Analysis of the dynamic behavior of structures using the high-rate GNSS-PPP method combined with a wavelet-neural model: Numerical simulation and experimental tests

Recently, the high rate global navigation satellite system-precise point positioning (GNSS-PPP) technique has been used to detect the dynamic behavior of structures. This study aimed to increase the accuracy of the extraction oscillation properties of structural movements based on the high-rate (10?Hz) GNSS-PPP monitoring technique. A developmental model based on the combination of wavelet package transformation (WPT) de-noising and neural network prediction (NN) was proposed to improve the dynamic behavior of structures for GNSS-PPP method. A complicated numerical simulation involving highly noisy data and 13 experimental cases with different loads were utilized to confirm the efficiency of the proposed model design and the monitoring technique in detecting the dynamic behavior of structures. The results revealed that, when combined with the proposed model, GNSS-PPP method can be used to accurately detect the dynamic behavior of engineering structures as an alternative to relative GNSS method.     

A new bearing fault diagnosis method based on modified convolutional neural networks

Fault diagnosis is vital in manufacturing system. However, the first step of the traditional fault diagnosis method is to process the signal, extract the features and then put the features into a selected classifier for classification. The process of feature extraction depends on the experimenters’ experience, and the classification rate of the shallow diagnostic model does not achieve satisfactory results. In view of these problems, this paper proposes a method of converting raw signals into two-dimensional images. This method can extract the features of the converted two-dimensional images and eliminate the impact of expert’s experience on the feature extraction process. And it follows by proposing an intelligent diagnosis algorithm based on Convolution Neural Network (CNN), which can automatically accomplish the process of the feature extraction and fault diagnosis. The effect of this method is verified by bearing data. The influence of different sample sizes and different load conditions on the diagnostic capability of this method is analyzed. The results show that the proposed method is effective and can meet the timeliness requirements of fault diagnosis.     

Application of a PCA-DBN-based surrogate model to robust aerodynamic design optimization

An efficient method employing a Principal Component Analysis (PCA)-Deep Belief Network (DBN)-based surrogate model is developed for robust aerodynamic design optimization in this study. In order to reduce the number of design variables for aerodynamic optimizations, the PCA technique is implemented to the geometric parameters obtained by parameterization method. For the purpose of predicting aerodynamic parameters, the DBN model is established with the reduced design variables as input and the aerodynamic parameters as output, and it is trained using the k-step contrastive divergence algorithm. The established PCA-DBN-based surrogate model is validated through predicting lift-to-drag ratios of a set of airfoils, and the results indicate that the PCA-DBN-based surrogate model is reliable and obtains more accurate predictions than three other surrogate models. Then the efficient optimization method is established by embedding the PCA-DBN-based surrogate model into an improved Particle Swarm Optimization (PSO) framework, and applied to the robust aerodynamic design optimizations of Natural Laminar Flow (NLF) airfoil and transonic wing. The optimization results indicate that the PCA-DBN-based surrogate model works very well as a prediction model in the robust optimization processes of both NLF airfoil and transonic wing. By employing the PCA-DBN-based surrogate model, the developed efficient method improves the optimization efficiency obviously.     

Neural network-based fault diagnosis for spacecraft with single-gimbal control moment gyros

This paper proposes a neural network-based fault diagnosis scheme to address the problem of fault isolation and estimation for the Single-Gimbal Control Moment Gyroscopes(SGCMGs) of spacecraft in a periodic orbit. To this end, a disturbance observer based on neural network is developed for active anti-disturbance, so as to improve the accuracy of fault diagnosis.The periodic disturbance on orbit can be decoupled with fault by resorting to the fitting and memory ability of neural network. Subsequ...     

计算机生成兵力

介绍分布交互仿真（ＤＩＳ）环境中计算机生成兵力（ＣＧＦ）的概念,分析ＣＧＦ系统的原理、结构、特点和主要研究内容。介绍现有的ＣＧＦ系统,分析ＣＧＦ系统与人工智能以及ＣＧＦ实体与ＤＩＳ的３种仿真类型之间的关系。     

车间生产计划与加工过程的集成系统MFAS

在自动化程度低的传统机械加工车间,由于生产计划与加工过程之间缺乏紧密的联系,使得计划对生产现场的管理与控制比较困难。目前开发的物流自动化系统ＭＦＡＳ（Ｍａｔｅ－ｒｉａｌＦｌｏｗｉｎｇＡｕｔｏｍａｔｉｃＳｙｓｔｅｍ）,以层次式的计划管理方法为基础,利用计算机网络和在线式立体仓库,将车间生产计划与加工过程有效地集成为一个整体。     

自适应DR算法研究

首先介绍了 DR算法的基本思想 ,并分析了现有的 DR算法的不足之处。然后提出了一种自适应 DR算法。最后 ,将提出的这种自适应 DR算法与普通 DR算法进行了比较研究。结果表明 ,自适应 DR算法是十分有效的     

拦截弹道快速设计方法

针对传统优化算法在解决多约束条件下拦截弹道设计问题时迭代计算耗时过长的缺点,提出了一种快速拦截弹道设计方法.该方法基于人工神经网络的非线性拟合技术,先通过普通优化算法进行离线样本计算,对样本中目标位置和优化得到的飞行程序参数进行输入-输出映射拟合训练,从而实现在给定目标位置的情况下对最优飞行程序参数的快速计算,达到提高拦截弹道设计效率的目的.经过数值仿真验证,将该方法应用于拦截弹道设计,在保证良好命中精度的同时,设计所需的计算时间大大减少,从而提高了弹道设计的时效性.      

综合路由的无线传感器网络覆盖调度

利用目前公认为理论上最好的无线传感器网络集中式覆盖控制算法MCLC(Most-Constrained Least-Constraining),结合DD(Directed Diffusion)和LEACH(Low Energy Adaptive Clustering Hierarchy)路由协议,基于节点最小剩余能量调度覆盖集,观察最小剩余能量不同选取对节点能耗和均衡性以及网络生存期的影响.研究能耗均衡性和网络生存期的关系,提出了一种新的一般性能耗均衡的覆盖集调度的方法.仿真结果表明:所提方法可以有效提高网络生存期,同时为设计覆盖控制算法和覆盖集调度策略提供理论指导.