and construction of facilities on the lunar surface in the future.     

基于传动误差和齿面印痕控制的弧齿锥齿轮小轮加工参数的设计(英文)

This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.     

基于Event的侧向碰撞风险改进模型

Event模型是一种基于长方体碰撞模板的碰撞风险评估模型,用该模型评估所得的碰撞风险概率过于保守。将碰撞模板改为圆柱体,建立了基于碰撞圆柱体的Event模型。在相同条件下运用Event模型和改进的Event模型对平行航路的侧向碰撞风险进行了评估计算,后者的碰撞风险是原Event模型碰撞风险的86.9％,仿真结果表明改进模型碰撞风险评估更精确,能够为中国平行航路的开辟进行安全评估计算提供理论依据。     

用MLFIPWA求解二维介质柱电磁散射

将多层快速非均匀平面波算法（MLFIPWA）用于求解二维介质柱的电磁散射,给出了计算模型。在积分方程法求解电磁散射中,用快速非均匀平面波算法（FIPWA）对目标分层分组,附近区直接计算,非附近区通过聚合、转移和配置加速矩矢相乘,减小MLFIPWA的数值计算量。算例表明：MLFIPWA特别适于处理电大尺寸目标的电磁散射。     

N5B燃油系统试验转台计算机控制系统设计

对N5B燃油系统试验台的台架转动角度控制系统建立进行设计分析,介绍了试验台架的结构方式与运转驱动形式、控制系统组成、计算机控制算法设计,以及在实际应用中,为改善控制品质所采用硬件的改进方法。     

车床飞刀梯形螺纹法的研究

传统车制梯形螺纹是工件旋转、车刀等速移动,形成螺旋线。本文介绍了采用车刀旋转、工件等速移动,从而形成梯形螺旋线的新方法,该方法扩展了普通车床加工范围,解决了大型件无法加工的难题。     

螺旋型喷嘴液滴分布特性及液滴直径经验公式的拟合

螺旋型喷嘴是压力式喷嘴的一种,它能提供细密的水雾,在工程上具有广泛的用途.笔者分析了几种常用的表征液滴尺寸的参数,用因次分析的方法建立了螺旋型喷嘴液滴直径的准则关系式,通过实验研究了TF6喷嘴的雾化液滴几种常用的直径随喷雾压力的变化规律,用最小二乘法回归了TF型喷嘴雾化粒子的几种直径(D0.1、D0.5、D0.9、D32)的经验公式.     

麻花钻钻尖锥面刃磨参数优化求解

麻花钻锥面刃磨方法有4个刃磨参数,当给定外缘转点的结构圆周后角、横刃斜角、锋角这3个结构参数时,后刀面的形状并不唯一.为了获得唯一的后刀面廓形,必须增加一个辅助参数.可供选择的补充参数有尾隙角、横刃后角、周边后角、切深后角等.这样,当给定一个补充参数后,4个设计参数就可以决定4个刃磨参数.然而单独使用某一个补充参数,就忽略了其余参数的影响.采用优化的方法来求解刃磨参数,将各个补充参数和刃磨参数的实际可调范围作为约束条件,就可以得到满足一定要求的最优解.     

基于在轨组装维护的多载荷协同观测卫星平台构型设计

针对高轨遥感卫星多载荷协同观测和一致测量应用需求,在前期总体技术方案研究的基础上,通过开展现有在轨组装航天器和高轨卫星公用平台的构型调研,提出了一种适用于多载荷协同观测需求的平台构型设计方案。平台利用CZ-5运载火箭发射并在轨展开,采用“网格式中心承力筒+板+桁架”式的总体构型,开展了主传力路径、贮箱承载结构、网格式中心承力筒等的细化设计工作,并进行了结构产品的初步设计,建立了平台结构整星的有限元模型。仿真分析表明:平台结构整星的各向一阶频率均能满足运载火箭的频率要求。基于标准化、通用化的平台接口设计,使其具备可扩展及可维修的能力,大大提升了平台鲁棒性。基于全网格筒的主承力设计,增强平台结构承载能力,并改善平台内部热环境。该设计方案可为基于在轨组装维护的高轨遥感大平台结构的设计提供有价值的参考。