高水压环境下机械位移机构设计

介绍了一套用于辅助计量测试的高水压环境下机械位移机构设计实例,详细讨论了10MPa水压环境下电机密封装置设计,水下位移机构导向传动机构的设计方案等。电机密封装置是为某型号步进电机专门设计的密封外壳,它采用车氏密封标准产品为基础设计动密封结构,采用O型橡胶圈解决静密封问题;水下位移机构的设计以光轴为位移导向,以万向滚珠为回转导向,以齿轮齿条和梯形丝杠为位移传动方式,细节上采用了一些非常规的设计结构和处理方式。     

适于长传播时延无线网络的快速预约按需发送MAC协议

为解决无线网络中长传播时延所带来的信道资源利用率低的问题,提出一种基于快速预约按需发送(FRODT)的媒质接入控制(MAC)协议.该协议利用中心控制节点(CCN),在两个信道上安排各节点的分组预约和发送,保证了各节点可以在一帧中无碰撞地发送一个或多个业务分组,并且各节点通过一次握手预约即可完成整个通信会晤的业务分组发送...     

齿距啮合偏差对准双曲面齿轮传动误差的影响

由齿轮机构的总体传动误差概念引申出含有齿距啮合偏差的单齿传动误差,并根据齿面的几何关系,给出齿距啮合偏差对单齿传动误差曲线影响的偏移式;然后,在Y9550型滚动检验机的基础上搭建传动误差检测平台并进行测量试验,得到准双曲面齿轮副两种传动误差的测量结果;最后,利用JD45+型齿轮测量机所测的齿距偏差数据对理论传动误差曲线进行修正,进而分析了轮齿的啮合状态.通过对理论与实际传动误差曲线的对比,验证了齿距啮合偏差对传动误差的影响方式.试验结果表明:在轻载条件下,实际单齿传动误差可近似由理论设计曲线和齿距啮合偏差组成的综合仿真曲线来替代,从而为进一步研究实际工况下齿轮传动的运动精度和工作平稳性奠定了基础.      

利用光纤进行高精度时间传递

描述了一种利用光纤TV信道传递时间、频率的初步方案和光纤闭环TV信道时延的测定及用扩频副载波复用系统进行双向时间传递方法。     

Aero-optical effects simulation technique for starlight transmission in boundary layer under high-speed conditions

Aero-optical effects for starlight transmission in the high-speed flow field will reduce the accuracy of the star sensor on an aircraft. Numerical simulations for aero-optical effects usually require plenty of calculations, which cause difficulties when designing a celestial navigation system for a high-speed aircraft. In this study, an Aero-Optical Simulator For Starlight Transmission (AOSST) in the boundary layer is developed. It effectively reduces the computational burden compared to that of the widely used CFD simulation, and it achieves satisfactory accuracy. In this simulator, gas ellipsoids satisfying certain design rules are used to simulate coherent density structures in boundary layers. Design rules for the gas ellipsoids are found from published experimental and high-fidelity CFD simulation results. The generated wavefront distortion by AOSST is anchored with the scale law for aero-optical distortion in the boundary layer by determining some control parameters, which enables the simulator to output reliable results over a wide range of flight states. Four numerical examples are provided to verify the performance of AOSST. The results demonstrate that AOSST is able to simulate the directional dependence of aero-optical distortions in boundary layers, the variation trend of distorted wavefront shapes with Reynolds number, and the grayscale distribution on the disturbed star map.     

CCPT系统中基于副边阻抗调制技术的反向信号与能量叠加传输技术研究

为了解决金属环境条件下的无线供电和信号传输需求，提出了一种基于电容耦合方式的无线能量和信号并行传输方案。通过建立E类放大器的数学模型，分析电容耦合系统的传输特性和阻抗影响机理，设计了适用于E类放大器结构的调制与解调电路，并通过仿真验证了电路的可行性，为CCPT系统从能量传输到信号回传提供了系统性的理论指导。     

Best practices for model-based and simulation-aided engineering of power transmission and motion control systems

This paper deals with the modelling and simulation of aircraft systems, in particular for power transmission and control. It is intended to review, propose and disseminate best practices for making model-based/simulation-aided engineering more efficient at any phase of the system life cycle. The proposals are aimed at creating value, not only by increasing the performance of the product under study but also by shortening the time to market, capitalizing knowledge, mitigating risks and facilitating concurrent engineering. The needs associated with the engineering activities are firstly identified to define a set of requirements for the models. Then, these requirements are used to drive the considerations leading to model development, focusing in particular on the process, modelled physical effects, modelling level, model architecting and concurrent engineering. The third part deals with the model implementation, giving special consideration to the different types of models, causalities, parameterization, implementation and verification. Each part is illustrated by examples related to safety critical actuators.     

卫星通信全代理同态可信传输机制研究

卫星通信及应用已经成为当前社会生活的重要组成部分。为了解决卫星通信数据安全传输、信息隐私保护、接收端信息依赖等问题，基于低轨卫星气象数据传输的典型应用场景，提出了一套全代理同态加密传输模型（FPRM），并依据卫星通信系统架构将其实例化，从而设计卫星通信全代理同态可信传输系统与运行机制。该机制增加系统的通信安全和隐私保护，实现密文的可计算和传输全代理，有效融合卫星、商业数据中心以及互联网资源，降低运行成本，提高资源利用率，具有重要的实际意义和应用价值。最后，通过试验证明该模型的性能和数据扩展性具有可行性。     

具有时变刚度传动误差及间隙的齿轮系统动力学分析

建立了 ４ 自由度的直齿圆柱齿轮系统的非线性动力学方程。该方程包含了时变啮合刚度、传动误差及间隙。利用齿轮结构的旋转对称性,提出了用一个啮合齿对上的参数表示其它啮合齿对上参数的方法。为了求解方程,提出了一种有效的数值方法——基于打靶法的局部参数化延拓法。该方法不但能够得到非线性振动微分方程的周期解,而且特别适合处理含奇异点的非线性特征值问题。最后给出了一个数值计算示例。     

频率选择表面(FSS)柔性屏铺覆工艺对透波窗口透波性能的影响

为了研究工程中柔性FSS屏铺覆工艺对透波窗口通带插损的影响,设计并制备了几种不同工艺缺陷的平板,采用自由空间传输反射法研究了平板在不同入射角下的通带损耗.结果 表明:拼接缝隙使通带损耗在0°和60°入射角下增加了0.3dB;拼接褶皱使通带损耗在0°入射角下增加了0.77 dB,在60°入射角下增加了1.55 dB;多层...