参数估计中的系统初始状态确定

极大似然方法是应用比较广泛的一种参数估计方法，具有较好的统计特性，但由于所采用的寻优计算方法的限制，在使用过程中需要将系统的初始状态信息作为计算的起点。针对这个问题开展了一些研究工作，提出了系统初始状态与未知参数联合估计和系统初始状态的极大似然估计两种解决方法，并结合某型旋转导弹的气动参数辨识问题进行了仿真计算。     

行星际空间MHD模拟激波跃变关系分析

分析了模拟得到的可以传播到1AU以远的日地空间磁流体力学激波与Rankine-Hugnoniot跃变关系的符合程度．通过对模拟激波的结构及其在传播过程中的演化进行的分析，提出了模拟激波的定位方法；基于所提出的定位方法，利用向长青提出的确定MHD激波局地参数的方法计算了模拟得到的激波与Rankine-Hugnoniot跃变关系的偏差．结果表明在激波传播到100Rs以后，激波对中前向快激波与Rankine-Hugnoniot关系的符合达到很高的程度，相对误差在10^-2数量级以内；并且在激波传播到150 Rs以后，相对误差在10^-3数量级以内．这个结果说明文中所使用的有限差分数值格式能较好地模拟激波．     

双层多目标规划若干问题的研究

研究了下层决策者无关联的双层多目标规划问题，在不同偏好意义下，给出了各自解的定义，讨论了线性双层多目标规划问题。     

Wilkinson定理扰动界的改进估计

Wilkinson定理是代数特征值问题中的一个经典定理,文章给出了Wilkinson定理的结果中关于扰动矩阵上界的另一种估计形式,并指出该形式对Wilkinson定理具有一定的改进。     

Effect of curing condition on bonding quality of scarf-repaired composite laminates

Both single-face vacuum bag curing (SVC) and double-face vacuum bag curing (DVC) can be used in scarf repair of composite structures. But different curing conditions caused by the sealing state may affect the bonding quality of scarf-repaired structures. In this paper, the effect of curing condition on bonding quality of scarf-repaired laminates was experimentally investigated in terms of surface profiles, moisture absorption curves and section profiles. In order to further explore the moisture absorption mechanism, finite element model of the repaired laminates using DVC was established with moisture diffusion of both the adhesive and composite laminates considered. This model was verified by experimental results. Based on the model of DVC case, the model of SVC case was built by changing moisture absorption parameters of the adhesive. Results show that SVC reduces the bonding quality, mainly reflecting in more adhesive inner voids and patch-to-parent dislocation. And SVC increases moisture absorption rate and moisture equilibrium content of the adhesive, and its effect on the former is far greater than that on the latter.     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

动力失效对起飞纵向气动特性影响数值研究

研究民用飞机动力失效对飞机起飞阶段纵向气动特性的影响规律及其机理,对保证飞机有效操纵和安全飞行具有重要意义.采用在点对点多块结构化网格系统上求解三维可压缩雷诺平均N-S方程的数值方法,研究发动机动力失效对某民用飞机起飞构型纵向气动特性的影响.通过DLR-F11模型验证研究方法对民用飞机高升力构型气动特性的预测能力;针对安装动力短舱的某翼吊涡扇发动机民用飞机起飞构型,通过对比其发动机在正常工况和失效时飞机气动特性的差异,得出动力失效对飞机纵向气动特性的影响规律及机理.结果表明:动力失效后,不但溢流效应会使飞机阻力系数增大;还会导致发动机进、排气特性较正常工作状态明显不同,恶化短舱附近流场,对飞机的升力、失速特性带来不利影响.     

一类滞后不确定相似组合系统的分散控制

本文给出了一个使滞后的相似组合大系统镇定的分散鲁棒控制器的设计方法。不确定性是时变的,是以不确定参数出现在每个子系统中,而存在于互联项中的不确定性假设可能知道它的边界,当系统具有某种特征时,简化了一般控制器的设计。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

计算风工程中几个关键影响因素的分析与建议

通过近几年进行建筑计算风工程的实践与体会,并参考国内外的一些文献,本文给出了合理选取建筑数值风洞大小、最好采用SSTk-ω或BSL雷诺应力湍流物理模型及在建筑模型中的不同区域应按不同的网格尺度要求划分网格的建议;在CFX5软件平台中,对复杂的建筑体型,可选用非结构化网格和四面体单元,对流项的插值格式宜采用接近二阶的混合格式。还选取一立方体建筑模型,通过数值模拟、现场实测和风洞实验结果的比较对建议进行了验证。最后通过未受扰动数值风洞中入口边界条件的保持,给出了适用于我国建筑工程中A、B、C、D四类地面粗糙度类别的入口湍流边界条件,可参考采用。